liukang
2012-01-17, 11:58 AM
Dear all member!
I use setool LITE with SETool Box 3:
- 1. Select USB Interface: When i press Read GDFS( backup GDFS), appear announcement Hold "C" and insert USB Cable then i hold C button and insert USB cable (of setool box 3) seem Setool Lite can not connect to phone.
- 2. Select COM port: press Read GDFS and i receive message: Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:167 secs.
Will backup GDFS now.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101389222 CERT:N/A
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:2 secs.
So anyone have solution for me to flash K810i.
Thanks and BR!
I use setool LITE with SETool Box 3:
- 1. Select USB Interface: When i press Read GDFS( backup GDFS), appear announcement Hold "C" and insert USB Cable then i hold C button and insert USB cable (of setool box 3) seem Setool Lite can not connect to phone.
- 2. Select COM port: press Read GDFS and i receive message: Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors
if you like LITE edition - please visit www.setool.net and buy FULL.
Will backup GDFS now.
Abort all operations.
phone pre-boot failed,possible RECOVERY needed.
Elapsed:167 secs.
Will backup GDFS now.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35945101389222 CERT:N/A
FLASH CID:53 COLOR:RED
Can't build loaders chain ;(
Elapsed:2 secs.
So anyone have solution for me to flash K810i.
Thanks and BR!