PDA

View Full Version : E/// 2G to 3G Cell reselection Problem on border



icebreaker05
2012-01-28, 12:22 AM
Hi Experts,

I have a problem on the 2G to 3G cell reselection on the country border areas. I have tried to compare all the parameters for reselection to other cells and other BSC but I found no inconsistency. The problem is intemittent in nature as we can get cell reselection sometimes. So I guess the cell parameters are ok. When I checked on TEMS DT, I found that there are so many attempts to reselect but none of them is not going all the way through to 3G.

What seems to be the problem, and how can I solve the issue.


Hoping for your expert advices.

dekili
2012-01-28, 08:48 AM
Have you analyzed scanner and coverage in the area? Since it is country border, you might be suffering from the network from the neighboring country. These fluctuations look like there is a problem with the coverage from the other country that is leaking into your area. If this is the case, est solution is to write to the national regulator to complain to the neighboring national agency since such cases are solved by CEPT recommendations.
Cheers

plannerguy
2012-01-28, 02:43 PM
HI

Check the MSC logs and some times the LAC of UMTS may kept as forbiden for your PLMN

Regards
Plannerguy

wnsworld
2012-01-28, 06:38 PM
you can check also in 2G cell..

BSC PROPERTY COEXUMTS: 1
QSC: 15
QSCI: 0
QSI: 7
FDDMRR: 0
FDDQMIN: 7
FDDQOFF: 0
SPRIO: NO
FDDQMINOFF: 0
FDDRSCPMIN: 4
ISHOLEV: 0
Diversity: NODIV
MRSL: 49
SC: To be defined only in IDLE BA List

BR//
WNS..

ltecity
2012-01-28, 08:27 PM
For faster cell reselection you can create neighbor definition 2G to 3G.

icebreaker05
2012-01-30, 04:54 PM
Hi Plannerguy,

Actually we are having reselection from 3G to 2G but it is taking at least 10-20mins. Will there be still possibilty that LAC is forbidden?

BR,

icebreaker05
2012-01-30, 04:56 PM
Hi,

Neighbors and UMFI are defined properly,..Is there a timer in the BSC that triggers 2G to 3G reselection(idle mode).

BR,

icebreaker05
2012-01-30, 05:21 PM
you can check also in 2G cell..

BSC PROPERTY COEXUMTS: 1
QSC: 15
QSCI: 0
QSI: 7
FDDMRR: 0
FDDQMIN: 7
FDDQOFF: 0
SPRIO: NO
FDDQMINOFF: 0
FDDRSCPMIN: 4
ISHOLEV: 0
Diversity: NODIV
MRSL: 49
SC: To be defined only in IDLE BA List

BR//
WNS..


Hi WNS,

I have checked all of this parameter, the only difference is I set SPRIO=YES, FDDQMIN=5, FDDRSCPMIN=6. And all BA UMFI are defined correctly in IDLE. When I tried to check the TEMS logfiles, there is a cell reselection procedure(a lot of times) but it is not going through 3G successfully. What do you think should I check next.
I have attached the screenshot for this.

BR,

icebreaker05
2012-01-31, 03:04 PM
Hi WNS,

I have checked all of this parameter, the only difference is I set SPRIO=YES, FDDQMIN=5, FDDRSCPMIN=6. And all BA UMFI are defined correctly in IDLE. When I tried to check the TEMS logfiles, there is a cell reselection procedure(a lot of times) but it is not going through 3G successfully. What do you think should I check next.
I have attached the screenshot for this.

BR,



Guys any news????

scorpion
2012-02-04, 12:34 AM
It will me 32 GSM AND/OR 32 3G Neighbors in E/// & NSN

Rf_optimizer
2012-02-18, 08:19 PM
Hello Kalpesh,
For faster return to 3G your node should have feature called Fast return to 3G available in E******* higher version

regards
Optimizer

Rf_optimizer
2012-02-18, 08:21 PM
Hello,
Aside from various cell re selection feature your node should support fast return to 3G feature to be activated for quick return

Regards

Interface
2012-02-20, 01:44 AM
Please check this problems with other SIM or Mobile. If this problem is same, please check the parameter of Location Update on 2G MSC.

fannakhosr
2012-02-20, 09:51 PM
did you check RRC load and location area update in 3G, through the context it seems that you are sure from 2G prameters settings,