PDA

View Full Version : ******** Tetra MTP700 firmware Clear 3.1.6



Motorola
2012-01-16, 05:59 PM
Attached is Firmware for old ******** Tetra handheld radio MTP700


Hope it can help to people who own old radio :-)


regards

hgarin
2012-05-26, 06:45 PM
hello, would you please send me the file, since I can not download hgarin@hotmail.com q thank you very much

-bup-
2012-05-28, 07:42 PM
Hi,

I found a little more recent release: R03.000.3375 MTP700 (MR3.6.1E)

dies33
2012-09-19, 06:30 AM
Hey. Is there any version of firmware for MTP700 which allows you to work with the DMO repeater

cammedia
2012-10-07, 06:50 PM
Please could you send the latest version to me? I can't download...
hans-heesbeen$hotmail .com change $ to @ and remove space please.

AnRegs
2012-11-19, 12:15 AM
Guys,

I need R03.000.3375 MTP700 MR3.6.1E.rar‎ (http://www.finetopix.com/attachment.php?attachmentid=27629&d=1338201704) file. Please email to: wireless.friendly # gmail.com

jandri0309
2013-02-25, 04:22 AM
Hi. Can some one email me the MTP-700 programming software?

regards.

allstar44
2013-02-25, 05:11 AM
I´m also looking for MTP-700 programming software. I´d appreciate it if someone could email it to me.
Best regards

jandri0309
2013-02-25, 05:11 AM
my email is andri_rescue hotmail.com

-bup-
2013-02-25, 09:25 AM
Hi,

Here is CPS R70.44.09 MR2.0 FVN5051E from May.30.2002 (MTH500-MTP700-MTM700)

Please, contribute to forum too !

-bup-
2013-02-25, 09:30 AM
last files...
:D

chipetto
2013-04-07, 05:08 PM
thanks for th software

reagards form holland

kikina
2014-01-20, 09:51 PM
Please could you send the sotware CPS R70.44.09 MR2.0 FVN5051E to me? I can't download... email: pcermy1@seznam.cz Thanks.

welshychris
2014-02-09, 06:52 PM
Hi, I'm just wondering will the R70.44.09 MR2.0 FVN5051E (http://www.finetopix.com/attachment.php?attachmentid=31783&d=1361752143) firmware upgrade the MTM700 and if it will enable repeater mode, I've seen around the internet people mentioning that it does?

ludek-brno
2014-02-19, 04:30 AM
Hello,I Have MTP700 fw 03.000.3357;CPver 80.44.09 I need soft version for preproggrammed my private radios. Soft version TETRACPS FVN5051E R1.2 R70.44.09 not supported Codeplug.Please,Version is available for this type ? ludek from Brno-CZ e-mail: ludek-brno@volny.cz .Thank You for infos.

ludek-brno
2014-03-04, 02:21 AM
Hello,send my please this attachment files(R03.000.3375 MTP700 MR3.6.1E.rar) to mail ludek-brno@volny.cz Thank You. Ludek

sjakie
2014-03-26, 02:30 AM
hello, would you please send me the file, since I can not download j_schuurman@onnet.nl

sjakie
2014-03-26, 02:33 AM
hello, would you please send me the file, since I can not download j_schuurman@zonnet.nl

Ruut
2014-10-04, 11:35 PM
Hi there,

Is it possible you send me a copy since I do not have privileges to download it directly yet.
Will have my first mtp this evening and very interested in reading and modifying the codeplug.

Many thanks!
Ruut

Ruut
2014-10-05, 12:32 AM
Hello Bup,

Is it possible that you send me a version to program my mtp700?
You can reach me @ ruutbol at hotmail dot com...

Many thanks,
Ruut

zhilamian
2014-10-19, 07:26 PM
hi,there
could you please send this cpsR70.44.09 MR2.0 FVN5051E to me ?
i can't download ,thanks a lot
email:zhilamian@sina.com

zhilamian
2014-10-19, 07:29 PM
hi,
could you sand the cps(MR3.1.6E) to me? i have looking for this for a loooooooooooong time.thank a lot. I can't download this attachment.
email:zhilamian@sina.com

jandri0309
2014-10-20, 02:38 AM
Hi, I will email you the file.

Regards.

Jack1949
2014-10-30, 01:41 AM
Hi, I can't download this. Can you send the software? jack-trees@hotmail.com
thanks Jack

rcs96
2014-12-19, 10:45 AM
Halo, I can't download this software, Will jou send the Sofware to me?
Me E-mail: rcs96@ziggo.nl

Thanks Rudy

iliketetra
2015-02-21, 12:01 PM
HI all, I know that this is another Gimme, but I would really like to have the CPS R70.44.09 MR2.0 FVN5051E files emailed to me as I cannot download them. ev351@hotmail.com

Thanks a lot.

kondoros
2015-03-19, 06:49 AM
R03.000.3375 MTP700 (http://www.finetopix.com/attachment.php?attachmentid=27629&d=1338201704) file is corrupted and almost bricked my MTP700

Alwin-R09
2015-05-20, 11:56 PM
Hello,

Its a huge topic kick, but is there someone who could mail me the programming software addressed in this topic? I'm a new member and don't have the authorisation to download yet! My email is redstarf1@hotmail.com!

A very big thanks for the one who can help me!

Greetings,

Alwin from The Netherlands

wygiwia
2015-06-24, 04:04 AM
I would really much appreciate the software as well, since I'm also not able to download yet.
********(at)mijndata.nl

nintrew
2015-06-24, 04:16 AM
both of you got mail

raska_69
2016-02-06, 07:23 AM
Hi.
Someone is kind enough to send for my r03.000.3375 my email address?
raska_69@hotmail.com
Thanks in advance!

580-Gabor
2016-02-07, 02:43 AM
Please see your e-mail !

yo3gts
2016-06-28, 09:45 PM
Anyone has information about RIB for MTP700?

-bup-
2016-06-28, 11:48 PM
Hi,

'Official' programming requiers FLN9636 cable and PMLN4510 programming stand as describe here:


You can also build 'home-made' RIB using max232 and using radio pin1 for ground, pin2 for Data in and pin3 for Data out.

dyna
2016-11-01, 03:38 PM
A homemade programming cable for MTP700 is easier then thought, just use a cheap TTL converter with the ability to change voltage.
Important is to set it to 3.3V, and connect to pin1 (ground), 2 (TX), and 3 (RX).
Cost me only 1,50 EU....

Booghi
2017-06-24, 07:25 PM
Please anyone can send me a clear firmware by email for a MTP700? I'm new in forum and i can't download. I erased the sorftware from radio and now i'm in a big shit. I think that R03.000.3375 will work. My email is : bori@yahoo.com. Thank you in advance.

580-Gabor
2017-06-28, 06:48 PM
Im uploaded the R030003357.z19 file to Mega.nz.
Download here:
https://mega.nz/#!4UsX0ZSL!QFM3GYdhqMWuM3NC6mZUinAN6LrRckXrsmkU0l75tBs

shahnavazi
2017-07-02, 08:51 AM
Hey. Is there any version of firmware for MTP700 which allows you to work with the DMO repeater

580-Gabor
2017-07-02, 05:08 PM
There even is such a thing, but i don't have it.

40650

AnRegs
2017-07-03, 01:56 AM
Hey. Is there any version of firmware for MTP700 which allows you to work with the DMO repeater
Yes, it's existing.

RA1AIE
2017-07-05, 07:42 AM
Yes, it's existing.
...and you need to have Depot for MTP700 to do this trick :)

580-Gabor
2017-07-05, 05:28 PM
Maybe the Depot CPS MR 5.11 (R 6D.581.03) PMVN4196A ?

AnRegs
2017-07-06, 04:57 AM
...and you need to have Depot for MTP700 to do this trick :)
I can't recall details, but I have been done it a few years ago. And DMO repeater is part of radio menu now.

-bup-
2017-07-06, 05:33 AM
"Maybe the Depot CPS MR 5.11 (R 6D.581.03) PMVN4196A ?"

MR5.11 is not compatible with MR3.1.6

580-Gabor
2017-07-06, 05:22 PM
Now i'm find it: R7A.398.01 LAB (it is compatible with MR3.1.6).
https://mega.nz/#!8I93CKrS!sMQESzFibU4dVT71khvDIk9dM7KX7md1FZsjo9RM7K8
I just need a transceiver.

RA1AIE
2017-07-06, 08:20 PM
It's good, but MR3.1.6 firmware doesn't contains DMO Repeater code :)

AnRegs
2017-07-06, 10:11 PM
I can suppose that DMO Repeater is it R03.000.3375 - MR3.6.1E release.

580-Gabor
2017-07-07, 02:00 AM
Hi there,

it is on the ex hackersrussia FTP-site:


1.823 KB
R03.000.3375 MTP700 MR3.6.1E.rar
19.11.2012




I dont have it anymore :-( It was on my old HDD

explorers
2017-12-12, 08:58 AM
Please see your e-mail !