esoestemp
2012-10-19, 10:11 PM
Hi,
Do you know what is the reason A300H:Channel Requests (Packet Call) to be greater than K3000:SDCCH Seizure Requests
From HEDEX:
Immediate Assignment Measurement per Cell(CALL.ImmAss.CELL)
When an MS requires network services for reasons such as the Mobile Originated Call (MOC), Mobile Terminated Call (MTC), emergency call, call re-establishment, location updating, packet call, and Location Measurement Unit (LMU)+Reserved, it sends the BTS a CHAN REQ message on the RACH. After receiving this message, the BTS reports a CHAN RQD message to the BSC for a signaling channel.
And here is real example of this counting:
29929
Thanks in advance!
Do you know what is the reason A300H:Channel Requests (Packet Call) to be greater than K3000:SDCCH Seizure Requests
From HEDEX:
Immediate Assignment Measurement per Cell(CALL.ImmAss.CELL)
When an MS requires network services for reasons such as the Mobile Originated Call (MOC), Mobile Terminated Call (MTC), emergency call, call re-establishment, location updating, packet call, and Location Measurement Unit (LMU)+Reserved, it sends the BTS a CHAN REQ message on the RACH. After receiving this message, the BTS reports a CHAN RQD message to the BSC for a signaling channel.
And here is real example of this counting:
29929
Thanks in advance!