PDA

View Full Version : Samsung galaxy Field test code



plannerguy
2011-11-19, 09:00 PM
Hi

For all Samsung Galaxy users , the below code will help to getinto service mode .same can be used to Trouble shoot aswellas do field test.

procedure

type code : *#0011#

it wil take u to service mode, will show general datas like
CELLID,LAC,RAC,RSCP,RSSI,FREQ,MODE:GSM\WCDMA.

After same press the menu key : in the same tap back
which will guide u to 7 options

BASIC INFORMATION, MM,RR,NEIGHBORCELL,GPRS,HANDOVER..ETC

Will help to get layer3 states MM/RR as wellas the HO procdures.


Regards
Plannerguy

wolverine
2011-11-19, 09:39 PM
Is there any way to enable the Qualcomm diagnostic port through this menu?

plannerguy
2011-11-19, 09:41 PM
Hi

will check and revert u

Regards
Plannerguy

essalvador
2011-11-20, 05:30 AM
Try also : *#*#197328640#*#*, u can active diag by Common/Diag config.

U can also lock on cell or psc or bcch ... by navigating on /Common/WCDMA-GSM SET Channel/Cell Locking/Cell Locking

BR

yhussain110
2011-11-20, 06:21 AM
Hi Everyone,

Click the following link of mine to see other detail menus for Samasung Galaxy.

http://www.finetopix.com/showthread.php?24217-Samsung-Galaxy-S-%28Eng-Mode-other-hidden-menu%29&highlight=samsung

If you like it please give rep...

installer
2012-03-18, 06:55 AM
Hi, all
Can anyone teach me how to lock/unlock to a particular scrambling code/ARFCN using net monitor?
I have Galaxy S+ (I-9001) and i want to use it to test frequency channel on BTS.

I work for mobile operator, and this is necessary for me.

Thx for the tips