PDA

View Full Version : SIRENET



besoeso
2008-12-27, 04:23 AM
SIRENET


Description:

SIRENET is a radio spectrum management tool set aside for radio networks planning and the electromagnetic compatibility analysis.
The tool is based on the simulation of real surroundings supported by an advanced GIS (Geographic Information System), the exact reproduction of the radio equipment behaviour and the most advanced algorithms for the propagation prediction in different surroundings. The application presents a friendly interface on a Windows platform. The handling is easy and intuitive and its functionality adapts to the necessities of different user’s profiles. It allows working in local, with a PC equipped with the Windows operating system, and in multi-users environments within a local area network.
SIRENET, in a handy way, allows to:
Make the theoretical planning of the network
Calibrate the simulations with field measurements
Analyze the cost of each configuration
Present the request of frequencies form
Supervise the network quality
Manage the technical inventory
Facilitate the call centre service

The program is ideal to supervise the networks already in service as well as planning those that are going to be deployed in the future. Its algorithms cover all the bands and radio communication services, including new digital systems such as DAB, DVB, TETRA, DECT, Point-Multipoint, ERMES, GSM, DCS, UMTS, etc.


Info link:


http://www.inteliaconsultores.com/english/_productos/productos.html


Besoeso.

EngSoft
2008-12-27, 11:21 PM
:):) Good JoB :):)

DCA
2008-12-27, 11:30 PM
Maybe there's something wrong with your registry setting

[HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\ru-board\gamebit0\Dump\2FFB3FA8]

(sh/c)ould be

[HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\ru-board\mulator\Dump\2FFB3FA8]

or if you are planning to use multi version

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\2FFB3FA8]

besoeso
2008-12-28, 06:24 AM
Maybe there's something wrong with your registry setting

[HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\ru-board\gamebit0\Dump\2FFB3FA8]

(sh/c)ould be

[HKEY_LOCAL_MACHINE\system\CurrentControlSet\services\ru-board\mulator\Dump\2FFB3FA8]

or if you are planning to use multi version

[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\2FFB3FA8]


I've tried the change that you propose and does not work.:(

¿Does your've tested this?

A greeting.


Besoeso.

davidbrayan
2008-12-28, 12:03 PM
how much memory that dongle has,
normally its 4k and your looks so less.
check with your dongle memory and revert.
the size of hhl_mem.dmp is 128 bytes in your case,should be around 4048 bytes

BR
db

xagoras
2009-01-28, 12:06 AM
Hello,

How can i get SIRENET?

I can´t download some files.

Sorry about my english, im from spain.

Thanks.

f1cy
2009-01-28, 02:20 AM
besoeso you can do it

1. Open /Toro Monitor/Toro Aladdin Dongles Monitor.exe
2. Connect your dongle and open your protected program.
3. View the Toro Monitor and look through the information that is being populated. In that information you should find your MODAD. (example: 1954 (0x7A2) ) Write this information on a piece of paper and close the Monitor.
4. Open up a command prompt (cmd.exe) and navigate to C:\......\Hl-****\type the following: HL-****.EXE /**** "your modad here"Example:HL-****.EXE /**** 0x7A2The process of ****ing your dongle should begin at this point.
5. After successfully ****ing your dongle, you should end up with a .dat and .reg file. (example: 07A2.reg and 07A2.dat)Close the command prompt and add the .reg file to your registry.
6. Create a folder under C:\ c:\trial_solver_directory_demo_version_only\After creating the above directory, copy your .dat file into it. (We just created the .dat with HL-****)
7. From Toro Monitor.After entering this information press "Find seeds". If it gives you an error, check your folder name and MODAD entry.
8. Navigate to and open up /MyLock/mylock_builder.exeIn your path, select the .dat file you created with HL-****.Enter the seeds you wrote down and click "Build mylock.fst"Close the program and find mylock.fst (Should be in the same directory as your .dat file)Copy mylock.fst to c:\Windows\system32\drivers
9. Navigate to and open up /HL_emul/install.bat------------------------------------
@echo offnet
stop hardlockcopy %SystemRoot%\system32\drivers\hardlock.sys %SystemRoot%\system32\drivers\hardlock.bakdel /Q %SystemRoot%\system32\drivers\hardlock.syscopy HARDLOCK.SYS %SystemRoot%\system32\drivers\net start hardlockEcho -Echo - ******** was installedEcho -pause-------------------------------------
If there is an error after executing install.bat, just follow the commands listed above manually until you're successful.Restart your computer.

as usually use VusbBus ********..

anwar
2009-01-29, 12:33 AM
Anyone can share dmp file?:)


besoeso you can do it

1. Open /Toro Monitor/Toro Aladdin Dongles Monitor.exe
2. Connect your dongle and open your protected program.
3. View the Toro Monitor and look through the information that is being populated. In that information you should find your MODAD. (example: 1954 (0x7A2) ) Write this information on a piece of paper and close the Monitor.
4. Open up a command prompt (cmd.exe) and navigate to C:\......\Hl-****\type the following: HL-****.EXE /**** "your modad here"Example:HL-****.EXE /**** 0x7A2The process of ****ing your dongle should begin at this point.
5. After successfully ****ing your dongle, you should end up with a .dat and .reg file. (example: 07A2.reg and 07A2.dat)Close the command prompt and add the .reg file to your registry.
6. Create a folder under C:\ c:\trial_solver_directory_demo_version_only\After creating the above directory, copy your .dat file into it. (We just created the .dat with HL-****)
7. From Toro Monitor.After entering this information press "Find seeds". If it gives you an error, check your folder name and MODAD entry.
8. Navigate to and open up /MyLock/mylock_builder.exeIn your path, select the .dat file you created with HL-****.Enter the seeds you wrote down and click "Build mylock.fst"Close the program and find mylock.fst (Should be in the same directory as your .dat file)Copy mylock.fst to c:\Windows\system32\drivers
9. Navigate to and open up /HL_emul/install.bat------------------------------------
@echo offnet
stop hardlockcopy %SystemRoot%\system32\drivers\hardlock.sys %SystemRoot%\system32\drivers\hardlock.bakdel /Q %SystemRoot%\system32\drivers\hardlock.syscopy HARDLOCK.SYS %SystemRoot%\system32\drivers\net start hardlockEcho -Echo - ******** was installedEcho -pause-------------------------------------
If there is an error after executing install.bat, just follow the commands listed above manually until you're successful.Restart your computer.

as usually use VusbBus ********..

besoeso
2009-01-29, 01:09 AM
Anyone can share dmp file?:)

This is the link:

http://www.finetopix.com/attachment.php?attachmentid=2021&d=1230317830


A greeting.


Besoeso.

besoeso
2009-01-29, 01:12 AM
besoeso you can do it

1. Open /Toro Monitor/Toro Aladdin Dongles Monitor.exe
2. Connect your dongle and open your protected program.
3. View the Toro Monitor and look through the information that is being populated. In that information you should find your MODAD. (example: 1954 (0x7A2) ) Write this information on a piece of paper and close the Monitor.
4. Open up a command prompt (cmd.exe) and navigate to C:\......\Hl-****\type the following: HL-****.EXE /**** "your modad here"Example:HL-****.EXE /**** 0x7A2The process of ****ing your dongle should begin at this point.
5. After successfully ****ing your dongle, you should end up with a .dat and .reg file. (example: 07A2.reg and 07A2.dat)Close the command prompt and add the .reg file to your registry.
6. Create a folder under C:\ c:\trial_solver_directory_demo_version_only\After creating the above directory, copy your .dat file into it. (We just created the .dat with HL-****)
7. From Toro Monitor.After entering this information press "Find seeds". If it gives you an error, check your folder name and MODAD entry.
8. Navigate to and open up /MyLock/mylock_builder.exeIn your path, select the .dat file you created with HL-****.Enter the seeds you wrote down and click "Build mylock.fst"Close the program and find mylock.fst (Should be in the same directory as your .dat file)Copy mylock.fst to c:\Windows\system32\drivers
9. Navigate to and open up /HL_emul/install.bat------------------------------------
@echo offnet
stop hardlockcopy %SystemRoot%\system32\drivers\hardlock.sys %SystemRoot%\system32\drivers\hardlock.bakdel /Q %SystemRoot%\system32\drivers\hardlock.syscopy HARDLOCK.SYS %SystemRoot%\system32\drivers\net start hardlockEcho -Echo - ******** was installedEcho -pause-------------------------------------
If there is an error after executing install.bat, just follow the commands listed above manually until you're successful.Restart your computer.

as usually use VusbBus ********..

This steps are for hardlock emulation . :rolleyes:

A greeting.

Besoeso.

kilmister
2009-02-21, 11:41 PM
Did anyone get it to work ? fully without demo mode ?

kaka.enine
2009-02-22, 09:47 AM
the SW protected by hardlock or hasp-HL :confused: :confused: :confused: ???

BR,

-kaka-

marceloenrique
2009-06-11, 11:20 AM
puedes dejar los link en 4share o rapidshare gracias de antemano
________
Live Sex (http://livesexwebshows.com/)

jskhalid
2010-06-23, 05:01 AM
Hi , thx to besoeso & f1cy , but i have one further question , @f1cy , which directory you are talking for ??

BR

marceloenrique
2010-06-23, 07:59 AM
Hola besoeso

Queria saber si la m-e-d-i-c-i-n-a funciona o si tienes una buena a mi no me funciono

Saludos

marceloenrique

besoeso
2010-06-24, 03:12 AM
Por lo visto ha salido la version 3.5,

Si alguien tiene, por favor compartir.


Hola besoeso

Queria saber si la m-e-d-i-c-i-n-a funciona o si tienes una buena a mi no me funciono

Saludos

marceloenrique