PDA

View Full Version : TEMS Activation K800i GDFS



davidbrayan
2008-12-01, 10:10 PM
This is GDFS from TEMS Activated K800i phone,
Use it the way we use on K790,
Not sure about Calibration data,
Backup your GDFS first before doing anything to your phone.


BR
db

gsmart
2008-12-01, 11:28 PM
2 Questions:

1. Is the activation script has Full lisence for K800i Inv.+Pocket+GPS?

2. If I re write the backed uo original GDFS, Is the phone come bac to normal mode(without any activation)?

Thanks

anita_2k
2008-12-01, 11:54 PM
2 Questions:

1. Is the activation script has Full lisence for K800i Inv.+Pocket+GPS?

2. If I re write the backed uo original GDFS, Is the phone come bac to normal mode(without any activation)?

Thanks

Ans:

1. If the activation script is from the_laser (or any reseller), of course, it is full license including Pocket and GPS .

2. Yes, if you re-write your backed-up GDFS (original gdfs), the phone will be back to its normal condition (calibrated again of course). No need to write script if you just want to recover a backed-up gdfs.

@Davidbrayan:

Do you think in your procedures (discussed on other thread) alone can make a fully working Tems Phone (+ Pocket & GPS)? I follow all the instructions you mentioned, but failed to make one. Instead, when I'm done with your last step (no choice) I just write the script (incomplete) spread by the_laser at GSM forum to just make a Pocket (w/ 2 db discrepancy) ;0.

br/Anne

Momay
2008-12-02, 11:53 AM
This GDFS not full license (TEMS+POCKET) no GPS function.

jew2jew
2008-12-02, 12:23 PM
@Davidbrayan:

Do you think in your procedures (discussed on other thread) alone can make a fully working Tems Phone (+ Pocket & GPS)? I follow all the instructions you mentioned, but failed to make one. Instead, when I'm done with your last step (no choice) I just write the script (incomplete) spread by the_laser at GSM forum to just make a Pocket (w/ 2 db discrepancy) ;0.

You ever test compare org 2 TEMS? i think not equal dB maybe discrepancy 1-2 dB.

jew2jew
2008-12-02, 12:37 PM
2 Questions:

1. Is the activation script has Full lisence for K800i Inv.+Pocket+GPS?

2. If I re write the backed uo original GDFS, Is the phone come bac to normal mode(without any activation)?

Thanks

if u need to try. and u have org GDFS TEMS k800i, i can transfer license from org GDFS TEMS to retail GDFS phone. and without effect your calibrate data.

f1cy
2009-01-17, 12:14 AM
if u need to try. and u have org GDFS TEMS k800i, i can transfer license from org GDFS TEMS to retail GDFS phone. and without effect your calibrate data.

it mean we can backup GDFS with Full lisence for K800i Inv.+Pocket+GPS:rolleyes:
but i don't have Full lisence for K800i Inv.+Pocket+GPS:L

grid666
2009-01-17, 12:54 AM
it mean we can backup GDFS with Full lisence for K800i Inv.+Pocket+GPS:rolleyes:
but i don't have Full lisence for K800i Inv.+Pocket+GPS:L


There is no FREE full TEMS Pocket licence

So, if you need to play with phone, partial licence is ok.

forreal work, it requires real stuff. :)

regards

parto_tegal
2009-01-17, 01:04 AM
There is no FREE full TEMS Pocket licence

So, if you need to play with phone, partial licence is ok.

forreal work, it requires real stuff. :)

regards

Real stuff costs $$$ holala.....
Regards
parto_tegal

f1cy
2009-01-17, 02:04 AM
if u need to try. and u have org GDFS TEMS k800i, i can transfer license from org GDFS TEMS to retail GDFS phone. and without effect your calibrate data.


There is no FREE full TEMS Pocket licence

So, if you need to play with phone, partial licence is ok.

forreal work, it requires real stuff. :)

regards

hmm..i see, maybe anyone can hxcx it

grid666
2009-01-17, 03:32 AM
hmm..i see, maybe anyone can hxcx it


if it was possible, it would be done already

gsmmangi
2009-01-17, 12:54 PM
Sir David,

Once I've loaded the TEMS K800i GDFS file onto K800i will I be able to connect the phone to TEMS Investigation 8.X without any problem? Or is there a further script I need to load first before I can connect to TI 8.X

Please confirm????


Thanks:):)




This is GDFS from TEMS Activated K800i phone,
Use it the way we use on K790,
Not sure about Calibration data,
Backup your GDFS first before doing anything to your phone.


BR
db

parto_tegal
2009-01-17, 01:04 PM
Sir David,

Once I've loaded the TEMS K800i GDFS file onto K800i will I be able to connect the phone to TEMS Investigation 8.X without any problem? Or is there a further script I need to load first before I can connect to TI 8.X

Please confirm????


Thanks:):)

Instead, you will kill your phone Bro... Dig more info, I've posted a lot of discussions about this...
Regards
parto_tegal

garry
2009-04-26, 01:08 PM
So this works? All the scripts I've found to date do not work.

butaktelco
2009-04-26, 02:03 PM
Thats OLD phone...
Lets try to learn NEW PHONE ....
like C702,Z750...

script is different...(totally Different)

maybe someone can calcullate for new script

if everybody Need script K800/K790/k600/W600 maybe can contact me on PM

becarefull if restore other gdfs to your phone, can damage your phone,
dont try to use test point DB2020 if not experience, this action can be damage/dead/break your phone....

dont wasted time, just use Cost only $$$ for the best solution:)

BR

simri2god
2009-04-29, 08:31 PM
I got GPS-BT55S to work on K800 but not to work on TI x.x.x.

http://img.techpowerup.org/090429/DSC00001.jpg (http://img.techpowerup.org/090429/DSC00001.jpg[/IMG])


http://img.techpowerup.org/090429/DSC00002.jpg (http://javascript<b></b>:SelectAndCopy('vbblink'))

siborjong
2009-04-30, 02:25 AM
butaktelco right you must buy script activation.

http://www.finetopix.com/attachment.php?attachmentid=3973&stc=1&d=1241025689

http://www.finetopix.com/attachment.php?attachmentid=3974&stc=1&d=1241025689

try this method, buy some handset k800i from butaktelco and use davidbrayan method (take k800i from butaktelco and replace it yours) :D


****kabor......

zphdt
2009-05-05, 04:03 PM
i need scripts....

cun-xinh
2009-05-17, 02:04 PM
Could u share with me some inform like, what information I will give you, GDFS file or Imei? anh How much I will pay you for each scrip that active GPS funtion for k800i. Please send me some informtion via email giang.ngtr@gmail.com

Thanks

cun-xinh
2009-05-17, 02:06 PM
Could u share with me some inform like, what information I will give you, GDFS file or Imei? anh How much I will pay you for each scrip that active GPS funtion for k800i. Please send me some informtion via email giang.ngtr@gmail.com

Thanks




Thats OLD phone...
Lets try to learn NEW PHONE ....
like C702,Z750...

script is different...(totally Different)

maybe someone can calcullate for new script

if everybody Need script K800/K790/k600/W600 maybe can contact me on PM

becarefull if restore other gdfs to your phone, can damage your phone,
dont try to use test point DB2020 if not experience, this action can be damage/dead/break your phone....

dont wasted time, just use Cost only $$$ for the best solution:)

BR

blast
2009-05-17, 02:57 PM
Contact Admin for script....:D

x_xx6283
2009-05-17, 05:08 PM
This is GDFS from TEMS Activated K800i phone,
Use it the way we use on K790,
Not sure about Calibration data,
Backup your GDFS first before doing anything to your phone.


BR
db

hi,
I have K800i phone with full tems license, how i can take GDFS and use it for other phones, if i can take it, i will share it here also, just learn me, you can see my share,

adika
2009-05-20, 04:32 AM
hi,
I have K800i phone with full tems license, how i can take GDFS and use it for other phones, if i can take it, i will share it here also, just learn me, you can see my share,

Hi !
The procedure is relatively simple...
Download setool2lite from here http://www.4shared.com/file/75345504/4c6b8665/Setool2lite_V111.html
You do not any need dongle (box) ! Just the software.

Unpack Setool2liteV1.11.rar in a folder.
Install first the "USBFlash driver" from the "drivers" subfolder, from the package. Is for recognize the phone like usb flash chip. You need the usb datacable. Normally is on the original phone package. If you connect the phone via usb windows will ask for driver. Indicate him the path ! On windows alert message, simply put "continue anyway".
After ready, push enter on setool2lite.exe
Select the phone type (K800).
Connect the usb cable only in the computer.
Remove the battery, the sim and memory card from the phone.
Put back only the battery. Do not switch on the phone !!!
Push "identify" on setool2lite.
Now press "C" button on the phone and keeping it down connect the usb cable on the phone.
Now you can release the "C" button.
You will see the message flow on the display area of setool.

The procedure is the same for "read flash" and for "read gdfs"

DO NOT WRITE ANYTHING !!! ONLY READ IT !

have fun !

x_xx6283
2009-05-20, 05:05 AM
Hi !
The procedure is relatively simple...
Download setool2lite from here http://www.4shared.com/file/75345504/4c6b8665/Setool2lite_V111.html
You do not any need dongle (box) ! Just the software.

Unpack Setool2liteV1.11.rar in a folder.
Install first the "USBFlash driver" from the "drivers" subfolder, from the package. Is for recognize the phone like usb flash chip. You need the usb datacable. Normally is on the original phone package. If you connect the phone via usb windows will ask for driver. Indicate him the path ! On windows alert message, simply put "continue anyway".
After ready, push enter on setool2lite.exe
Select the phone type (K800).
Connect the usb cable only in the computer.
Remove the battery, the sim and memory card from the phone.
Put back only the battery. Do not switch on the phone !!!
Push "identify" on setool2lite.
Now press "C" button on the phone and keeping it down connect the usb cable on the phone.
Now you can release the "C" button.
You will see the message flow on the display area of setool.

The procedure is the same for "read flash" and for "read gdfs"

DO NOT WRITE ANYTHING !!! ONLY READ IT !

have fun !

thanks i will do it and i will share it

for write what should i do?
i mean i buy new K800 how i should install it? what data i need to take from my existing phone?

THanks

adika
2009-05-20, 05:51 AM
thanks i will do it and i will share it

for write what should i do?
i mean i buy new K800 how i should install it? what data i need to take from my existing phone?

THanks

You need one fully unlocked phone (not patch unlock), you must "write flash" with the "main" and "fs" and custom files. And finaly, unfortunately, you must buy from somebody here the generated activation script for tems investigation, tems pocket and tems gps. Is not too much, but is not free... For taste, you can activate only tems pocket for free, but with altered calibration values. That`s today. Is more easy with K790, but it is only GSM and DCS. No 3G...
Put your tems phone gdfs readout on share, maybe we can see something...
Normally on K800 the gdfs is not interchangeable. Some checksum depends on imei and other stuff. If you copy it direct the phone will not start.

BR

x_xx6283
2009-05-20, 06:09 AM
You need one fully unlocked phone (not patch unlock), you must "write flash" with the "main" and "fs" and custom files. And finaly, unfortunately, you must buy from somebody here the generated activation script for tems investigation, tems pocket and tems gps. Is not too much, but is not free... For taste, you can activate only tems pocket for free, but with altered calibration values. That`s today. Is more easy with K790, but it is only GSM and DCS. No 3G...
Put your tems phone gdfs readout on share, maybe we can see something...
Normally on K800 the gdfs is not interchangeable. Some checksum depends on imei and other stuff. If you copy it direct the phone will not start.

BR

my friend i am at home now and i have K790 phone with tems, i download that setool, i connect and it read flash and gdfs, but it dont save any where. it is only read and i can see in the windows, haw i can save it to use for other phone?

i can share K790 now, and i will share k800 tomorrow when i reach it. maybe you can solve script problem.

isee like this in windows
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
.............

x_xx6283
2009-05-20, 06:16 AM
You need one fully unlocked phone (not patch unlock), you must "write flash" with the "main" and "fs" and custom files. And finaly, unfortunately, you must buy from somebody here the generated activation script for tems investigation, tems pocket and tems gps. Is not too much, but is not free... For taste, you can activate only tems pocket for free, but with altered calibration values. That`s today. Is more easy with K790, but it is only GSM and DCS. No 3G...
Put your tems phone gdfs readout on share, maybe we can see something...
Normally on K800 the gdfs is not interchangeable. Some checksum depends on imei and other stuff. If you copy it direct the phone will not start.

BR

i dont know what should i do for the red lines ;)

actuly we need manual from first to end, you are expert pleas help us,

i share what ever i reach from here,

thanks for your help

x_xx6283
2009-05-20, 07:16 AM
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

ChipID:9900,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3522......... CERT:BROWN
FLASH CID:49 COLOR:BROWN
CID not supported
Elapsed:9 secs.

x_xx6283
2009-05-20, 07:19 AM
Welcome to SEtool2 ( LITE edition ) v 1.11
supported DB2010/DB2012 CID49/50/51/52, DB2020 CID49/51/52
Loaded 51 flash descriptors

if you like LITE edition - please visit www.setool.net and buy FULL.

Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3522.......... CERT:BROWN
FLASH CID:49 COLOR:BROWN
CID not supported
Elapsed:5 secs.


but i dont know from where i should reach files that read and use it for other phone.


Thanks

x_xx6283
2009-05-20, 07:21 AM
i found one GDFS for K800, i dont know how we can use it? but i share it.

simri2god
2009-05-20, 09:25 AM
my friend i am at home now and i have K790 phone with tems, i download that setool, i connect and it read flash and gdfs, but it dont save any where. it is only read and i can see in the windows, haw i can save it to use for other phone?

i can share K790 now, and i will share k800 tomorrow when i reach it. maybe you can solve script problem.

isee like this in windows
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:49
.............

Do you use SETool lite or SETool full version?

Brown phones is not supported on lite version, on full version if the phone is brown read GDFS is supported but write GDFS in bin format and write script is not supported (setool dont have needed db2020 brown cs loader/applet). i have tested add custom db2020 brown cs loader on setool full version and XS++ without good result.

I have uncrypted erom to convert to red cid 52 if you need (DB2020_EROM_Wilma_Red52_R3A016_signed_by_Brown49).
Is for K800 (Wilma) but works on all K610, K800, K810 tested.

you can use XS++ to flash the file.

Oh
On SETool full version if you read flash or read GDFS @
Empty Fill Tab the file saves in same folder as SETool in following format (exmpele):

http://img.techpowerup.org/090519/Read_Flash.jpg (http://img.techpowerup.org/090519/Read_Flash.jpg)
http://img.techpowerup.org/090519/Read_GDFS.jpg (http://img.techpowerup.org/090519/Read_GDFS.jpg)

simri2god
2009-05-20, 09:37 AM
i found one GDFS for K800, i dont know how we can use it? but i share it.

I have checked the file no TEMS trace, no license.



Generic
EUROPE_4
CDA111111/DEV
R2A
cxc1250813
R1KC001

siborjong
2009-05-20, 09:52 AM
@simri2god

Can you explain what function of Read Flash and why "Empty Tab & Repair"?

Should we use Sonye******* tab to flash, read gdfs and etc. You using different method.

simri2god
2009-05-20, 12:40 PM
If phone is DB2020 and brown you try read GDFS in SonyE******* Tab you get No situable fsloader (csloader) found. If the phone is red (retail) use SonyE******* Tab

http://img.techpowerup.org/090519/No_situable_fsloader_found.jpg (http://javascript<b></b>:SelectAndCopy('vbblink'))

Forget about Read flash...

den999990
2009-05-20, 01:00 PM
I think I can create license calculator but I need some read GDFS files from real tems phones to check the algo

x_xx6283
2009-05-20, 03:42 PM
Do you use SETool lite or SETool full version?

Brown phones is not supported on lite version, on full version if the phone is brown read GDFS is supported but write GDFS in bin format and write script is not supported (setool dont have needed db2020 brown cs loader/applet). i have tested add custom db2020 brown cs loader on setool full version and XS++ without good result.

I have uncrypted erom to convert to red cid 52 if you need (DB2020_EROM_Wilma_Red52_R3A016_signed_by_Brown49).
Is for K800 (Wilma) but works on all K610, K800, K810 tested.

you can use XS++ to flash the file.

Oh
On SETool full version if you read flash or read GDFS @
Empty Fill Tab the file saves in same folder as SETool in following format (exmpele):

http://img.techpowerup.org/090519/Read_Flash.jpg (http://img.techpowerup.org/090519/Read_Flash.jpg)
http://img.techpowerup.org/090519/Read_GDFS.jpg (http://img.techpowerup.org/090519/Read_GDFS.jpg)

my friend, my setool is lite. can you share full version? i have lots of phones with tems that i can share it if i can save flash and GDFS.

thanks

x_xx6283
2009-05-20, 03:45 PM
I have checked the file no TEMS trace, no license.



Generic
EUROPE_4
CDA111111/DEV
R2A
cxc1250813
R1KC001



i found it internet, as soon as i learn how to read and save GDFS i will share GDFS with tems,

simri2god
2009-05-20, 05:19 PM
my friend, my setool is lite. can you share full version? i have lots of phones with tems that i can share it if i can save flash and GDFS.

thanks

Full version is dongel protected with e-gate Smart Card (SchlumbergerSema Cyberflex e-gate)

butaktelco
2009-05-20, 05:30 PM
@simri2god

Can you explain what function of Read Flash and why "Empty Tab & Repair"?

Should we use Sonye******* tab to flash, read gdfs and etc. You using different method.

Read Flash : read all firmware on retail phone sony e*******, & you can restore firmware to other phone but this for level advance

tab empty & repair : convert certificate colors for all e******* phone to brown with any methode, & can repair damage extended rom ( erom),

BR

GSM_Huawei
2009-05-20, 06:06 PM
my phone is K800i with CID 53 COLOR RED ,when i can't flash firmware TEMS R2B the SETOOL 3 BOX.
how to convert from CID 53 to CID 52 with SETOOL 3BOX

adika
2009-05-21, 01:06 AM
If phone is DB2020 and brown you try read GDFS in SonyE******* Tab you get No situable fsloader (csloader) found. If the phone is red (retail) use SonyE******* Tab

http://img.techpowerup.org/090519/No_situable_fsloader_found.jpg (http://javascript<b></b>:SelectAndCopy('vbblink'))

Forget about Read flash...

Sorry x_xx6283 !
I`m not an expert :), i just read the forum !
I used only setool2lite for red (retail, commercial) phones. Tems is brown (research&developement) phone. Other security platform or whatever... I read now, specialists said, you can (here my info is confused!!) read out the gdfs from brown phones only with setool3 full version (included the setool3 box, which is one hardware device)...

Then, i don`t know how we can read out one original tems brown phone...
I heard one setool box is around 150 euro... :(
The simplest method is to go with the phone in one service who had this setool3 box and read out there the GDFS...

Other opinions ? 8-)

simri2god
2009-05-21, 01:24 AM
my phone is K800i with CID 53 COLOR RED ,when i can't flash firmware TEMS R2B the SETOOL 3 BOX.
how to convert from CID 53 to CID 52 with SETOOL 3BOX

If you have SETool 3 Box (full version) you dont need to convert to CID 52 to flash TEMS (brown), use alternative security bypass.

adika
2009-05-21, 01:36 AM
Hi simri2god !
You said in post 35 (and the screenshot is attached):

If phone is DB2020 and brown you try read GDFS in SonyE******* Tab you get No situable fsloader (csloader) found.

And you said in post 32:

Do you use SETool lite or SETool full version?

...on full version if the phone is brown read GDFS is supported but write GDFS in bin format and write script is not supported (setool dont have needed db2020 brown cs loader/applet)...


I did not understand if you spoke in post 32 about K790 or K800.
You have experience in this ! Please clarify for me if is possible to read out the gdfs of K800 with setool3 full or not.
Because i planned also to read out 4 pieces of K800 tems phones...
I must travel to get them... :(
I want not to buy setoolbox if i cannot use it...

Many Thanks !

adika
2009-05-21, 01:45 AM
Hi !
I never tryed , but the K800 tems phone is working also in 3G, yes ?
I used it only in gsm, dcs...
Thanks

simri2god
2009-05-21, 02:46 AM
Hi simri2god !
You said in post 35 (and the screenshot is attached):


And you said in post 32:


I did not understand if you spoke in post 32 about K790 or K800.
You have experience in this ! Please clarify for me if is possible to read out the gdfs of K800 with setool3 full or not.
Because i planned also to read out 4 pieces of K800 tems phones...
I must travel to get them... :(
I want not to buy setoolbox if i cannot use it...

Many Thanks !

You have experience in this: Yes

K790 and K800 use same DB2020
Yes read GDFS is supported (CID:49,51,52,53 Color: Brown and Red)


Hi !
I never tryed , but the K800 tems phone is working also in 3G, yes ?
I used it only in gsm, dcs...
Thanks

Yes you can "lock" to GSM or 3G
Pocket meny -> Cell control -> Lock to RAT:
(o) Off
( ) WCDMA
( ) GSM

adika
2009-06-05, 06:10 AM
@ simri2god

Hi !
How can i read the gdfs from one K800 original tems phone ?
I want to use software tools without dongle (i want not to buy one only for this).
If i cannot with free tools, could i connect it to "i don`t know what server", to pay online and obtain the gdfs ?

Thanks !

simri2god
2009-06-06, 08:45 AM
Hi !
How can i read the gdfs from one K800 original tems phone ?
I want to use software tools without dongle (i want not to buy one only for this).
If i cannot with free tools, could i connect it to "i don`t know what server", to pay online and obtain the gdfs ?

Thanks !

original tems phone=cid 49 brown

Alt1:
Use Cruiser DB2020 GDFS Reader (free)
Free works on all phones DB2020, gdfs **** is encryptet or unknow encoded
You send gdfs **** to Cruiser and SETool user (me or...)
In Cruiser 13.20 im backup GDFS
Connect agen *flash MAIN and kill @ 25%*
Connect agen write my GDFS backup but disconnect dircet after GDFS format.
Connect agen write you GDFS **** to my K800 brune
swicht dongel
run setool make GDFS **** and send to you.

*flash MAIN and kill @ 25%* to make sure the phone not power on and write to GDFS

disconnect dircet after GDFS format to make GDFS empty



Alt2:
make phone RED CID: 52

Use XS++
Connect via 2+5
add DB2020_EROM_Wilma_Red52_R3A016_signed_by_Brown49.ssw in MAIN

Flash

Wilma=K800 but works on K610,K790,K800,K810



EROM: R3A016
prgCXC1250461_EROM_DB2020_WILMA_FOTA_SIMLOCK_FLAFLA_SIBLEY_SEMCUSB

adika
2009-06-06, 05:32 PM
@ simri2god, @ x_xx6283 original tems phone=cid 49 brown



Hi x_xx6283 ! With the gdfs reader from the post below you can read out the gdfs from the original K790 or K800 tems phone ! You will obtain it in one encrypted format.

If you send the *.mdc file to simri2god he can restore it to be decrypted *.bin file. I will try also to read out some original tems phones gdfs, will post them, maybe somebody could find the activation algoritm.
Bye !

f1cy
2009-06-06, 07:10 PM
@ simri2god
whether CID 53 COLOR RED can be converting to CID 52 with script??

simri2god
2009-06-06, 08:30 PM
@ simri2god
whether CID 53 COLOR RED can be converting to CID 52 with script??

no

But via Server or Test Point (no free tools).

parto_tegal
2009-06-07, 01:02 PM
Hi
Why avoiding to buy SETool3 Box if you can do a lot of things with this?

To do DB2020 CID53, no other way without it... the followings are the most possible ways:

1. CID53 as it is: use SETool3 Box with Setool2g Program (the latest)
2. Downgrade CID: use SETool3 Box with Test Point procedure
3. Replace the Flash IC and use Empty Fill procedure (you can get CID49 Brown as original TEMS one)

Further, you can only do A2 TEMS (Z750, C702, W760) with this... and very soon C905 wowowow.....

Regards
parto_tegal

siborjong
2009-06-07, 01:41 PM
oh boy.. it's more difficult

ussrback
2009-06-10, 05:27 PM
So for summary
Is it possible to make k800i tems phone without laser script?
Or the only way is still that solution?

zleizero
2010-04-06, 03:26 PM
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

freakturd06
2010-04-08, 07:10 PM
This is GDFS from TEMS Activated K800i phone,
Use it the way we use on K790,
Not sure about Calibration data,
Backup your GDFS first before doing anything to your phone.


BR
db

Please upload sir in 4shared.Thanks.

venty
2010-04-15, 01:44 PM
all

Please help me to contact the_laser
Any body have his email?
I need Tems K800


BR/Ve

freakturd06
2010-04-15, 02:03 PM
all

Please help me to contact the_laser
Any body have his email?
I need Tems K800


BR/Ve

You can send email to his reseller at evdv_gz@hotmail.com . Didn't try to contact it yet but i got this in one of the forums.

EJAY
2010-04-15, 02:54 PM
haha parekoy puspusan ang paghahanap ng tool ah. meron ako z750i di ko pa nga lng na flash. if u want bili k z750i then install natin dun. free un. libre mo nlng ako sa starbucks kapag gumana! hehehe joke

freakturd06
2010-04-15, 05:44 PM
haha parekoy puspusan ang paghahanap ng tool ah. meron ako z750i di ko pa nga lng na flash. if u want bili k z750i then install natin dun. free un. libre mo nlng ako sa starbucks kapag gumana! hehehe joke

Hehehe. Interesado sir matuto. Hanap ako sir bukas na bukas din hahaha. Promise yan ha. Salamat Sir.

vci07
2010-04-30, 11:27 PM
Hehehe. Interesado sir matuto. Hanap ako sir bukas na bukas din hahaha. Promise yan ha. Salamat Sir.

baka pwede ako sumali sa raket nyo? hehe:p

Stone_fman
2010-05-25, 05:12 AM
hic, k post k cho xem, po tay

bobe868
2010-06-14, 05:42 AM
Removed post..

bobe868
2010-06-14, 05:43 AM
Sorry my phone is a K810i..Thank you..

bobe868
2010-06-14, 07:17 AM
removed post..

skip2004
2010-07-06, 10:10 PM
it don't work ,what can i do

Stone_fman
2010-07-07, 06:42 PM
Don't anyone say!!!
All' re only ask...no answer!!!
Why

shak33
2010-07-07, 07:08 PM
it don't work ,what can i do


Don't anyone say!!!
All' re only ask...no answer!!!
Why

yes, the gdfs not work..u need script...

shak33
2010-07-07, 07:43 PM
Sorry my phone is a K810i..Thank you..

you can downgrade to K800

rickymartin28
2010-07-08, 03:03 AM
Dear Sir,

Will u please give me t800 gdfs i am not able to download it,

my mail id is mrxyz28@yahoo.co.in


Thanks;

regards,
Ricky martin
i found one GDFS for K800, i dont know how we can use it? but i share it.


This is GDFS from TEMS Activated K800i phone,
Use it the way we use on K790,
Not sure about Calibration data,
Backup your GDFS first before doing anything to your phone.


BR
db

tomcatsniper
2010-07-20, 09:18 AM
Guys, I had some issues with my K800 using the scripts on the forum. I knew they are not okay but I wanted to test.

So...the procedure went fine with upgrade and apply the script (I backed up the GDFS area before just in case) but after 3-4 weeks the phone started to act weird. The signal was shitty, microphone was not working correctly, phone hang a few times.... I reverted back to original GDFS and latest firmware for K800 and the phone doesn't have any problems.

I my opinion don't use any script if you are not 100% sure it is working!

Cheers!

binladen
2010-08-01, 02:39 PM
Hello everyone,
Please don't update in this attachment. If you update GDFS from other K800, your phone will be died.

lennon111214
2011-02-03, 10:12 PM
Thats OLD phone...
Lets try to learn NEW PHONE ....
like C702,Z750...

script is different...(totally Different)

maybe someone can calcullate for new script

if everybody Need script K800/K790/k600/W600 maybe can contact me on PM

becarefull if restore other gdfs to your phone, can damage your phone,
dont try to use test point DB2020 if not experience, this action can be damage/dead/break your phone....

dont wasted time, just use Cost only $$$ for the best solution:)

BR

Bro.. mau tanya..

bisa inject k800 CID53, dulu nya hp gw tems CID 52 tp gara di upgrade firmware udh ngk bisa lagi...

thnks b4

siborjong
2011-02-07, 05:36 PM
Bro.. mau tanya..

bisa inject k800 CID53, dulu nya hp gw tems CID 52 tp gara di upgrade firmware udh ngk bisa lagi...

thnks b4

use SETOOL 3 BOX

butaktelco
2011-02-08, 04:24 AM
Bro.. mau tanya..

bisa inject k800 CID53, dulu nya hp gw tems CID 52 tp gara di upgrade firmware udh ngk bisa lagi...

thnks b4

please respect on forum....don't use local language :D
btw i know you ?

gsm_forumer
2011-02-10, 02:14 PM
Bro.. mau tanya..

bisa inject k800 CID53, dulu nya hp gw tems CID 52 tp gara di upgrade firmware udh ngk bisa lagi...

thnks b4

still need it?
PM me

shak33
2011-02-10, 04:59 PM
Use SETOOLBOX.. not SEtool lite...

lokasimu dimana?? saya dapat membantu...


Bro.. mau tanya..

bisa inject k800 CID53, dulu nya hp gw tems CID 52 tp gara di upgrade firmware udh ngk bisa lagi...

thnks b4

butaktelco
2011-02-10, 06:08 PM
1.Use Far manager...fishing with other firmware to make restoration...then flashing firmware tems & write script...free tools
2. use setool box use starting software v1.0 reset develper mode this we must have setool box

only can do with this way:)

drJaser
2011-02-10, 08:37 PM
I did it an hour ago.. :)

the only thing which I missed in all posts before is that you must press "C" for flashing filesistem + software and buttons "2+5" for flashing GDFS and activation script..

next thing is that for flashing filesistem + software I had to check "bypass DB2020 security"
for flashing GDFS and script it should be unchecked..

for now everything works ..even position with Bluetooth GPS :)
must buy M2 card today to start recording logs...

the only problem I have right now is connection with my TEMS 9 on laptop..
the phone is detected.. but only data part connects right .. Air interface connection fails everytime.. "Connect fail" or something similar.. I don't remember

I changed drivers.. reinstall them again.. still nothing ...

any idea what is happening ??

BR,
drJ

butaktelco
2011-02-11, 03:25 PM
Try to reinstall driver....
try to reflash again your phone
try to rebase gdfs again...

check io your phone...

if still can not....
buy new phone:)

check license of tems investigation & make sure your license support for your phone

loihut
2011-07-19, 12:54 PM
I did it an hour ago.. :)

the only problem I have right now is connection with my TEMS 9 on laptop..
the phone is detected.. but only data part connects right .. Air interface connection fails everytime.. "Connect fail" or something similar.. I don't remember

I changed drivers.. reinstall them again.. still nothing ...

any idea what is happening ??

BR,
drJ

I'm also have same prob as drJase. Can Anybody help? Thank!

ching2-o
2011-07-19, 02:15 PM
I'm also have same prob as drJase. Can Anybody help? Thank!

try to roll back the drivers installed from your laptop and install/update this driver attached. As you can see, it should indicate "Sony E******* Device 039..." as other will indicate "Sony E******* Device 0016.." from your device manager. Updating driver will fix your problem and can connect to TI 9 surely

iCloud
2011-08-01, 12:41 PM
Can anybody post the produce step by step to active TEMS K800 i ?
And how about the script to active full license ? How much is it
Tks a lot

loihut
2011-08-01, 10:15 PM
Can anybody post the produce step by step to active TEMS K800 i ?
And how about the script to active full license ? How much is it
Tks a lot

You follow steps blow:

- Flash Firmware (Main and FS)
- Flash License

The script to active full license have shared on this Forum

iCloud
2011-08-02, 11:11 AM
You follow steps blow:

- Flash Firmware (Main and FS)
- Flash License

The script to active full license have shared on this Forum

Tks bro
But this scrip is just clone , so it will make wrong measurements ?

iCloud
2011-08-05, 10:56 AM
Hi bro
Can u tell us how to define a MS is using clone or right scripts ? After flashing

12345
2012-06-24, 08:59 AM
if i use this gdfs my phone is not dead?? it's can be connect with TI,

cause i have instal tems pocket but in TI no licence..

thachthao192
2012-08-07, 03:29 PM
i need scrip active tems 9, pls for me. thanks

dongle.dt
2012-09-01, 05:27 AM
This is GDFS from TEMS Activated K800i phone,
Use it the way we use on K790,
Not sure about Calibration data,
Backup your GDFS first before doing anything to your phone.


BR
db

Good post, will it work fine?

dongle.dt
2012-09-01, 05:36 AM
for those old buddy $$$$ ?

dongle.dt
2012-09-01, 05:41 AM
i had d prob and couldn't solve
any solution?

I'm also have same prob as drJase. Can Anybody help? Thank!

tuyul
2012-09-03, 09:07 AM
what for the problem??

just searching in this forum..u can fine ur solution

br

tuyul

Jerry
2012-09-04, 12:43 AM
Good post, will it work fine?
It worked for me.