RBS6000 VSWR Value via Moshell

[electron]

Hi friends,


Is there any way to get VSWR value in RBS 6000 via MOshell ? As we have the same for RBS3418



Thanks

[ticoff]

Yes, there is

check this: http://www.finetopix.com/showthread.php?30238-MOShell-VSWR-to-actual-line-values&p=184122#post184122

Please click on thanks if this helps you.

[consultant]

there is an easy way....
install moshell 9.0c an run command cabx on rbs6000, u will get vswr values

BR

[electron]

where did you check it by cabex command we can see VSWR? I think it is not showing this value. Share snapshot
there is an easy way....
install moshell 9.0c an run command cabx on rbs6000, u will get vswr values

BR

[consultant]

####################################################################
# Welcome to MoShell 9.0a (LPA108514/1_R9A) #
# Finn Magnusson, Jan Pettersson #
# http://utran01.au.ao.e*******.se/moshell #
# Contact: Finn.Magnusson@e*******.com #
# Joakim.xo.Ostlund@e*******.com #
####################################################################
Checking ip contact...OK
XXXXX> get 0
9.0a RBS_NODE_MODEL_N_1_50 stopfile=/tmp/24122
=================================================================================================================
0 ManagedElement=1
=================================================================================================================
ManagedElementId 1
applicationConfiguration t[0] =
faultTolerantCoreStates s[1] = ManagedElement=1,Equipment=1,Subrack=1,Slot=1,PlugInUnit=1;Active
healthCheckResult Struct{3}
>>> 1.healthCheckResultCode = 99 (INITIAL_VALUE)
>>> 2.message =
>>> 3.startTime =
healthCheckSchedule t[0] =
logicalName
mimInfo Struct{3}
>>> 1.mimName = RBS_NODE_MODEL_N
>>> 2.mimVersion = 1.50
>>> 3.mimRelease =
mimName RBS_NODE_MODEL_N
productName RBS6601W
productNumber DUW_NO_BACKPLANE
XXXXX> cabx
9.0a RBS_NODE_MODEL_N_1_50 stopfile=/tmp/24122
Trying password from ipdatabase file: /home/xxxx/moshell/sitefiles/ipdatabase...
.....
====================================================================================================================
SMN APN BOARD FAULT OPER MAINT PRODUCTNUMBER REV SERIAL DATE TEMP COREMGR
====================================================================================================================
0 1 DUW2001 OFF ON OFF KDU127161/2 R4C xxxxxxxxxx 20110912 35C Active
--------------------------------------------------------------------------------------------------------------------
================================================================
SMN ProductNr Rev Name Date SerialNr
================================================================
0 SXK 109 8604/1 * Subrack Radio Subrack
----------------------------------------------------------------
====================================================================================================================
SMN APN PORT BOARD FAULT OPER MAINT PRODUCT NR REV SERIAL DATE TEMP AuxPIU
====================================================================================================================
0 1 port_0_dev_5 RRUS01B1 off steady off KRC11876/1 R2C xxxxxxxxxx 20111012 31.8 1/RRUW-1
0 1 port_1_dev_6 RRUS01B1 off steady off KRC11876/1 R2C xxxxxxxxxx 20111012 33.4 2/RRUW-1
0 1 port_2_dev_7 RRUS01B1 off steady off KRC11876/1 R2C xxxxxxxxxx 20111012 31.9 3/RRUW-1
--------------------------------------------------------------------------------------------------------------------
====================================================================================================================
SMN APN PORT BOARD AuxPIU TX1(W/dBm) TX2(W/dBm) VSWR1 (RL1) VSWR2 (RL2) Sectors
====================================================================================================================
0 1 port_0_dev_5 RRUS01B1 1/RRUW-1 17.5 (42.4) 0 1.15 (23.3) 0 S1C1 S1C2
0 1 port_1_dev_6 RRUS01B1 2/RRUW-1 13.6 (41.3) 0 1.09 (26.9) 0 S2C1 S2C2
0 1 port_2_dev_7 RRUS01B1 3/RRUW-1 16.0 (42.0) 0 1.26 (18.9) 0 S3C1 S3C2
--------------------------------------------------------------------------------------------------------------------

[electron]

strange is i do not have the last part for VSWR option in my printout is there any optional parameter or feature to activate it ?!
####################################################################
# Welcome to MoShell 9.0a (LPA108514/1_R9A) #
# Finn Magnusson, Jan Pettersson #
# http://utran01.au.ao.e*******.se/moshell #
# Contact: Finn.Magnusson@e*******.com #
# Joakim.xo.Ostlund@e*******.com #
####################################################################
Checking ip contact...OK
XXXXX> get 0
9.0a RBS_NODE_MODEL_N_1_50 stopfile=/tmp/24122
=================================================================================================================
0 ManagedElement=1
=================================================================================================================
ManagedElementId 1
applicationConfiguration t[0] =
faultTolerantCoreStates s[1] = ManagedElement=1,Equipment=1,Subrack=1,Slot=1,PlugInUnit=1;Active
healthCheckResult Struct{3}
>>> 1.healthCheckResultCode = 99 (INITIAL_VALUE)
>>> 2.message =
>>> 3.startTime =
healthCheckSchedule t[0] =
logicalName
mimInfo Struct{3}
>>> 1.mimName = RBS_NODE_MODEL_N
>>> 2.mimVersion = 1.50
>>> 3.mimRelease =
mimName RBS_NODE_MODEL_N
productName RBS6601W
productNumber DUW_NO_BACKPLANE
XXXXX> cabx
9.0a RBS_NODE_MODEL_N_1_50 stopfile=/tmp/24122
Trying password from ipdatabase file: /home/xxxx/moshell/sitefiles/ipdatabase...
.....
====================================================================================================================
SMN APN BOARD FAULT OPER MAINT PRODUCTNUMBER REV SERIAL DATE TEMP COREMGR
====================================================================================================================
0 1 DUW2001 OFF ON OFF KDU127161/2 R4C xxxxxxxxxx 20110912 35C Active
--------------------------------------------------------------------------------------------------------------------
================================================================
SMN ProductNr Rev Name Date SerialNr
================================================================
0 SXK 109 8604/1 * Subrack Radio Subrack
----------------------------------------------------------------
====================================================================================================================
SMN APN PORT BOARD FAULT OPER MAINT PRODUCT NR REV SERIAL DATE TEMP AuxPIU
====================================================================================================================
0 1 port_0_dev_5 RRUS01B1 off steady off KRC11876/1 R2C xxxxxxxxxx 20111012 31.8 1/RRUW-1
0 1 port_1_dev_6 RRUS01B1 off steady off KRC11876/1 R2C xxxxxxxxxx 20111012 33.4 2/RRUW-1
0 1 port_2_dev_7 RRUS01B1 off steady off KRC11876/1 R2C xxxxxxxxxx 20111012 31.9 3/RRUW-1
--------------------------------------------------------------------------------------------------------------------
====================================================================================================================
SMN APN PORT BOARD AuxPIU TX1(W/dBm) TX2(W/dBm) VSWR1 (RL1) VSWR2 (RL2) Sectors
====================================================================================================================
0 1 port_0_dev_5 RRUS01B1 1/RRUW-1 17.5 (42.4) 0 1.15 (23.3) 0 S1C1 S1C2
0 1 port_1_dev_6 RRUS01B1 2/RRUW-1 13.6 (41.3) 0 1.09 (26.9) 0 S2C1 S2C2
0 1 port_2_dev_7 RRUS01B1 3/RRUW-1 16.0 (42.0) 0 1.26 (18.9) 0 S3C1 S3C2
--------------------------------------------------------------------------------------------------------------------

[lewis]

With earlier versions of Moshell you can also use:RBS> lh asc dbg vswr 1 get -k to get the VSWR values.

[senjamir]

Hi,

Try this command
lh ru fui get vswr

Value less than 14.5 means that the VSWR is bad.

Br,
Sen