PDA

View Full Version : Bad EcNo



egyman
2011-05-19, 10:45 PM
Dear guys
I'd like to know the reasons and solutions of Bad EcNo in UMTS system

jamalll2000
2011-05-21, 01:51 AM
Tilting.....the antenna.....:lol

sujarwo
2011-05-24, 01:44 AM
there 2 main reason :
1. bad RSCP (low coverage) - sol : increase power, adjust antenna tilt, add new site
2. pilot polution - sol : adjust antenna azimuth/tilt in interferer site

liukang
2011-05-24, 02:58 AM
Dear guys
I'd like to know the reasons and solutions of Bad EcNo in UMTS system
Reason maybe:
1. Poor coverage => check hardware (antenna, VSWR), Tx Power (NodeB), adjust til and azimuth, if to far NodeB maybe need add new NodeB.
2. Pilot Pollution => adjust downtil and azimuth
3. if EcNo in active set is bad, maybe neighbours missing. => addition more neighbour


Cheer!

adewijaya
2011-05-24, 07:27 AM
don't forget with parameter seting too

firstmaxim
2011-05-25, 02:05 AM
Dear guys
I'd like to know the reasons and solutions of Bad EcNo in UMTS system
Ec/Io = Ec/(Ior + Ioc)
Ior = Total power of cells seen by UE in active set
Ioc = Downlink Interference from cells not in active set

If we use downlink interference cancellation, one can reduce Ioc, and hence improve Ec/Io. And, then we have other optimization techniques of antenna tilts, etc to reduce interference.