PDA

View Full Version : mth800



flaffo
2011-04-25, 05:13 PM
Hi all,

Need some help to get my terminal back to life. At this moment the terminal will no't turn on. I think i have to place a new flash. how can i do that?
I have the MR5.11.3 and CPS.

Motorola
2011-04-25, 06:20 PM
Hi all,

Need some help to get my terminal back to life. At this moment the terminal will no't turn on. I think i have to place a new flash. how can i do that?
I have the MR5.11.3 and CPS.


If you do not have backup codeplug from this phone, you will have hard time to restore it to working order.

flaffo
2011-04-25, 06:56 PM
I have a back up of the codeplug. But the CPS I have will no't work on the MTH800. So i can't write it back. "Wrong codeplug version"

The CPS works fine on my MTP850 S

The main problem is that i can't turn the power on. I must power up before i can write to the terminal.

The terminal is no't stolen, it's brand new one TEA clear.

Motorola
2011-04-25, 08:09 PM
I have a back up of the codeplug. But the CPS I have will no't work on the MTH800. So i can't write it back. "Wrong codeplug version"

The CPS works fine on my MTP850 S

The main problem is that i can't turn the power on. I must power up before i can write to the terminal.

The terminal is no't stolen, it's brand new one TEA clear.


If you have Serial flash cable, press buttons 1+9 on keypad and connect cable to phone, try then to write to phone, if it fails , then you have boot sector damaged.

flaffo
2011-04-26, 01:20 AM
How can i repair the boot sector?

Motorola
2011-04-26, 01:25 AM
How can i repair the boot sector?


Need to have DEPOT or LAB CPS

flaffo
2011-04-26, 01:46 AM
Ok, Thank's ;)










The message you have entered is too short. Please lengthen your message to at least 16 characters.