PDA

View Full Version : Question Some Huawei Counters Optimization Procedure



fatim
2011-10-07, 05:56 PM
Hi all,
I have some problems with Optimization of some Huawei Counters which don't frequently impact the RRC Success Rate in most networks. It means that they haven't always high values when RRC Success Rate is down.
Here are the definitions of these counters:
- VS.RRC.Rej.Code.Cong: Count of RRC Connection Reject because of Congestion<Congestion because of CODE><Cell>
- VS.RRC.Rej.Power.Cong: Count of RRC Connection Reject because of Congestion<Congestion because of POWER><Cell>
If you have some suggestions about procedures when these counters have high values plizzzz!!!!!

junoohussain
2012-01-22, 12:00 AM
check the HO zones for Code congestion, for power check which algo u are using

agenov
2012-03-11, 09:43 PM
if you did search in the forum you were found the answers. So many topics regarding congestion and how to cope with it.


BR
Alex


Hi all,
I have some problems with Optimization of some Huawei Counters which don't frequently impact the RRC Success Rate in most networks. It means that they haven't always high values when RRC Success Rate is down.
Here are the definitions of these counters:
- VS.RRC.Rej.Code.Cong: Count of RRC Connection Reject because of Congestion<Congestion because of CODE><Cell>
- VS.RRC.Rej.Power.Cong: Count of RRC Connection Reject because of Congestion<Congestion because of POWER><Cell>
If you have some suggestions about procedures when these counters have high values plizzzz!!!!!