PDA

View Full Version : Conect PC and mtm800 and use the PC for voice



alnaro
2012-04-25, 08:56 PM
Hi, everyone.
I know that it is possible control the MTM800 with the PC but I want connect the PC with MTM800 and I want pass the voice before for the computer and after to MTM800.
Thank's.

uy0101
2012-05-07, 10:28 PM
what about using the PC audio card and radio rear connector?
PC-audio-out to radio-mic-in
radio-spk-out to PC-audio-in
use PC-RS232 DTR/RTS pins to pilot a relay for PTT

Jen1
2012-06-08, 05:45 AM
Hi there,
I have been trialling TeTRA over IP in the past few months with ********/Sepura radio kit,with all radio's running class 1 clear firmware with great success.We have a small closed group of like minded licensed radio enthusiasts who wanted to progress and develop digital radio technology over IP ,primarily the TeTRA protocol.
We all used the Tigertronics Signalink USB sound card as the mobile radio interface linked to the PC,which comes with a 'customised' cable to suit whatever radio you choose to operate via the dedicated 'accessory' port on the rear of most mobile radios i.e.mtm series ect.
Regards.
Jen