PDA

View Full Version : TEMS ACTIVATION K790i GDFS



Pages : [1] 2

davidbrayan
2008-11-23, 04:15 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david

davidbrayan
2008-11-23, 11:11 PM
yes , its tested.
dont worry.
just keep your original GDFS and do anything.

BR
db

shoaibf
2008-11-24, 04:31 AM
Can any one tell me which cable should i use to Flash and interface retial phone with TEMS

nivra
2008-11-24, 09:41 AM
Can any one tell me which cable should i use to Flash and interface retial phone with TEMS

use USB cable included in the package when you buy a retail phone. If you don't have setool3 then use setool2lite. :-)

BR

jew2jew
2008-11-24, 12:28 PM
yes.it work full license.but i think this GDFS not come from original TEMS k790i.

blast
2008-11-29, 10:47 PM
is it only for k790 ? anyone have k800 ?

f1cy
2008-11-30, 08:29 PM
it compatible for K800?
what about calibratation? it's included. thank's

shahram
2009-01-25, 06:50 PM
SEtool2lite needs box or just connecting the phone's simple cable is enough?!

//Shahram

grid666
2009-01-25, 07:04 PM
SEtool2lite needs box or just connecting the phone's simple cable is enough?!

//Shahram


Shahram

No, you can use common DCU-60 USB cable !

munzekonza
2009-01-25, 07:49 PM
David,
this model doesnt support wcdma tech, so there is no 3G MONITORING in tems pocket application. It only has gsm and gprs. Am I right?
BR
MK

davidbrayan
2009-01-25, 08:06 PM
for that you need k800 or other 3G capable phone.
and different methode to activate licenses.

BR
db

Lesmana
2009-01-26, 04:46 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david


Thanks a lot david...few queries....

---after using your GDFS, what happen to the calibration data ? this is the most important for any realtime measurement...othewise the measurement report will show a imaginary value and will not be suitable for any important task like Drive Test.

---which data cable is suitable for the data collection during DT after activating the K790 handsets by ur GDFS ? i mean, the cable which we get while buying a retail phone from the shop is enough? or we have to collect other special data cable like in T610.

----would you please upload the step by step guide to activate TEMS in K790i like what you did in the case of HASP HL Emulation guide.


FINALLY ....CAN SOME ONE UPDOAD THE gdfs IN RAPIDSHARE FOR MANY OF US THOSE DONT HAVE DL PERMISSION ? WILL BE HIGHLY APPRECIATED WITH LOTS OF THANKS........

THANKS......

anwar
2009-02-03, 10:17 AM
Im interest to activate 3G. can you teach me master??:)


for that you need k800 or other 3G capable phone.
and different methode to activate licenses.

BR
db

siborjong
2009-02-04, 01:43 AM
I have try this method and work properly on k790 and can connect to tems 8.03 btw don't use this gdfs to k800i, your phone has died.

croleg
2009-02-05, 12:27 PM
Reference on video guide on the theme: how correct flash SE with SETOOL

http://www.setool.net/video/index.php

Lesmana
2009-02-06, 03:40 AM
I have try this method and work properly on k790 and can connect to tems 8.03 btw don't use this gdfs to k800i, your phone has died.


@Siborjong....

Is there any document how to flash K790 for TEMS Activation ?...please share if any....Or would you please write down the steps here how to activate TEMS in K790 handsets ?

mayank_shah
2009-02-07, 12:42 PM
How can i use SETool2lite, if i am using normal cable, I am not able to flash it. any additional Box or something required?

BR//

kastu
2009-02-10, 01:07 AM
what is gdfs?just newbie here...

zaebolll
2009-02-10, 02:51 AM
what is gdfs?just newbie here...

GDFS = Global Data Flash Storage (contains IMEI, calibration data, etc).

Lesmana
2009-02-10, 03:13 AM
Please share a tutorial guide of step by step procedure to activate TEMS in K790 or K800

Anton
2009-02-10, 04:18 PM
Please say me k790c is the same, that k800 or no? I dont understand. And if i use ur GDFS for k790c its normally?

Sanks :)

ussrback
2009-02-10, 04:38 PM
I can lease k800 tems phone for a few days.
How can i make clone of this phone?
please write steps which i have to carry to clone Tems phone:

1. Download GDFS from Tems K800i

Fekroun
2009-02-15, 07:12 AM
please upload to rapidshare !!

mobiltel269
2009-03-05, 12:39 AM
it good man i will test now

scree
2009-03-05, 04:40 AM
TEMS ACTIVATION K790i GDFS

deadman000
2009-03-06, 02:35 AM
hi frnds, can anybody endorse the fact that calibration data remains safe after flashing another fone's gdfs and reflashing the fone with original backed-up gdfs?
thanks anyways david...u r great help no doubt

simri2god
2009-03-06, 03:15 AM
hi frnds, can anybody endorse the fact that calibration data remains safe after flashing another fone's gdfs and reflashing the fone with original backed-up gdfs?
thanks anyways david...u r great help no doubt

Yes this safe to do.

//adv SETool & Cruiser user.

siborjong
2009-03-06, 09:53 PM
I can lease k800 tems phone for a few days.
How can i make clone of this phone?
please write steps which i have to carry to clone Tems phone:

1. Download GDFS from Tems K800i

You can't clone it man, you must buy script from the_laser to enable it.

xManiac
2009-03-07, 12:01 AM
can someone upload the tems GDFS for K790i on Rapidshare, 4shared or megaupload and share the link

siborjong
2009-03-07, 12:19 AM
can someone upload the tems GDFS for K790i on Rapidshare, 4shared or megaupload and share the link

here the link's

http://www.4shared.com/file/91445942/34be19a9/k790i.html

Don't forget to add my reputation :D

vibs75
2009-03-08, 02:06 AM
many thanks brother

xiaoduirensheng
2009-03-11, 06:21 PM
good think
thangk you

shahram
2009-03-12, 03:40 PM
I have tested and it works fine,

Lesmana
2009-03-12, 04:45 PM
I have tested and it works fine,

To Shahram......

What about the calibration data? have u checked or compare the Rx_Levels by your TEMS activated K790i ?

shahram
2009-03-12, 05:49 PM
the only way I could test it was to put it in similar situation with an original TEMS handset,and compare the result in TEMS Inv.
Almost the same result! (RxLev)
but there is no way to be sure about it theoretically,because falshing might cause to 2~3 dB offset in measurement which can't be so obvious during above test method.

siborjong
2009-03-12, 06:29 PM
@shahram

bro, do you have software to flashing t610, i have tried for looking div lpt dongle but not get it :(

Lesmana
2009-03-12, 07:02 PM
the only way I could test it was to put it in similar situation with an original TEMS handset,and compare the result in TEMS Inv.
Almost the same result! (RxLev)
but there is no way to be sure about it theoretically,because falshing might cause to 2~3 dB offset in measurement which can't be so obvious during above test method.

For K790i, Do i need any special data cable or the cable provided with the retail phone is enough for data collection.

yy19820503
2009-03-12, 10:19 PM
Appreciation too, I just need to

simri2god
2009-03-13, 12:03 AM
For K790i, Do i need any special data cable or the cable provided with the retail phone is enough for data collection.

Use cable provided with the phone (DCU-60)

http://e4deal.com/images/DCU-60-bg.jpg

shahram
2009-03-13, 04:36 PM
yes,the retail cable is enough.
I was looking for DIV terminator too,since it is an old software it is hard to find,I had no chance,

good luck

vibs75
2009-03-15, 02:03 PM
Dear Shahram,
After putting GDFS , is there any other step to activate TEMS pocket etc, Script etc, as i am able to see TEMS on my k790i but not not able to connect to 8.03, please guide.

Rgds
vibs

georgiadiy
2009-03-15, 10:07 PM
For backing up (old) and flashing (new) GDFS you can use setool2light
here is the link
http://www.4shared.com/file/93024388/4ebbfb97/SEtool2Lite108.html
/*there is no password and any download limitations*/

BR

simri2god
2009-03-16, 12:57 AM
Dear Shahram,
After putting GDFS , is there any other step to activate TEMS pocket etc, Script etc, as i am able to see TEMS on my k790i but not not able to connect to 8.03, please guide.

Rgds
vibs

You need to use TEMS driver for the phone.

K790/K800
http://rapidshare.com/files/209566956/TEMS_8.X.X_Drivers.zip.html

hassen
2009-03-16, 02:19 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david
great job david ,i think now we don't need to buy tems kit
what about newest phone with gps like tems w760i .

continuity friend

simri2god
2009-03-16, 06:08 AM
TEMS_K790_license_reader.txt


gdfsread:00000585


TEMS_K800_license_reader.txt


gdfsread:00000585
gdfsread:00000128
gdfsread:00000129
gdfsread:0000012A
gdfsread:0000012B
gdfsread:0000012C
gdfsread:0000012D
gdfsread:0000012E
gdfsread:0000012F
gdfsread:00000130
gdfsread:00000131
gdfsread:00000132
gdfsread:00000133
gdfsread:00000134
gdfsread:00000135
gdfsread:00000136
gdfsread:00000137
gdfsread:00000138
gdfsread:00000139
gdfsread:0000013A
gdfsread:0000013B
gdfsread:0000013C
gdfsread:0000013D
gdfsread:0000013E
gdfsread:0000013F
gdfsread:00000140
gdfsread:00000141
gdfsread:00000142
gdfsread:00000143
gdfsread:00000144
gdfsread:00000145
gdfsread:00000146
gdfsread:00000147
gdfsread:00000148
gdfsread:00000149
gdfsread:0000014A
gdfsread:0000014B
gdfsread:0000014C
gdfsread:0000014D
gdfsread:0000014E
gdfsread:0000014F
gdfsread:00000150
gdfsread:00000151
gdfsread:00000152
gdfsread:00000153
gdfsread:00000154
gdfsread:00000155
gdfsread:00000156
gdfsread:00000157
gdfsread:00000158
gdfsread:00000159
gdfsread:0000015A
gdfsread:0000015B
gdfsread:0000015C
gdfsread:0000015D
gdfsread:0000015E
gdfsread:0000015F
gdfsread:00000160
gdfsread:00000161
gdfsread:00000162
gdfsread:00000163
gdfsread:00000202
gdfsread:00000203
gdfsread:00000204
gdfsread:00000205
gdfsread:00000206
gdfsread:00000207
gdfsread:00000208
gdfsread:00000209


Warning if you use this K800 activation radio calibration values is overwritten.
if you write back original calibration you get invalid license.

xiaoduirensheng
2009-03-16, 02:01 PM
thank you very much,but can't download

xiaoduirensheng
2009-03-16, 02:03 PM
TEMS_K790_license_reader.txt (17 Bytes, 2 views)
TEMS_K800_license_reader.txt (1.3 KB, 3 views)
K790_TEMS_POCKET_GPS_Activation.txt (138 Bytes, 2 views)
K800_TEMS_POCKET_GPS_Activation.txt (8.4 KB, 4 views)

who can share it thank you

vibs75
2009-03-16, 02:03 PM
Many Thanks Simri2god,
But I had already installed the driver even then it is not getting connected, the error log says MSSWCDMA in the main window and log says License missing UE not connected.
I think it means phone is not still a TEMS phone, even I followed all the steps being suggested by David.Can you please help me out.

Regards


You need to use TEMS driver for the phone.

K790/K800
http://rapidshare.com/files/209566956/TEMS_8.X.X_Drivers.zip.html

davidbrayan
2009-03-16, 03:16 PM
Check your TEMS license, goto
start > programs > TEMS Products > Utilities > TEMS investigation 8.0.3 HASP HL Key reader

and in the windows that popup , goto file > read HASP keys or press Ctrl+r

now it should show all the TEMS licenses installed on your system.

if it shows nothing, there must be a problem with your TEMS investigation licensing.
******** not installed properly or something.

BR
db

davidbrayan
2009-03-16, 03:31 PM
@vibs75

if you were unable to e m u l a t e it properly,
visit

http://www.finetopix.com/showthread.php?t=3469

and download the executable. disable your antivirus , shut down TEMS investigation or any related application if running, before installing the downloaded patch.

BR
db

siborjong
2009-03-16, 04:12 PM
You need to use TEMS driver for the phone.

K790/K800
http://rapidshare.com/files/209566956/TEMS_8.X.X_Drivers.zip.html


bro, do you have software to flashing k800 cid 53 like setool2lite?

georgiadiy
2009-03-16, 04:54 PM
bro, do you have software to flashing k800 cid 53 like setool2lite?

Here is THE link
http://www.4shared.com/file/93024388/4ebbfb97/SEtool2Lite108.html
:rolleyes:
BR

xiaoduirensheng
2009-03-16, 06:32 PM
is it the cid52 or cid53 ,thank you

davidbrayan
2009-03-16, 06:42 PM
as long as i remember setool2lite version 1.11 supports upto CID52
and the link here is of version 1.08 , a lower version .
so technically i dont think it'd support CID53,
havnt tried it yet.

BR
db

sinapit
2009-03-16, 07:52 PM
Here is THE link
http://www.4shared.com/file/93024388/4ebbfb97/SEtool2Lite108.html
:rolleyes:
BR


Are you sure this tool can flash k800 with CID 53???

georgiadiy
2009-03-16, 08:03 PM
Are you sure this tool can flash k800 with CID 53???

Not quite...
In description: support cid49-cid52

As I know you can't use for it any light version of setool

sinapit
2009-03-16, 08:41 PM
hahahhah.... i think just setool3 can flash k800 CID 53, i'm right???

atit
2009-03-16, 09:21 PM
Hi friends

Yes, I trying all these tools setool1.11 or setool1.08 are not working with CID :53, just Setool3 the last version below.

http://www.finetopix.com/showthread.php?t=3327&highlight=setool

But still I think there is no cr@ack for this tool:confused:

Bye

yy19820503
2009-03-16, 09:38 PM
thank you,but i need K800i GDFS

georgiadiy
2009-03-16, 09:55 PM
thank you,but i need K800i GDFS

Go to the very beginning of this thread and download it :)

Also look through http://www.finetopix.com/showthread.php?t=1814&highlight=k800+gdfs&page=7

davidbrayan
2009-03-16, 10:17 PM
if you are looking for K800i GDFS to activate licenses into K800i then i should tell you that we cant use this process on k800i
license is in GDFS area
after you write back your GDFS , the phone gets reverted into retail.
so no use of GDFS rewrites in case of K800i
use script instead

BR
db

Go to the very beginning of this thread and download it :)

Also look through http://www.finetopix.com/showthread.php?t=1814&highlight=k800+gdfs&page=7

siborjong
2009-03-17, 03:48 AM
if you are looking for K800i GDFS to activate licenses into K800i then i should tell you that we cant use this process on k800i
license is in GDFS area
after you write back your GDFS , the phone gets reverted into retail.
so no use of GDFS rewrites in case of K800i
use script instead

BR
db


Yes, right sir david told true. You can't clone your k800i using GDFS another k800i, you must using script to activated it, buy script to the_lasser or Administrator it's perfect way :D

ussrback
2009-03-17, 11:00 PM
what is a price for the script?

yy19820503
2009-03-18, 12:13 AM
Thank you for davidbrayan,
where for scrip to sell?

siborjong
2009-03-18, 02:42 AM
@yy19820503
@ussrback

Read this thread:

http://www.finetopix.com/showthread.php?t=1960

and don't forget to pv administrator

hongjian13
2009-03-19, 04:00 PM
why do you can not to download

hongjian13
2009-03-20, 10:11 AM
thanks thanks

yy19820503
2009-03-26, 02:44 PM
thanks for you .le't me try

vibs75
2009-03-26, 04:45 PM
This script was provided by Laser for k800, but I couldnt test it. For password please mail me and also please dont forget to add my repo/Thanks as I need it.

Rgds
vibs

siborjong
2009-03-26, 11:11 PM
I think the_laser never gave that's script because he sell it.

becarefully that's script can be make your k800i damage :mad:

vibs75
2009-03-27, 02:38 AM
yes you may be right dear, but this script is free from Laser for sure but it doesnt gurantee the calibration data,
rgds
vibs

I think the_laser never gave that's script because he sell it.

becarefully that's script can be make your k800i damage :mad:

Lesmana
2009-03-28, 03:02 AM
Anyone please tell how to findout the CID of K790 handsets.Need to get K790i CID 52 phone but dont know how to findout the CID.

Thanks in advance..

davidbrayan
2009-03-28, 10:11 AM
one easy option is,

look for mfg date, should be in or before Q1 2008,
CID 53 is from Q2 2008 and after.

BR
db

applexx
2009-03-29, 07:54 PM
Who knows how to increase reputation power?

grid666
2009-03-29, 08:15 PM
Who knows how to increase reputation power?


Look in the right upper corner of your post box, you will notice weighing scale, just click on it to increase reputation of person who posted. :)

applexx
2009-03-29, 08:54 PM
Look in the right upper corner of your post box, you will notice weighing scale, just click on it to increase reputation of person who posted. :)
That only shows reputation,no reputation power.my reputation power is 0..I didn't know why

Lesmana
2009-03-29, 11:19 PM
Please inform me how to find out the manufacturing date of SE Handsets. AS per david, I need to check the manufacturing date of SE K790i handsets to find out the CID .
Didn’t find anything at the back side where IMEI is normally written. I cant use SEtool to check the CID at the time of buying handsets.

Please tell me if there is any specific code i need to type in K790 handsets to watch the manufacturing date.(Like *#06# to check IMEI)

Thanks.














one easy option is,

look for mfg date, should be in or before Q1 2008,
CID 53 is from Q2 2008 and after.

BR
db

simri2god
2009-03-30, 01:39 AM
How to check date of phone.

Old Sony E******* K800 prototype

06W07=2006 week 7


http://img.techpowerup.org/090329/date.jpg (http://javascript<b></b>:SelectAndCopy('vbblink'))

Lesmana
2009-03-30, 03:51 AM
Thanks a lot simri...

I have already bought a K790i_made in Malaysia..as per your instruction i found the mfg date: 07W13.. It means before Q1, 2008..so it will be CID52 as per david. But by using SEtool i got the phone is CID 49 and i'm trying to convert the phone from CID49 to CID 52 by using a script...but whenevr i try to do so, the operation is failed...dont know why...i have talked to a SE handsets expert in our local market and he said it might be a problem related to GDFS. He cant give me any solution.

Please reply anyone how its possible to convert the handset into CID52.
Or is there any other solution to activate TEMS in my k790i handset without converting the CID?

Thanks

simri2god
2009-03-30, 04:52 AM
CID upgrade (DB2020)

Here is TAC (first 6-digit of IMEI) which allowed for CID upgrade (DB2020 CID49/51 to CID52).

R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs

35170701
35170801
35170901
35171001
35194101
35194201
35194301
35220601
35220701
35220801
35240101
35282601
35283601
35283701
35306501
35306601
35342701
35381301
35399601
35457901
35462501
35462601
35463701
35463801
35463901
35464801
35464901
35471601
35489301
35489401
35491101
35536301
35570401
35578501
35601901
35665701
35665801
35715401
35731501
35851601

DB2020_CID49_51_to_CID52.txt

35170901
35171001
35381301
35463701
35194301
35194201
35399601
35170801
35342701
35170701
35471601
35220601
35220801
35283601
35283701
35194101
35463901
35282601
35240101
35536301
35306601
35462501
35306501
35462601
35464901
35464801

DB2020_CID49_51_to_CID52_OLD.txt

35170701
35170801
35342701
35399601
35471601
35570401
35220601
35220801
35170901
35171001
35381301
35463701
35194201
35194101
35463901
35283601
35283701
35194301
35306601
35462501
35306501
35462601
35240101
35282601
35536301
35457901
35464901
35464801
35489301
35491101
35306501

samershahin
2009-03-30, 12:17 PM
can any one provide me with k800i script or calculator to keep calibration data of retail phones as it is....

@david
does your method affect the calibration data and results deeply?????
do u know is there any method to calibrate?????????

siborjong
2009-03-30, 02:48 PM
CID upgrade (DB2020)

Here is TAC (first 6-digit of IMEI) which allowed for CID upgrade (DB2020 CID49/51 to CID52).

R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs

35170701
35170801
35170901
35171001
35194101
35194201
35194301
35220601
35220701
35220801
35240101
35282601
35283601
35283701
35306501
35306601
35342701
35381301
35399601
35457901
35462501
35462601
35463701
35463801
35463901
35464801
35464901
35471601
35489301
35489401
35491101
35536301
35570401
35578501
35601901
35665701
35665801
35715401
35731501
35851601

DB2020_CID49_51_to_CID52.txt

35170901
35171001
35381301
35463701
35194301
35194201
35399601
35170801
35342701
35170701
35471601
35220601
35220801
35283601
35283701
35194101
35463901
35282601
35240101
35536301
35306601
35462501
35306501
35462601
35464901
35464801

DB2020_CID49_51_to_CID52_OLD.txt

35170701
35170801
35342701
35399601
35471601
35570401
35220601
35220801
35170901
35171001
35381301
35463701
35194201
35194101
35463901
35283601
35283701
35194301
35306601
35462501
35306501
35462601
35240101
35282601
35536301
35457901
35464901
35464801
35489301
35491101
35306501


Your method too complicated, use this (http://phonexs.com/)tools to upgrade your CID.
That tools not need script, just attach your SE phone and that's tools can be automatic upgrade your SE phone :)

Lesmana
2009-03-30, 07:50 PM
Thanks Guys..I need to know one more thing...

Before flashing TEMS firmware/CID convertion, do i need to make full charged of my handset ? My handset is K790i_CID 49, i have TEMS R2M Firmware of CID49 of K790i...

So do i need to convert the CID of my phone to activate tems?
whenevr i try to flash the handset, it shows failed related to Binary....

Please reply..i'm waiting..

Thanks.

simri2god
2009-03-30, 08:17 PM
You need CID convertion to CID52 to use bypass DB2020 securit on SETool lite to allow flash any CID and color, (TEMS firmware is CID49 brown) normal you can only flash firmware whit same CID and color as phone.

vcuavas
2009-03-30, 11:03 PM
thanks so much for your colaboration

samershahin
2009-03-31, 08:14 AM
TEMS_K790_license_reader.txt


gdfsread:00000585


TEMS_K800_license_reader.txt


gdfsread:00000585
gdfsread:00000128
gdfsread:00000129
gdfsread:0000012A
gdfsread:0000012B
gdfsread:0000012C
gdfsread:0000012D
gdfsread:0000012E
gdfsread:0000012F
gdfsread:00000130
gdfsread:00000131
gdfsread:00000132
gdfsread:00000133
gdfsread:00000134
gdfsread:00000135
gdfsread:00000136
gdfsread:00000137
gdfsread:00000138
gdfsread:00000139
gdfsread:0000013A
gdfsread:0000013B
gdfsread:0000013C
gdfsread:0000013D
gdfsread:0000013E
gdfsread:0000013F
gdfsread:00000140
gdfsread:00000141
gdfsread:00000142
gdfsread:00000143
gdfsread:00000144
gdfsread:00000145
gdfsread:00000146
gdfsread:00000147
gdfsread:00000148
gdfsread:00000149
gdfsread:0000014A
gdfsread:0000014B
gdfsread:0000014C
gdfsread:0000014D
gdfsread:0000014E
gdfsread:0000014F
gdfsread:00000150
gdfsread:00000151
gdfsread:00000152
gdfsread:00000153
gdfsread:00000154
gdfsread:00000155
gdfsread:00000156
gdfsread:00000157
gdfsread:00000158
gdfsread:00000159
gdfsread:0000015A
gdfsread:0000015B
gdfsread:0000015C
gdfsread:0000015D
gdfsread:0000015E
gdfsread:0000015F
gdfsread:00000160
gdfsread:00000161
gdfsread:00000162
gdfsread:00000163
gdfsread:00000202
gdfsread:00000203
gdfsread:00000204
gdfsread:00000205
gdfsread:00000206
gdfsread:00000207
gdfsread:00000208
gdfsread:00000209


Warning if you use k800 activation radio calibration values is overwritten.
if you write back original calibration you get invalid license.

please can u describe how to do this in step by step , for k800i???

Lesmana
2009-03-31, 09:43 AM
my phone is CID 49 and the firmware is CID 49...so dont i need to convert the CID?
whenevr i tried to flash the firmware it failed and here comes an error message-

Binary acknowledge failed with:68
...
...
Binary acknowledge failed with:89
...
Binary acknowledge failed with:02...

What is the problem...pls. explain...and the solution.

Thanks





You need CID convertion to CID52 to use bypass DB2020 securit on SETool lite to allow flash any CID and color, (TEMS firmware is CID49 brown) normal you can only flash firmware whit same CID and color as phone.

liu_wj
2009-03-31, 10:03 PM
can someone upload the tems GDFS for K790i on Rapidshare, 4shared or megaupload and share the link ,thanks!

davidbrayan
2009-03-31, 11:21 PM
GDFS rewrite cant be used to activate licenses in K800,
for that you need script, if you use GDFS rewrite methode, you'll get a normal phone after whole process.
license is in GDFS area and attached to GDFS, writing back normal GDFS reverts it back to normal.

yes, there is a methode to callibrate but its too complicatied.

BR
db


can any one provide me with k800i script or calculator to keep calibration data of retail phones as it is....

@david
does your method affect the calibration data and results deeply?????
do u know is there any method to calibrate?????????

liu_wj
2009-03-31, 11:39 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david






I can not download this file ,can you upload the tems GDFS for K790i on Rapidshare, 4shared or megaupload and share the link ,thanks very much!

simri2god
2009-03-31, 11:51 PM
my phone is CID 49 and the firmware is CID 49...so dont i need to convert the CID?
whenevr i tried to flash the firmware it failed and here comes an error message-

Binary acknowledge failed with:68
...
...
Binary acknowledge failed with:89
...
Binary acknowledge failed with:02...

What is the problem...pls. explain...and the solution.

Thanks

Your Phone = CID 49 RED
TEMS Firmware = CID 49 BROWN

You must covert to CID 52 RED

Lesmana
2009-04-01, 01:27 AM
To Simri2god,

Sorry for not to understand clearly...
My handset is CID 49 RED....and i need to convert it to CID 52 RED.
Is it like that ? If yes...

How can i do this convertion?
After conversion, do i need to do any other things to flash TEMS firmware in my K790 handset?

One more thing...after doing the conversion, my phone will be CID 52 RED
But The TEMS firmware is CID 49 Brown. Still its not matching..

Thanks

simri2god
2009-04-01, 04:20 AM
To Simri2god,

Sorry for not to understand clearly...
My handset is CID 49 RED....and i need to convert it to CID 52 RED.
Is it like that ? If yes...

How can i do this convertion?
After conversion, do i need to do any other things to flash TEMS firmware in my K790 handset?

One more thing...after doing the conversion, my phone will be CID 52 RED
But The TEMS firmware is CID 49 Brown. Still its not matching..

Thanks



Sorry for not to understand clearly...
My handset is CID 49 RED....and i need to convert it to CID 52 RED.
Is it like that ? If yes...

Yes


How can i do this convertion?
Run SETool2 1.11 Lite
Select K790
Backup GDFS press [Read GDFS]
Check IMEI and use and use one of this script
http://www.finetopix.com/showpost.php?p=43815&postcount=81

Exempel 351708-01-xxxxxx-x = 35170801 = R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs

Add R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs to MISC files and press [Write SCRIPT]
After finish, Power on the phone and power off
Check CID [Identify] if CID 52 go to part 2 if CID 49 go use script DB2020_CID49_51_to_CID52.txt or DB2020_CID49_51_to_CID52_OLD.txt

Part 2
Add TEMS GDFS in MISC files and press [Write GDFS]
Add you backup GDFS in MISC files and press [Write GDFS]

Part 3
Add TEMS Firmware in Files
Check [x ]Bypass DB2020 security
press [FLASH]
........
Done


One more thing...after doing the conversion, my phone will be CID 52 RED
But The TEMS firmware is CID 49 Brown. Still its not matching..

This whay you most use Bypass DB2020 security and the only works on CID 52 RED if you use SETool Lite

samershahin
2009-04-01, 08:13 AM
GDFS rewrite cant be used to activate licenses in K800,
for that you need script, if you use GDFS rewrite methode, you'll get a normal phone after whole process.
license is in GDFS area and attached to GDFS, writing back normal GDFS reverts it back to normal.

yes, there is a methode to callibrate but its too complicatied.

BR
db

thank u for ur reply...
this script who can make it and what is its principles ?? is there a program we can use to read gdfs of k800i with tems..then try to figure out the puzzle.. so we make liscence.. how scripts are made for k800??? is there any point we can start searching from??? i hope u can help me in this!!!

simmus0300
2009-04-01, 11:58 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db



password is david

can you tell me step by step method how to make a simple k790I to tems k790.
I have not understood.

xManiac
2009-04-01, 02:39 PM
TEMS_K790_license_reader.txt


gdfsread:00000585


TEMS_K800_license_reader.txt


gdfsread:00000585
gdfsread:00000128
gdfsread:00000129
gdfsread:0000012A
gdfsread:0000012B
gdfsread:0000012C
gdfsread:0000012D
gdfsread:0000012E
gdfsread:0000012F
gdfsread:00000130
gdfsread:00000131
gdfsread:00000132
gdfsread:00000133
gdfsread:00000134
gdfsread:00000135
gdfsread:00000136
gdfsread:00000137
gdfsread:00000138
gdfsread:00000139
gdfsread:0000013A
gdfsread:0000013B
gdfsread:0000013C
gdfsread:0000013D
gdfsread:0000013E
gdfsread:0000013F
gdfsread:00000140
gdfsread:00000141
gdfsread:00000142
gdfsread:00000143
gdfsread:00000144
gdfsread:00000145
gdfsread:00000146
gdfsread:00000147
gdfsread:00000148
gdfsread:00000149
gdfsread:0000014A
gdfsread:0000014B
gdfsread:0000014C
gdfsread:0000014D
gdfsread:0000014E
gdfsread:0000014F
gdfsread:00000150
gdfsread:00000151
gdfsread:00000152
gdfsread:00000153
gdfsread:00000154
gdfsread:00000155
gdfsread:00000156
gdfsread:00000157
gdfsread:00000158
gdfsread:00000159
gdfsread:0000015A
gdfsread:0000015B
gdfsread:0000015C
gdfsread:0000015D
gdfsread:0000015E
gdfsread:0000015F
gdfsread:00000160
gdfsread:00000161
gdfsread:00000162
gdfsread:00000163
gdfsread:00000202
gdfsread:00000203
gdfsread:00000204
gdfsread:00000205
gdfsread:00000206
gdfsread:00000207
gdfsread:00000208
gdfsread:00000209


Warning if you use k800 activation radio calibration values is overwritten.
if you write back original calibration you get invalid license.


thanks,
can u plz upload it to 4shared

BR,

simri2god
2009-04-01, 02:56 PM
Part 1

http://img.techpowerup.org/090401/part1.jpg

Part 2

http://img.techpowerup.org/090401/part2.jpg

Part 3

http://img.techpowerup.org/090401/part3.jpg

Part 4

http://img.techpowerup.org/090401/part4.jpg

simri2god
2009-04-01, 02:58 PM
thanks,
can u plz upload it to 4shared

BR,

copy and past to txt file

vibs75
2009-04-01, 03:53 PM
Dear Simri2god,
Will this script which you have posted can activate the License in k800 without disturbing the calibration data,if no then please do you have the license activation without disturbing the calibration, kindly help.
rgds
vibs

http://www.finetopix.com/images/attach/txt.gifK800_TEMS_POCKET_GPS_Activation.txt (http://www.finetopix.com/attachment.php?attachmentid=3331&d=1237150707)

samershahin
2009-04-01, 03:59 PM
Your Phone = CID 49 RED
TEMS Firmware = CID 49 BROWN

You must covert to CID 52 RED

Is that also includes k800i or is there different upgrade required for CID in k800i??????

BR

samershahin
2009-04-01, 04:18 PM
Part 1

http://img.techpowerup.org/090401/part1.jpg

Part 2

http://img.techpowerup.org/090401/part2.jpg

Part 3

http://img.techpowerup.org/090401/part3.jpg

Part 4

http://img.techpowerup.org/090401/part4.jpg

is it valid for k800i?? if yes please can u show us how to in the same tutorial as above???? can u please include all filles in same post..
that would be great

BR

simri2god
2009-04-01, 04:33 PM
Is that also includes k800i or is there different upgrade required for CID in k800i??????

BR

no different

simri2god
2009-04-01, 04:36 PM
is it valid for k800i?? if yes please can u show us how to in the same tutorial as above???? can u please include all filles in same post..
that would be great

BR


Yes but not firmware files.

samershahin
2009-04-01, 04:42 PM
Yes but not firmware files.

firm ware files ... are they tems ssw files ?? i surfed the net and found many so i should change the firmware.... but what about Tems k800 activation???

am i going to have it fully working...

simri2god
2009-04-01, 07:38 PM
Same as ssw/software but im rename to *.mbn *.fbn if the file is uncrypted
(TEMS K800/K790 R2A=encrypted, can only be use on SETool full version)

Stardard:
MAIN=************.mbn
FS=************.fbn

liu_wj
2009-04-01, 11:47 PM
I can not download ,can someone upload the file of tems k790 script on Rapidshare, 4shared or megaupload and share the link ,thanks very much!
or can send to 007jie2002@163.com

http://www.finetopix.com/images/misc/progress.gif

xManiac
2009-04-01, 11:58 PM
CID upgrade (DB2020)

Here is TAC (first 6-digit of IMEI) which allowed for CID upgrade (DB2020 CID49/51 to CID52).

R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs

35170701
35170801
35170901
35171001
35194101
35194201
35194301
35220601
35220701
35220801
35240101
35282601
35283601
35283701
35306501
35306601
35342701
35381301
35399601
35457901
35462501
35462601
35463701
35463801
35463901
35464801
35464901
35471601
35489301
35489401
35491101
35536301
35570401
35578501
35601901
35665701
35665801
35715401
35731501
35851601

DB2020_CID49_51_to_CID52.txt

35170901
35171001
35381301
35463701
35194301
35194201
35399601
35170801
35342701
35170701
35471601
35220601
35220801
35283601
35283701
35194101
35463901
35282601
35240101
35536301
35306601
35462501
35306501
35462601
35464901
35464801

DB2020_CID49_51_to_CID52_OLD.txt

35170701
35170801
35342701
35399601
35471601
35570401
35220601
35220801
35170901
35171001
35381301
35463701
35194201
35194101
35463901
35283601
35283701
35194301
35306601
35462501
35306501
35462601
35240101
35282601
35536301
35457901
35464901
35464801
35489301
35491101
35306501

can u upload these scripts on 4sahred or megaupload, in compressed form

BR,

samershahin
2009-04-02, 04:05 PM
hi all,
yesterday i tried my version of tems 8.03 which i got from this forum ,(5 patched files, with reg file...etc any way) tried it with a real tems mobile from an operator here!!! the surprise was that the mobile didnt connect.

did any one really tried it before we get more headace trying to make retail phone work!!!!!!!!!!!!!!!!!!

for me it didnt work.. please can any one add his result here!!!! i think i need to have more reputation plz add
:p i think my trials need reputation..!!!

BR
Samer Shahin

mayank_shah
2009-04-02, 05:32 PM
Hi

It is connecting and working, Already Tested...

BR//

sonar_bangla
2009-04-02, 06:03 PM
please share my frnds if i could use w810i to activate tems in.....

liu_wj
2009-04-04, 09:17 PM
I can not download ,can someone upload the file of tems k790 script on Rapidshare, 4shared or megaupload and share the link ,thanks very much!
or can send to 007jie2002@163.com

rickymartin28
2009-04-06, 02:43 PM
Sony-E******* USB Drivers All-In-One

Hi

I have collection of USB drivers for SE:

USB Flash Driver
http://rapidshare.com/files/12463934...ash_Driver.zip


K790 http://rapidshare.com/files/124638275/K790.zip
K800 http://rapidshare.com/files/124638348/K800.zip
All-In-One http://rapidshare.com/files/124633809/SE_Drivers.zip


thanks

Ricky

rickymartin28
2009-04-06, 02:44 PM
I can not download ,can someone upload the file of tems k790 script on Rapidshare, 4shared or megaupload and share the link ,thanks very much!
or can send to 007jie2002@163.com
dear ,

if u want then add reputation and thanks in my account

Ricky

liu_wj
2009-04-06, 04:34 PM
dear rickymartin28:
I have add your reputation and thanks,can you send me tems k790 script ? my

E-mail 007jie2002@163.com ,thanks very much!

liu_wj
2009-04-06, 04:35 PM
dear ,

if u want then add reputation and thanks in my account

Ricky





dear rickymartin28:

I have add your reputation and thanks,can you send me tems k790 script ? my


E-mail 007jie2002@163.com ,thanks very much!

http://www.finetopix.com/images/misc/progress.gif

xManiac
2009-04-07, 05:31 AM
dear rickymartin28

I've added u to my reputation,
plz email me, my email address is dogar99pk@yahoo.com

BR,

xManiac

rickymartin28
2009-04-07, 04:48 PM
dear rickymartin28

I've added u to my reputation,
plz email me, my email address is dogar99pk@yahoo.com

BR,

xManiac
Dear,

i have mailed u the script in ur personal Id ,

Please check it.

Regds,
Ricky martin

rickymartin28
2009-04-07, 04:49 PM
dear rickymartin28:
I have add your reputation and thanks,can you send me tems k790 script ? my

E-mail 007jie2002@163.com ,thanks very much!
Dear,

i have mailed u the script in ur personal Id ,

Please check it.

Regds,
Ricky martin

xManiac
2009-04-07, 05:18 PM
Thnks rickymatrin28,

but its password protected,

rickymartin28
2009-04-07, 05:21 PM
Thnks rickymatrin28,

but its password protected,
Dear Friend,

For password you have to add reputation in my account.

Thanks
Ricky

xManiac
2009-04-07, 06:25 PM
I've already added reputation to your account,

Cant anymore today

rickymartin28
2009-04-07, 08:44 PM
I've already added reputation to your account,

Cant anymore today
Sorry Bro,

If u have added in my account then why it is not showing my account

when it will show i will give u the password.


Regards,
Ricky martin

liu_wj
2009-04-07, 09:38 PM
Dear,

i have mailed u the script in ur personal Id ,

Please check it.

Regds,
Ricky martin



dear rickymartin28:
I have add thanks to you,but I am sorry that i can not add your reputation ,because i have not competence now, please forgive me!

Can you give me the password,thanks very much!

rickymartin28
2009-04-07, 10:24 PM
dear rickymartin28:
I have add thanks to you,but I am sorry that i can not add your reputation ,because i have not competence now, please forgive me!

Can you give me the password,thanks very much!
sorry Bro,

Without reputation no password.

zphdt
2009-04-09, 06:43 PM
thank u ,but i can't download,

fotondiamond
2009-04-09, 06:46 PM
Thank you , it is good project;
BR//

xManiac
2009-04-13, 12:23 AM
hello simri2god

can u e-mail me the activation script

My e-mail ID is dogar99pk@yahoo.com

cuixiaobin
2009-04-13, 07:31 PM
I have tems k790 firmware as .ssw format.
what's the difference betwwwn .ssw and .mbn?

xManiac
2009-04-16, 01:28 AM
hello simri2god

can u post "R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs"
and
R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs.txt DB2020_CID49_51_to_CID52.txt
DB2020_CID49_51_to_CID52_OLD.txt

on 4shared or canu e-mail them to me.

My Email Id is dogar99pk@yahoo.com

simri2god
2009-04-16, 02:24 AM
I have tems k790 firmware as .ssw format.
what's the difference betwwwn .ssw and .mbn?

Some ssw is encrypted and can only be used with setool2
exempel TEMS k800 R2A.

mbn (MAIN) is uncrypted can be used by setool lite, setool2, Cruiser, XS m.m

fbn (FS) is uncrypted can be used by setool lite, setool2, Cruiser, XS m.m

How to check:
add xxxxxxxxxxxxx.ssw to rar file open rar file with WinRAR and select file use Viwe button, if show CrYpTv12 at beginning/start the file is encrypted and can only be used with setool "full version"

This possible to see by size.

Im use hexeditor to check CID, color, CXC, (don't ask me how)





CrYpTv12Ö-U?SÔÎ
G?Ö?òΪ?7Ç?Ô?X?Ïó['HAÔt??xZ?ì?ê?Ÿ|ä+Ir{ÀÿÄ{Æ



hello simri2god

can u post "R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs"
and
R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs.txt DB2020_CID49_51_to_CID52.txt
DB2020_CID49_51_to_CID52_OLD.txt

on 4shared or canu e-mail them to me.

My Email Id is dogar99pk@yahoo.com

check you e-mail

aaofik
2009-04-16, 08:21 PM
anyone able to post it in other server as rapidshare or other?? please, thx.

xManiac
2009-04-17, 02:54 PM
thanks davidbrayan and simri2god

i followed ur procedure and My TEMS phone is working fine.

BR,

xManiac
2009-04-17, 02:57 PM
how can i activate the Pocket GPS on K790i

sonar_bangla
2009-04-17, 03:44 PM
thanks davidbrayan and simri2god

i followed ur procedure and My TEMS phone is working fine.

BR,

dear frnd, could you please send me the procedure of tems making with required tools/files..
please i need tems phone k790..
or need to buy

xManiac
2009-04-17, 04:59 PM
U need SEtool2 1.11 here is the process i followed

http://www.finetopix.com/showthread.php?t=2073&page=5

and the firmware are here.

http://www.finetopix.com/showthread.php?t=146&page=12

remember to add thanks and reputation to my account

xManiac
2009-04-17, 06:53 PM
Hello Simri2god

Quote:
Originally Posted by vibs75
Dear Shahram,
After putting GDFS , is there any other step to activate TEMS pocket etc, Script etc, as i am able to see TEMS on my k790i but not not able to connect to 8.03, please guide.

Rgds
vibs
You need to use TEMS driver for the phone.

K790/K800
http://rapidshare.com/files/20956695...ivers.zip.html
this link is not working,

can someone upload the K790 TEMS driver to connect TEMS investigation 8.0.3. or 8.0.4.

and I also need the registry and vusb.exe for TEMS 8.0.4 HASP HL Key.

qqhuang
2009-04-17, 11:04 PM
Very nice to visit this website,thanks anybody!

kadoel
2009-04-17, 11:36 PM
yes very nice, but i cant download attachment :(
I waiting for member

sonar_bangla
2009-04-18, 01:16 AM
Hello Simri2god

Quote:
Originally Posted by vibs75
Dear Shahram,
After putting GDFS , is there any other step to activate TEMS pocket etc, Script etc, as i am able to see TEMS on my k790i but not not able to connect to 8.03, please guide.

Rgds
vibs
You need to use TEMS driver for the phone.

K790/K800
http://rapidshare.com/files/20956695...ivers.zip.html
this link is not working,

can someone upload the K790 TEMS driver to connect TEMS investigation 8.0.3. or 8.0.4.

and I also need the registry and vusb.exe for TEMS 8.0.4 HASP HL Key.

hi frrnd X contact me rahimkhan99@yahoo.com

rickymartin28
2009-04-18, 03:55 PM
Dear friends Some useful links Originally Posted by jew2jew


Quote:
Originally Posted by jew2jew
TI6.0 install
467
TI7.1 install
468
TI8.0.3 install
http://rapidshare.com/files/61027457....0.3.part1.rar
http://rapidshare.com/files/58996907....0.3.part2.rar

Password TI8.0.3
Password: pwuef[oiqwjefoij
TI8.0.3 document

http://rapidshare.com/files/133057618/TEMS_8.03_doc.rar

TI8.2 install

http://rapidshare.com/files/12181622..._8.2.part1.rar
http://rapidshare.com/files/12173362..._8.2.part2.rar
TI8.2 document

http://rapidshare.com/files/122012858/T8.2.part1.rar
http://rapidshare.com/files/121985776/T8.2.part2.rar

TI9.0 install

http://rapidshare.com/files/132520995/TI_9.rar


TI9.0 Driver
http://rapidshare.com/files/13871812...ivers.rar.html


Password for TI 9 driver?

sonar_bangla
2009-04-19, 01:52 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david

hi david,
my frnd could you plse share vdo tutorial to make tems phone plse.

woodandpig
2009-04-19, 07:25 PM
Shahram

No, you can use common DCU-60 USB cable !


is it only for k790 ?

elche
2009-04-22, 09:23 AM
anybody know if it will work if used with a k790a?

rickymartin28
2009-04-22, 02:13 PM
tems pocket k790i 5.3 users manual


Regds,
Rickymartin28

rickymartin28
2009-04-22, 02:34 PM
Dear all,

here is the link for TI9 DRIVERS
with out any password.

http://www.megaupload.com/?d=I8T4081H

regds,

rickymartin28

deepakpatni
2009-04-22, 09:41 PM
Very helpful

elche
2009-04-24, 05:11 AM
answering my own question:

It works perfectly with k790a, also this method works only for k790 .

sonar_bangla
2009-05-10, 07:11 AM
hello my frnds, i cannot read gdfs from original k790, any one can help me, i used setool2kit1.11

sonar_bangla
2009-05-10, 07:14 AM
actually i cannot identify the phone

abc123
2009-05-10, 01:22 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david
Hi David
Do you have scrip fo full license with K800i for active TEM, POCKET and GPS.

Thanks

cun-xinh
2009-05-10, 01:32 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david
HI David.

Can you share full license for K800i with enable TEMS+POCKET+GPS and how to caculater it.

Thank you so much.

sonar_bangla
2009-05-10, 05:57 PM
Some ssw is encrypted and can only be used with setool2
exempel TEMS k800 R2A.

mbn (MAIN) is uncrypted can be used by setool lite, setool2, Cruiser, XS m.m

fbn (FS) is uncrypted can be used by setool lite, setool2, Cruiser, XS m.m

How to check:
add xxxxxxxxxxxxx.ssw to rar file open rar file with WinRAR and select file use Viwe button, if show CrYpTv12 at beginning/start the file is encrypted and can only be used with setool "full version"

This possible to see by size.

Im use hexeditor to check CID, color, CXC, (don't ask me how)





CrYpTv12Ö-U?SÔÎ
G?Ö?òΪ?7Ç?Ô?X?Ïó['HAÔt??xZ?ì?ê?Ÿ|ä+Ir{ÀÿÄ{Æ




check you e-mail
my frnd can u post or send email
"R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs"
and
R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs.txt DB2020_CID49_51_to_CID52.txt
DB2020_CID49_51_to_CID52_OLD.txt

rahimkhan99@yahoo.com

sonar_bangla
2009-05-10, 05:59 PM
thanks davidbrayan and simri2god

i followed ur procedure and My TEMS phone is working fine.

BR,

hi X
could you plse share me hu to make tems phone with all tools and sof u hv, thanks, fyi, i added rep u
rahimkhan99@yahoo.com

simri2god
2009-05-10, 06:35 PM
my frnd can u post or send email
"R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs"
and
R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs.txt DB2020_CID49_51_to_CID52.txt
DB2020_CID49_51_to_CID52_OLD.txt

rahimkhan99@yahoo.com

Use Google or 4shared.com (Search)

http://www.google.com/search?hl=en&q=R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs&meta=&aq=f&oq=

http://www.4shared.com/network/search.jsp?searchmode=2&searchName=R3A_DB2020_CROD_CID_49___51_to_CID52_Red.gdfs.gdfs

adika
2009-05-10, 07:34 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


Hi ! What means exactly "to activate GPS" on K790 or K800 ?
This handsets do not contain GPS receiver (conform manufacturer specifications).
Then how is possible to activate it ?
Or you activate one connection to an external bluetooth GPS receiver ?

BR

simri2god
2009-05-10, 10:18 PM
Hi ! What means exactly "to activate GPS" on K790 or K800 ?
This handsets do not contain GPS receiver (conform manufacturer specifications).
Then how is possible to activate it ?
Or you activate one connection to an external bluetooth GPS receiver ?

BR

TEMS K800 Connected to GPS-BT55S via Bluetooth
http://www.finetopix.com/showpost.php?p=47162&postcount=16 (http://www.finetopix.com/showpost.php?p=47162&postcount=16)

GPS-BT55S
http://www.teknikmagasinet.se/prod/produktinfo/590174.pdf (http://www.teknikmagasinet.se/prod/produktinfo/590174.pdf)

cun-xinh
2009-05-11, 03:47 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david
Hi David,

Could you send to me the TEMS GDFS via email, because I awating become member, so I don't know when I can become member,please send it.

Thanks a lot!

cun-xinh
2009-05-11, 03:48 AM
my email: giang.ngtr@gmail.com

Please send it via my email.

Thank u so much

simmus0300
2009-05-11, 11:41 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david

Dear all of u, I have sony e******* k790i mobile phone which shows tems logo after start on. i use this mobile for drive test using tems investigation ver 8. but i do not find tems pocket s/w in it. How to find tems pocket s/w in this mobile set or how to install tems pocket s/w step by step in it without causing any damage to mobile set.

siborjong
2009-05-11, 01:49 PM
Use my GDFS:

GDFS_TEMS_k790i.rar (http://www.4shared.com/file/91445942/34be19a9/GDFS_TEMS_k790i.html)


don't forget to use david brayan method :D

sonar_bangla
2009-05-11, 05:07 PM
Use my GDFS:

GDFS_TEMS_k790i.rar (http://www.4shared.com/file/91445942/34be19a9/GDFS_TEMS_k790i.html)


don't forget to use david brayan method :D

but my frnd , i cannot identify my phone by setool2lite v1.11, plse let me know which tools used and how
thanks inavdanced...
rahimkhan99@yahoo.com

simri2god
2009-05-11, 05:58 PM
If connect via (c) dont work connect via BOOTROM mode (2+5)

siborjong
2009-05-12, 04:27 AM
watch this video : http://setool.net/video/index.php

netscape
2009-05-13, 07:31 PM
in K800 there are 3 Firmware: R1B, R2B, R2A. Which is the best firmware?and what difference ?

iscom
2009-05-13, 08:27 PM
R2B is the most recent.

iscom
2009-05-13, 08:29 PM
Do you know if K800 handet HW supports the K790 SW??.

netscape
2009-05-13, 09:32 PM
Do you know if K800 handet HW supports the K790 SW??.

i think firmware of K790 can not flash on HW K800.
u should find FW K800.

adika
2009-05-15, 06:05 PM
For backing up (old) and flashing (new) GDFS you can use setool2light
here is the link
http://www.4shared.com/file/93024388/4ebbfb97/SEtool2Lite108.html
/*there is no password and any download limitations*/

BR

Hi !
I never used setool... but i have good microcontroller background :)
Need i also setool box (dongle) for setool2Lite, or is working alone ?
Or for some operations i need dongle for others i do not need ?
Thanks !

simri2god
2009-05-15, 07:41 PM
Hi !
I never used setool... but i have good microcontroller background :)
Need i also setool box (dongle) for setool2Lite, or is working alone ?
Or for some operations i need dongle for others i do not need ?
Thanks !

that is 2 version:

SETool2 Lite, free version, connect via std USB cabel.

SETool2 full version cost ~100-150 euro, has more function as CID53 crossflash, Testpoint (make the phone brown), and more.
use smartcard dongle (Cyberflex Access e-gate) box is optional.
Latest SETool2 Lite is SETool2 Lite v1.11

adika
2009-05-15, 09:57 PM
that is 2 version:

SETool2 Lite, free version, connect via std USB cabel.

SETool2 full version cost ~100-150 euro, has more function as CID53 crossflash, Testpoint (make the phone brown), and more.
use smartcard dongle (Cyberflex Access e-gate) box is optional.
Latest SETool2 Lite is SETool2 Lite v1.11

Understood !
Can i flash cripted files (*.ssw) with setool2Lite ?
Thanks !

simri2god
2009-05-15, 10:38 PM
Understood !
Can i flash cripted files (*.ssw) with setool2Lite ?
Thanks !

Depends if the file begin /start with CrYpTv12 = Encrypted = No

How to check:
Open or add the file to rar, and open with WinRAR and use View button.
You can use Hexeditor to View

Encrypted
http://img.techpowerup.org/090515/check_1.jpg (http://img.techpowerup.org/090515/check_1.jpg)
http://img.techpowerup.org/090515/check_2.jpg (http://img.techpowerup.org/090515/check_2.jpg)

Normal uncrypted BABE flash file
http://img.techpowerup.org/090515/check_3.jpg (http://img.techpowerup.org/090515/check_3.jpg)
http://img.techpowerup.org/090515/check_4.jpg (http://javascript<b></b>:SelectAndCopy('imgurl'))

adika
2009-05-16, 02:44 AM
Depends if the file begin /start with CrYpTv12 = Encrypted = No


You can use Hexeditor to View



Normal uncrypted BABE flash file
http://img.techpowerup.org/090515/check_3.jpg (http://img.techpowerup.org/090515/check_3.jpg)
[

Understood ! Not all *.ssw files are encrypted !
In order to use the encrypted files with setool2lite (i have not dongle), how can i decrypt the files ?
I must send the files to one which has setool dongle, he write the files in one phone and read back decrypted ?

Tnx !

simri2god
2009-05-16, 03:45 AM
Understood ! Not all *.ssw files are encrypted !
In order to use the encrypted files with setool2lite (i have not dongle), how can i decrypt the files ?
I must send the files to one which has setool dongle, he write the files in one phone and read back decrypted ?

Tnx !


Not all *.ssw files are encrypted ! Yes correct.

In order to use the encrypted files with setool2lite (i have not dongle), how can i decrypt the files ? No

I must send the files to one which has setool dongle, he write the files in one phone and read back decrypted ? No dont works.

Only on brown phones read flash is supported.

Lesmana
2009-05-16, 05:28 AM
but my frnd , i cannot identify my phone by setool2lite v1.11, plse let me know which tools used and how
thanks inavdanced...
rahimkhan99@yahoo.com


What did u do in previous steps ?
or its a new phone ?
Is the phone working as a normal K790i or its dead?

lyzj2001
2009-05-19, 12:34 AM
It works well, thanks

adika
2009-05-19, 01:02 AM
Hi !
What customisation file needs tems on K800 ?
The flash process normally needs tems main, tems fs. What about custom file(s) ?

Finally i cought one K800 ! I read out the gdfs first with Setool2Lite and after with XS++. The two files not match... They are in the files two bytes who are different. Why ? This is normal ?

adika
2009-05-19, 01:34 AM
I forgot to ask !
K800 with the Tems flash files is working also in 3G with Tems investigation ?
And in Tems pocket mode ?

Thanks !

netscape
2009-05-26, 12:19 AM
hi there.
I have k790i CID 52. I flash it with tems firmware R2B but in the end of procedure flash, error appear:
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:413 secs.
Wrong to flash into my K790.
Plz help me.
P/S: I've test OK connection between phone and PC because when i reflash with file CID 52, it work on.

simri2god
2009-05-26, 01:30 AM
hi there.
I have k790i CID 52. I flash it with tems firmware R2B but in the end of procedure flash, error appear:
Trying to launch embedded bootloader...
embedded flashloader not responds !
Elapsed:413 secs.
Wrong to flash into my K790.
Plz help me.
P/S: I've test OK connection between phone and PC because when i reflash with file CID 52, it work on.

How do you connect phone? Only connect via c button, don't use 2+5 button (BOOTROM) and alternative security bypass.

netscape
2009-05-26, 10:08 AM
thank you, yes, I connect PC with press & hold C, not BOTTROM (2+5). I tried both SETOOL Full (setool 3) and SEtool Lite 1.11 (Alternative Secirity Bypass) but it's not work. PLZ help me.

simri2god
2009-05-26, 08:40 PM
thank you, yes, I connect PC with press & hold C, not BOTTROM (2+5). I tried both SETOOL Full (setool 3) and SEtool Lite 1.11 (Alternative Secirity Bypass) but it's not work. PLZ help me.

SETool lite:

Part 1
Select phone type K790 or K800
Flash normal firmware (CID52) MAIN+FS ... dont use Bypass DB2020 security.
Flash

Power on the phone and wait ... power off.

Part 2
Select phone type K790 or K800
Check [x]Bypass DB2020 security
Add TEMS MAIN+FS
Flash

moh_sulaiman
2009-05-28, 12:01 AM
HI,
Thanks for sharing can kindly upload it again as it is expired

Thanks

Mohammad Sulaiman

netscape
2009-06-13, 12:27 AM
thanks simri2god.

ipoenk
2009-06-16, 02:39 AM
TEMS_K790_license_reader.txt


gdfsread:00000585


TEMS_K800_license_reader.txt


gdfsread:00000585
gdfsread:00000128
gdfsread:00000129
gdfsread:0000012A
gdfsread:0000012B
gdfsread:0000012C
gdfsread:0000012D
gdfsread:0000012E
gdfsread:0000012F
gdfsread:00000130
gdfsread:00000131
gdfsread:00000132
gdfsread:00000133
gdfsread:00000134
gdfsread:00000135
gdfsread:00000136
gdfsread:00000137
gdfsread:00000138
gdfsread:00000139
gdfsread:0000013A
gdfsread:0000013B
gdfsread:0000013C
gdfsread:0000013D
gdfsread:0000013E
gdfsread:0000013F
gdfsread:00000140
gdfsread:00000141
gdfsread:00000142
gdfsread:00000143
gdfsread:00000144
gdfsread:00000145
gdfsread:00000146
gdfsread:00000147
gdfsread:00000148
gdfsread:00000149
gdfsread:0000014A
gdfsread:0000014B
gdfsread:0000014C
gdfsread:0000014D
gdfsread:0000014E
gdfsread:0000014F
gdfsread:00000150
gdfsread:00000151
gdfsread:00000152
gdfsread:00000153
gdfsread:00000154
gdfsread:00000155
gdfsread:00000156
gdfsread:00000157
gdfsread:00000158
gdfsread:00000159
gdfsread:0000015A
gdfsread:0000015B
gdfsread:0000015C
gdfsread:0000015D
gdfsread:0000015E
gdfsread:0000015F
gdfsread:00000160
gdfsread:00000161
gdfsread:00000162
gdfsread:00000163
gdfsread:00000202
gdfsread:00000203
gdfsread:00000204
gdfsread:00000205
gdfsread:00000206
gdfsread:00000207
gdfsread:00000208
gdfsread:00000209


Warning if you use this K800 activation radio calibration values is overwritten.
if you write back original calibration you get invalid license.

Sorry can i get it in 4shared

thanks master

ipoenk
2009-06-16, 03:15 AM
sorry does anyone sell tems license in here?
please contact me

thank

dzt5037
2009-06-17, 10:25 AM
yes , its tested.
dont worry.
just keep your original GDFS and do anything.

BR
db
Thanks:p:p

anshul7312
2009-06-17, 04:24 PM
Originally Posted by davidbrayan
yes , its tested.
dont worry.
just keep your original GDFS and do anything.

BR
db

Thanks...

deadfish
2009-06-27, 07:44 PM
than this is clone phone!

rickymartin28
2009-06-29, 11:26 PM
I have cloned orignal k790i CID 49,51,52 to tems k790i. But not able to orignal k790i CID 53 can anybody tell howto change CID 53 into CID 52.

Please help me???????

ipoenk
2009-06-30, 08:35 AM
I have cloned orignal k790i CID 49,51,52 to tems k790i. But not able to orignal k790i CID 53 can anybody tell howto change CID 53 into CID 52.

Please help me???????


If You Want To Change Your CID You Can Use Ultimate Unlocker, But You Can Flashing Whithout change Your CID With "Cross CID Flashing " By Enable Your Security Bypass

deadfish
2009-06-30, 05:02 PM
:(:(:(
my k790 is brown phone,the CID is 49,and I can't backup the GDFS!

15:57:01| XS++ v3.2 Dev1 (Crystal) Ready !
15:57:01| Executed on Microsoft Windows XP
15:57:07|
15:57:07| Attempting to open the interface...
15:57:07|
15:57:07| TURN OFF PHONE!
15:57:07| Hold 'C' button on phone and connect phone NOW.
15:57:07| You have 30 seconds...
15:57:07|
15:57:12| Baseband ID: 9900
15:57:12| Protocol Version: 3.1
15:57:13| Phone name detected!
15:57:13|
15:57:13| Profiling SEMC phone...
15:57:13| Platform: DB2020
15:57:13| OTP CID: 49
15:57:13| EROM CID: 49
15:57:13| EROM Color: Brown
15:57:13| IMEI: 35220801xxxxxx
15:57:13| Phone ID: K790
15:57:13| Region: CHINA
15:57:13| CDA: CDA102568/101 R4A
15:57:13| Firmware Version: R8BF003
15:57:13| EROM: R3A011
15:57:13| Ready for operation!
15:57:20| User chose NOT to update EROM CID!
15:57:24|
15:57:24| Sending db2020_cid01_prodid_p3j.bin...
15:57:24| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
15:57:24| This is a PRODUCTION_ID loader
15:57:24|
15:57:24| Sending db2020_mem_patcher_cid49_r2a006.bin...
15:57:24| Header: Error 0x10
15:57:25|
15:57:25| Sending db2020_red49_cs_r3a009.bin...
15:57:25| Binary acknowledge failed with: 89
15:57:25| Command: Error 0x89

who can help me change the color brown to red and the CID49 to CID52 and flash the tems k790?

parto_tegal
2009-06-30, 06:15 PM
:(:(:(
my k790 is brown phone,the CID is 49,and I can't backup the GDFS!

15:57:01| XS++ v3.2 Dev1 (Crystal) Ready !
15:57:01| Executed on Microsoft Windows XP
15:57:07|
15:57:07| Attempting to open the interface...
15:57:07|
15:57:07| TURN OFF PHONE!
15:57:07| Hold 'C' button on phone and connect phone NOW.
15:57:07| You have 30 seconds...
15:57:07|
15:57:12| Baseband ID: 9900
15:57:12| Protocol Version: 3.1
15:57:13| Phone name detected!
15:57:13|
15:57:13| Profiling SEMC phone...
15:57:13| Platform: DB2020
15:57:13| OTP CID: 49
15:57:13| EROM CID: 49
15:57:13| EROM Color: Brown
15:57:13| IMEI: 35220801xxxxxx
15:57:13| Phone ID: K790
15:57:13| Region: CHINA
15:57:13| CDA: CDA102568/101 R4A
15:57:13| Firmware Version: R8BF003
15:57:13| EROM: R3A011
15:57:13| Ready for operation!
15:57:20| User chose NOT to update EROM CID!
15:57:24|
15:57:24| Sending db2020_cid01_prodid_p3j.bin...
15:57:24| Applet ID: 070129 0950 NGUCXC1250330_DB2020_PRODUCTIONIDLOADER_P3J
15:57:24| This is a PRODUCTION_ID loader
15:57:24|
15:57:24| Sending db2020_mem_patcher_cid49_r2a006.bin...
15:57:24| Header: Error 0x10
15:57:25|
15:57:25| Sending db2020_red49_cs_r3a009.bin...
15:57:25| Binary acknowledge failed with: 89
15:57:25| Command: Error 0x89

who can help me change the color brown to red and the CID49 to CID52 and flash the tems k790?

Hi
CID49 Brown need Empty Fill procedure with SETool2g to make it RED, go to their Support Site and read FAQ... Just FYI: original TEMS phone having CID49 BROWN hvakakaka..... :D
Regards
parto_tegal

xManiac
2009-06-30, 06:58 PM
SETool lite:

Part 1
Select phone type K790 or K800
Flash normal firmware (CID52) MAIN+FS ... dont use Bypass DB2020 security.
Flash

Power on the phone and wait ... power off.

Part 2
Select phone type K790 or K800
Check [x]Bypass DB2020 security
Add TEMS MAIN+FS
Flash

Hello Simro2god,
I have a question for u?
I've flashed my K790 with R1B TEMS firmware. the question is Does TEMS Investigation 8.0.3 supports R1B firmware. because it didn't detect my phone.
I've manually added the equipment, assigned the ports to data cable and Mobile phone, followed the procedure of david but no use.
What should I do now

simri2god
2009-06-30, 07:31 PM
Presse on Red selected button [ ] "Connect all"
http://img.techpowerup.org/090630/TI_9.0.3.jpg (http://img.techpowerup.org/090630/TI_9.0.3.jpg)

deadfish
2009-06-30, 07:55 PM
I have changed my k790 color brown to red yet,but when I change the CID49 to CID52 follow simri2god's tutorial,and nothing to change! who can help me.thanks!

xManiac
2009-06-30, 08:45 PM
Thanks simri2god

rickymartin28
2009-06-30, 10:39 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david
Der David,

Thanks for the method I have used yours method cloned orignal k790i CID 49,51,52 to tems k790i. But not able to orignal k790i CID 53 can please tell me how to change CID 53 into CID 52.

Please help me???????

GSM_Huawei
2009-06-30, 10:46 PM
convert CID 53 to CID 52 only use SETOOL BOX 3 , convert CID 52 with testpoint and log

rickymartin28
2009-06-30, 10:46 PM
I have changed my k790 color brown to red yet,but when I change the CID49 to CID52 follow simri2god's tutorial,and nothing to change! who can help me.thanks!
Dear friend ,

Download xs++ and you will be able to change this

Regds

rickymartin28
2009-06-30, 11:15 PM
convert CID 53 to CID 52 only use SETOOL BOX 3 , convert CID 52 with testpoint and log
Sir,

will u send me the tutrial for step by step installation for this

deadfish
2009-06-30, 11:19 PM
Dear friend ,

Download xs++ and you will be able to change this

Regds

I have already try this method,but is't Successful.because my EROM version is R3A022.

xManiac
2009-07-01, 12:44 AM
Thanks simri2god

1 more thing Simri2god

K790 supports GPS or not

if yes how can I enable GPS on it

simri2god
2009-07-01, 01:09 AM
1 more thing Simri2god

K790 supports GPS or not

if yes how can I enable GPS on it

Check in K790 if this option for GPS, if yes you can use external GPS via BT

deadfish
2009-07-01, 01:28 AM
:(:(:(:(

who can help me???????????????//

xiaoduirensheng
2009-07-02, 06:47 PM
Is it the full.......

lyzj2001
2009-07-11, 03:23 AM
:hug:
simri2god:

Could you send me the K790,K800 GPS activation script?
lyzjzzh@163.com
thank you very much

simri2god
2009-07-11, 04:34 AM
:hug:


simri2god:

Could you send me the K790,K800 GPS activation script?
lyzjzzh@163.com
thank you very much

Here:
ftp://217.35.130.50/TEMS/TEMS_Pocket/
ftp://217.35.130.50/TEMS/TEMS_Pocket/TEMS_Activation/


Next time use Search button.

lyzj2001
2009-07-12, 03:07 AM
thanks man,you are the best

woodandpig
2009-08-03, 12:10 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david

:(
I can't get it

leo.ashu
2009-08-10, 11:36 AM
The Passwd please....

gyb820703
2009-09-01, 07:04 PM
谢谢楼主!等我能下的时候我再来下!哪位刷机成功了?告诉下好吗?

x_xx6283
2009-11-30, 05:32 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db



password is david

i can not open the link for details,
the error: Please delete cookies and IE favorite. then click www.finetopix.com

minhvt
2009-12-19, 06:09 PM
Can't open the link.

Pls check.

thanks

e-gsmshop
2009-12-25, 07:08 AM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david
Thanks
BR

e-gsmshop

caizhongmou
2010-01-05, 03:50 PM
why i can't dowload the link,help mei

alekh
2010-01-06, 10:11 PM
Thanks
BR

e-gsmshop
Hi David !

Thanks for posting but If u don't mind can u describe me complete procedure to Make TEMS Phone using K790i or K800i.

e-gsmshop
2010-01-06, 10:16 PM
here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david
Please check your pm .
Thanks

e-gsmshop

anupam
2010-01-07, 10:37 PM
Please provide me help writing TEMS pocket firmware in k790i.

anupam
2010-01-07, 10:43 PM
I m not able to download the zip can anybody help.
I have done rest of the procedure for making k790i TEMS pocket phone
i m using SE3 Tool i only need the GDFS of real K790i phone.plz help me out i have lost my mobile during my job work, company is blaming me .I have to submit it back

alekh
2010-01-07, 10:55 PM
I m not able to download the zip can anybody help.
I have done rest of the procedure for making k790i TEMS pocket phone
i m using SE3 Tool i only need the GDFS of real K790i phone.plz help me out i have lost my mobile during my job work, company is blaming me .I have to submit it back


:D:D:D

@ Anupam

Wait for some time. I will soon help u out finding all d tems *****s.

alekh
2010-01-08, 07:29 PM
I m not able to download the zip can anybody help.
I have done rest of the procedure for making k790i TEMS pocket phone
i m using SE3 Tool i only need the GDFS of real K790i phone.plz help me out i have lost my mobile during my job work, company is blaming me .I have to submit it back
@ Anupam !

Waiting for ur PM.

Ajuba
2010-01-08, 07:47 PM
:D:D:D

@ Anupam

Wait for some time. I will soon help u out finding all d tems *****s.

hi there

I am not able to understand why I am not able to download these files....:mad:

veer010101
2010-01-08, 07:58 PM
@ Anupam !

Waiting for ur PM.

Thanks 4 ur suport

Ajuba
2010-01-08, 08:11 PM
Please tell me how to donload this file...????

alekh
2010-01-08, 08:14 PM
Please tell me how to donload this file...????
@ Veer

just mail me gdfs of ur retail se k790i. i will calculate tems GDFS for u.

alekh
2010-01-08, 08:15 PM
Please tell me how to donload this file...????
@ Ajuba

keep on trying !

Increase ur reputation to dl this file.

alekh
2010-01-08, 08:17 PM
Thanks 4 ur suport
increase no. of ur post ????

So ur presence buddy......

keep on trying....

u will learn here.....!

Ajuba
2010-01-08, 08:44 PM
increase no. of ur post ????

So ur presence buddy......

keep on trying....

u will learn here.....!

ya I am trying

Ajuba
2010-01-08, 08:45 PM
@ Veer

just mail me gdfs of ur retail se k790i. i will calculate tems GDFS for u.

ya sure thanks...

Ajuba
2010-01-08, 08:47 PM
@ Ajuba

keep on trying !

Increase ur reputation to dl this file.

ok thanks please you also help me...

guohonghz
2010-01-20, 09:45 PM
How can download this file

kotak
2010-01-23, 03:05 AM
Dear friend ,

Download xs++ and you will be able to change this

Regds

i,m allready download n connect the handset, and next what should i do?

khoibt
2010-01-27, 12:18 AM
@shahram

bro, do you have software to flashing t610, i have tried for looking div lpt dongle but not get it :(

I have div 8.4, my friend usually go to China, he can buy it, it very cheep!

khoibt
2010-01-27, 12:27 AM
TEMS_K790_license_reader.txt


gdfsread:00000585


TEMS_K800_license_reader.txt


gdfsread:00000585
gdfsread:00000128
gdfsread:00000129
gdfsread:0000012A
gdfsread:0000012B
gdfsread:0000012C
gdfsread:0000012D
gdfsread:0000012E
gdfsread:0000012F
gdfsread:00000130
gdfsread:00000131
gdfsread:00000132
gdfsread:00000133
gdfsread:00000134
gdfsread:00000135
gdfsread:00000136
gdfsread:00000137
gdfsread:00000138
gdfsread:00000139
gdfsread:0000013A
gdfsread:0000013B
gdfsread:0000013C
gdfsread:0000013D
gdfsread:0000013E
gdfsread:0000013F
gdfsread:00000140
gdfsread:00000141
gdfsread:00000142
gdfsread:00000143
gdfsread:00000144
gdfsread:00000145
gdfsread:00000146
gdfsread:00000147
gdfsread:00000148
gdfsread:00000149
gdfsread:0000014A
gdfsread:0000014B
gdfsread:0000014C
gdfsread:0000014D
gdfsread:0000014E
gdfsread:0000014F
gdfsread:00000150
gdfsread:00000151
gdfsread:00000152
gdfsread:00000153
gdfsread:00000154
gdfsread:00000155
gdfsread:00000156
gdfsread:00000157
gdfsread:00000158
gdfsread:00000159
gdfsread:0000015A
gdfsread:0000015B
gdfsread:0000015C
gdfsread:0000015D
gdfsread:0000015E
gdfsread:0000015F
gdfsread:00000160
gdfsread:00000161
gdfsread:00000162
gdfsread:00000163
gdfsread:00000202
gdfsread:00000203
gdfsread:00000204
gdfsread:00000205
gdfsread:00000206
gdfsread:00000207
gdfsread:00000208
gdfsread:00000209


Warning if you use this K800 activation radio calibration values is overwritten.
if you write back original calibration you get invalid license.

thank you so much!
Do you known the adress of license Tems C702?

kotak
2010-01-27, 03:05 PM
File Type: txt TEMS_K790_license_reader.txt (17 Bytes, 67 views)
File Type: txt TEMS_K800_license_reader.txt (1.3 KB, 57 views)
File Type: txt K790_TEMS_POCKET_GPS_Activation.txt (138 Bytes, 73 views)
File Type: txt K800_TEMS_POCKET_GPS_Activation.txt (8.4 KB, 95 views)

can some one give me the link for that script in to www.4sahred.com, cause i can,t download it, or just send me whit email at iwan0809@gmail.com

thanks

ridwanz80
2010-02-03, 03:25 AM
File Type: txt TEMS_K790_license_reader.txt (17 Bytes, 67 views)
File Type: txt TEMS_K800_license_reader.txt (1.3 KB, 57 views)
File Type: txt K790_TEMS_POCKET_GPS_Activation.txt (138 Bytes, 73 views)
File Type: txt K800_TEMS_POCKET_GPS_Activation.txt (8.4 KB, 95 views)

can some one give me the link for that script in to www.4sahred.com, cause i can,t download it, or just send me whit email at iwan0809@gmail.com

thanks
hihiihihi... wrong LINK :D
Cheers

zleizero
2010-02-17, 01:12 AM
http://http://www.finetopix.com/showthread.php?t=4641

Pritpalsingh
2010-02-17, 05:41 AM
QUOTE=davidbrayan;30768]here i am uploading a GDFS from TEMS K790i phone.
you can write it to your retail K790i flashed to TEMS firmware to activate TEMS,POCKET and GPS.


but before doing so, you must backup your phones GDFS as it will be required to write back to your phone once it is dead after writing this GDFS.

for more detail visit

http://www.finetopix.com/showthread.php?t=1949

BR
db

password is david[/QUOTE]

zleizero
2010-02-19, 03:22 AM
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

raj1200344
2010-02-19, 03:26 AM
tems for t610 is

http://www.seusers.com/forum/local_links.php?action=jump&catid=970&id=14451

raj1200344
2010-02-19, 03:27 AM
how i get tems for Sony e******* yari

raj1200344
2010-02-19, 03:27 AM
is there will be tems for satio

raj1200344
2010-02-19, 03:28 AM
i need techmode or tems for Aino

raj1200344
2010-02-19, 03:30 AM
i need techmode for w705.
how i get ?

raj1200344
2010-02-19, 03:31 AM
i need techmode for yari.
how i get it?

raj1200344
2010-02-19, 03:32 AM
plz tell me how i get netmonitor for c905

freakturd06
2010-04-07, 10:26 PM
here the link's

http://www.4shared.com/file/91445942/34be19a9/k790i.html

Don't forget to add my reputation :D

Thanks and reputation added. Please Pm me for passwords if there is any.

freakturd06
2010-04-08, 10:51 AM
You need to use TEMS driver for the phone.

K790/K800
http://rapidshare.com/files/209566956/TEMS_8.X.X_Drivers.zip.html

Please re upload in 4shared. Dead link. Thanks.

shak33
2010-04-10, 04:20 AM
thanks friend

zleizero
2010-04-12, 12:29 PM
download this attachment will cost you 5 points,are you
sure want to download it, i not download it.