PDA

View Full Version : DTM Feature in E******* system



shahram
2012-03-08, 04:57 PM
Hi,
We have recently activated DTM (Dual Transfer Mode) in our BSCs,but the total transfered data in DTM mode is very very low,
We have activated the feature in BSC and cell level,do you think we need to do any change in HLR MSC or MGW ,Is this bahaviour normal ? (total Transfered data volume in DTM mode is 10 MByte in BSC Peak hour for a BSC with 400 Cells)

Thanks

auto_art
2012-03-08, 07:15 PM
Hi,
We have recently activated DTM (Dual Transfer Mode) in our BSCs,but the total transfered data in DTM mode is very very low,
We have activated the feature in BSC and cell level,do you think we need to do any change in HLR MSC or MGW ,Is this bahaviour normal ? (total Transfered data volume in DTM mode is 10 MByte in BSC Peak hour for a BSC with 400 Cells)

Thanks

this is normal because very few terminal supports class C operation(voice+data). also u may tested during DTM mode very few bytes are exchanged.

electron
2012-03-08, 11:18 PM
this is normal because very few terminal supports class C operation(voice+data). also u may tested during DTM mode very few bytes are exchanged.

I think you mean Class A not Class C.

Thanks

auto_art
2012-03-09, 12:50 AM
may be i frgt..i wnted to say which suports both cs ps along.