PDA

View Full Version : TEMS Investigation Option and AQM



cdmahn
2009-02-04, 10:09 PM
Hi,

Please someone here show me how to know about the option information in TEMS Investigation 8.0? How to know if the set-up TEMS in my computer supports AQM (Audio Quality Module) option?

In case supporting AQM, could you tell me the requirements to AQM (hardware and software)?

Thank you very much

andrew
2009-02-04, 11:12 PM
use tems hasp key reader & look for "pesq option".
you will need e******* propietary aqm module.

cdmahn
2009-02-05, 10:19 AM
use tems hasp key reader & look for "pesq option".
you will need e******* propietary aqm module.

Thank you.

My TEMS is support PESQ Option. However, could you give me more information on "E******* Propietary AQM module"?

andrew
2009-02-05, 09:09 PM
here:
http://www1.e*******.com/solutions/tems/realtime_diagnostics/ti_8.0/AQM_techpaper.pdf

19walid
2010-02-01, 07:55 PM
here:
http://www1.e*******.com/solutions/tems/realtime_diagnostics/ti_8.0/AQM_techpaper.pdf

E*******.com : need for login ?!
pleaz can you upload the file
thx

zleizero
2010-02-02, 01:23 AM
请问管理员能帮助我提高威望吗?

Piojo
2010-03-17, 11:57 AM
Hi,

Please someone here show me how to know about the option information in TEMS Investigation 8.0? How to know if the set-up TEMS in my computer supports AQM (Audio Quality Module) option?

In case supporting AQM, could you tell me the requirements to AQM (hardware and software)?

Thank you very much


hi cdmahn,

if you wanna know if you ms support aqm, you can check tems getting started (version 8) manual section 4.2, it says. "Audio quality measurements (AQM), including PESQ, are supported by all of the Sony E******* phones listed above as well as by the LG CU500 (supporting the WCDMA 1900 band).
For detailed information on UE inter-RAT capabilities (cell reselection, handover), please refer to the Release Note."


u can see the requirements at http://www.ascom.com/en/aqm.pdf

as you see, that requirements are related to hw and sw, and refers to ul and dl figures..

regards,


pd: someone knows to make aqm module? maybe its a easy schematic to build... only serial port + audio, to serial port in pc + audio port..., not usb, basic circuit..