Help me for the HASP HL Emulator!

[fmstereo]

After read the post "HASP HL Max emulation guide, step by step (http://www.finetopix.com/showthread.php?t=2209)" by David.

I try to emulate the TEMS 8.0.3 dongle. step by step, but failed at last.

at the last step, I start the emulator, and read the dongle, it says: "error 1031: 外壳加密未知错误" or "Error 7:未找到HASP HL 加密锁".

I don't know what's wrong with it!

the version of my dongle is :HASP HL 3.21.

I need help. thank you all!

by the way, the version of my dongle is :HASP HL 3.21.

[fmstereo]

在读了david的"HASP HL Max emulation guide, step by step (http://www.finetopix.com/showthread.php?t=2209) "文章之后，我也试图emulate TEMS 8.0.3的狗。

使用david发的程序，前面都很顺畅，可是在最后一步：安装或重新启动emulator后，hasp usb硬件也找到了，打开读狗程序，
有时候提示： "error 1031: 外壳加密未知错误" ，（使用david的4 in 1 emulation pack里的3 Hasp USB Key Emulator）
有时候提示："Error 7:未找到HASP HL 加密锁".（使用的hasp HL usb emulator，来源不详，好像也是david提供的）

哪位大侠知道在哪里出错了呢？请指点一下，谢谢。

狗版本是：HASP HL 3.21。

[gsmmangi]

Dear friend,

Could you kindly translate below into english for some forum who can't read it to understand


Thanks






在读了david的"HASP HL Max emulation guide, step by step (http://www.finetopix.com/showthread.php?t=2209) "文章之后，我也试图emulate TEMS 8.0.3的狗。

使用david发的程序，前面都很顺畅，可是在最后一步：安装或重新启动********后，hasp usb硬件也找到了，打开读狗程序，
有时候提示： "error 1031: 外壳加密未知错误" ，（使用david的4 in 1 emulation pack里的3 Hasp USB Key ********）
有时候提示："Error 7:未找到HASP HL 加密锁".（使用的hasp HL usb ********，来源不详，好像也是david提供的）

哪位大侠知道在哪里出错了呢？请指点一下，谢谢。

狗版本是：HASP HL 3.21。

[chachajarv]

Could you transfer into english?

[nosferatu007]

Could u translate it to english. Last time, I followed his method and it's work! but just collector not for RA. Could you give me yr reg file? I will try it.

[cococrunch]

Is it chinese, i dont even have the language pack yet..

[samon_1978]

where is the dongle for Tems 8.0 , I can't find it at all

[grid666]

Dear friend,

Could you kindly translate below into english for some forum who can't read it to understand


Thanks

Dear friend

There is no point in translating, he is merely repeating your words complaining he has followed David's instructions and got various error messages each time he tried to read dongle.

So he is asking if here on forum exist some Guru who can teach him how to do that right or tell him what he is doing wrong

best regards

[nosferatu007]

So mean you even can't gen .dmp file. When it stop? at h5dmp process?

[cuixiaobin]

So mean you even can't gen .dmp file. When it stop? at h5dmp process?

First, you may use some software such as hasp toro monitor to get the password of the dongle(it is neccessary for h5dmp to backup the memory of the dongle).

Then you can use h5dmp.exe to get the .dmp file of the dongle.

At last, you can convet the .dmp file to .reg file for emulation software(such as vusb emulation)

[davidbrayan]

@fmstereo
can you upload your files
1. hasp.dmp
2. hhl_mem.dmp
3. registry file created by you from these files.

BR
db

[cuixiaobin]

Here is the file I have got.

[clive]

Hi
I have a HASP HL 3.21. I tried options listed here but no luck.
1. If I enable HASP HL emu & run teh sw. I get error - S/W Keylock error.
2. If I use Toro Monitor, the prog doesn;t start.
3. If I try a **** using h4dmp or h5dmp or sparow, I get - no NOMAD found.
4. If I use HASpEmu to cathc the dongle pwd, the prog doesn;t start but I get s/w Keylock error

So pl advise a way to **** the dongle befor its time expires :)

[cuixiaobin]

Then you may **** the dongle by h5dmp.exe

[viethuan]

good! I needing HASP HL

[telwind]

Hi
I have a HASP HL 3.21. I tried options listed here but no luck.
1. If I enable HASP HL emu & run teh sw. I get error - S/W Keylock error.
2. If I use Toro Monitor, the prog doesn;t start.
3. If I try a **** using h4dmp or h5dmp or sparow, I get - no NOMAD found.
4. If I use HASpEmu to cathc the dongle pwd, the prog doesn;t start but I get s/w Keylock error

So pl advise a way to **** the dongle befor its time expires :)

Hi,

Use HASP log (Xyrus& Sataron) to get PWs. You can download it here http://dongla.net/storage/dongles/hasploger.zip

Then use h5dmp to ****.

[besoeso]

In this case, for you can to emul the hasp hl you will need anything more that the logs and the e+m+u+l+a+t+o+r.:rolleyes: