PDA

View Full Version : ******** Canopy



arthenian11
2011-05-10, 09:09 PM
Hi Masters,

Im looking for ******** Canopy Commissioning procedure of AP and CMM.

Can somebody help me.....

Thanks in advance.....

bikplaboi
2011-07-29, 04:52 PM
Hi All,

I am new with Canopy Backhaul equipment and looking at setting up a simple ptp system in star Node topology configuration.

Here is basically what I have in mind.

My site which will be the centre of my star topology which I am calling
Site # 1 will have a PTP11800 150MB poin to point backhaul to Site # 2

My other sites # 3-5 will use a set of PTP250 each to link back to Site # 1.

My question is how can I or is it possible to use a switch to merge all the links coming from site # 3-5 and have the a single link bringing all the data traffic from these 3 sites to Site #2 through the PTP11800 link already setup between Site # 1 and 2.

How can I configure the switch or what other additional equipment do I need to do this. Please any help is much appreciated, I am RF engineer with GSM & WiMAX RF planing but just starting in MW planning and need help.


Thanks for all those who response..



bikplaboi...:):)




Im looking for ******** Canopy Commissioning procedure of AP and CMM.

Can somebody help me.....

Thanks in advance.....[/QUOTE]