Any intrest in under 10 sec LIP report

[darkopop]

I seem to trick tetra to send LIP report under 10 sec.

Is there any one ho needs that info, glad to share it.

ps. On dimetra system , mth800 portable radio

[darkopop]

Its seems no interest , I was hopping to discuss about it with some one, and to get some feedback

[pavlebo]

Is it useful for AVL or something else?

[darkopop]

Is it useful for AVL or something else?

Yes, LIP is used in AVL, tetra can get you reports on 30 sec min. automatic, and you can get individual request at 10s.

Have you worked with LIP?

[aqrabawi007]

would you please send more information about LIP ?

[darkopop]

You need to set receiver radio , and send commands to another radios to replay at some time:

1. send command
AT+CMGS=0,1,0,8<CR>0A<CTRL-Z> - command for request for LIP PID

2. send from receiver to monitoring radio BASIC LOCATION PARAMETERS REQUEST
EXAMPLE FOR issi 786 to monitor 111 is

AT+CMGS=111,1,0,64<CR>0A550391C1000312<CTRL-Z>

3. Send to monitoring radio ADD/MODIFY TRIGGER REQUEST
AT+CMGS=111,1,0,45<CR>0A5E6840C08<CTRL-Z>


This is quick start if you have some experience with tetra lip, if you need help send me info about you request over private message

Info abouth LIP PDU in ETSI

http://www.etsi.org/deliver/etsi_ts/100300_100399/1003921801/01.03.01_60/ts_1003921801v010301p.pdf

Best regards

[zeuscane]

This is Master’s thesis at the School of Information and Communication Technology.
Messaging and positioning in a dynamic TETRA environment.

30296

regards
zeuscane

[darkopop]

Thank you zeuscane for that, but i have only 10 point, cant see it.

Do you have professionally experience with tetra, I need complete document AT PROGRAMMERS GUIDE. At moment i have last 7 pages where is described using of LIP protocol at dimetra and I`m wiling to send you over e mail.






















I have work with lip successfully, but need whole document to try same other fetures.

Best regards, Darko

[darkopop]

I look at its thesis but he never mention a single working example step by step how to make tetra radios to report at station. My example above is from ******** document and is tested at field, working with no problem.

But tetra can`t give you report under 10 second . I have managed to do that, but I was hoping to chat with someone who have practical experience and to exchange ours findenings.

To anyone who needs help I am glad to help over private messages.

Best regards