PDA

View Full Version : Call setup rejection problem due to "MESSAGE NOT COMPATIBLE WITH THE PROTOCOL STATE"



fahmi
2012-02-28, 01:25 AM
Hi experts,
Last days we face a problem when trying to setup a call for both 2G and 3G (vendor Huawei).
As it is clear in figures below, the Reject cause value is (101) MESSAGE NOT COMPATIBLE WITH THE PROTOCOL STATE.
Any explanation please !!
25025

25026

fahmi
2012-02-28, 06:34 PM
Hi experts,
Come on we need to progress here !! any comment plz !!

kentck86
2012-03-05, 09:25 PM
Hi Mate,

Please find the similar case discussion here
http://www.finetopix.com/showthread.php?27146-CM-Service-Reject-message-not-compatible-with-the-protocol-state&highlight=not+compatible+with+protocol+state

M (http://www.finetopix.com/showthread.php?27146-CM-Service-Reject-message-not-compatible-with-the-protocol-state&highlight=not+compatible+with+protocol+state)oreoever, it is better if you could attach DT Trace Log and IMSI trace log in order to pinpoint the issue.

thank you

Muhammad Imran Rafique
2012-03-06, 08:03 PM
It should go to CORE team, and traces can exactly point out, if it is due to any particular UE or IMSI.

BR//
Imran