PDA

View Full Version : Can we control the distance where a Subscriber can camp in a cell UMTS - E******* W10



RFDude_PMA
2012-01-17, 05:43 AM
Hi Gurus

I have a question regarding how to control the access to a cell of distance users.. denied the access to a cell.

Thanks for the assistance.

jayk
2012-01-17, 06:03 AM
"Cell Radius" parameter can be used to set the distance to provide coverage.

Rafatiger
2012-01-18, 01:50 AM
RFDude,

Other way of doing that is increasing the RSCP or the EcNo threshold value, considering that the subscribers closer to the cell border have weaker signal strenght and higher noise. Of course, its impact is dependand on your topology and clutter in which the cell is located. Be aware that you might have some shifts on the cell traffic and other KPI's as well.

Piscean21
2012-01-18, 02:36 AM
You can play with
RXLev Acces Min
RACH min access level
MAx TA etc.




Hi Gurus

I have a question regarding how to control the access to a cell of distance users.. denied the access to a cell.

Thanks for the assistance.

RFDude_PMA
2012-01-20, 02:49 AM
hi jayk

Where can I get the parameter cell radius? at rbslocal is cellrange but that will trigger a lic alarm if I change this value below the parameter license.

Thanks

jayk
2012-01-21, 06:18 AM
CellRadius is in Huawei and CellRange in Ericcson. There should not be any Alarm Triggering to change parameter value.