PDA

View Full Version : Help me flash K810i!!!



liukang
2012-01-17, 11:58 AM
Dear all member!
I use setool LITE with SETool Box 3:
- 1. Select USB Interface: When i press Read GDFS( backup GDFS), appear announcement Hold "C" and insert USB Cable then i hold C button and insert USB cable (of setool box 3) seem Setool Lite can not connect to phone.
- 2. Select COM port: press Read GDFS and i receive message: Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:167 secs.
Will backup GDFS now.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101389222 CERT:N/A
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:2 secs.


So anyone have solution for me to flash K810i.

Thanks and BR!

always4u
2012-01-17, 11:41 PM
Hi,

As Your Phone CId is 53 and setool lite cannot flash k810 with cid 53 you can flash it will setool3 .

br//always4u


Dear all member!
I use setool LITE with SETool Box 3:
- 1. Select USB Interface: When i press Read GDFS( backup GDFS), appear announcement Hold "C" and insert USB Cable then i hold C button and insert USB cable (of setool box 3) seem Setool Lite can not connect to phone.
- 2. Select COM port: press Read GDFS and i receive message: Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:167 secs.
Will backup GDFS now.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101389222 CERT:N/A
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:2 secs.


So anyone have solution for me to flash K810i.

Thanks and BR!

capcipcup
2012-08-05, 10:43 PM
you can use far manager + jdflasher then write script with phonexs 4.1

husseinmanaf
2012-08-06, 12:33 AM
if you have Setoolbox it will success

try to get it


BR
Dear all member!
I use setool LITE with SETool Box 3:
- 1. Select USB Interface: When i press Read GDFS( backup GDFS), appear announcement Hold "C" and insert USB Cable then i hold C button and insert USB cable (of setool box 3) seem Setool Lite can not connect to phone.
- 2. Select COM port: press Read GDFS and i receive message: Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net (http://www.setool.net) and buy FULL.

Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:167 secs.
Will backup GDFS now.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101389222 CERT:N/A
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:2 secs.


So anyone have solution for me to flash K810i.

Thanks and BR!

isha
2012-08-14, 03:49 PM
for gdfs backup use xs++