forama
2011-02-25, 06:29 PM
Purpose of this document is to change parameters MGC_ORIG_PEND_LIMIT (2:1017) and MG_ORIG_PEND_LIMIT (2:1018) values to 6 (repeats the transaction request 6 times) and change Pending limits values to 6 already configurated the Virtual MGWs in the active packages. By default the value in PRFILE and in VMGW data is 4.
Table of Contents
1.Keywords
2.Summary
3. Detailed description
4. Solution / Instructions
4.1 Change the Virtual MGW configurations
4.1.1 Pending limits can be seen in the following parameters in VMGW data
4.1.2 De-register the VMGW
4.1.3 Modify the pending limit values
4.1.4 Check that the new values are updated
4.1.5 Register the VMGW
4.2 Change the PRFILE parameters
4.2.1 Check the original parameter values
4.2.2 Change the parameter values to 6...
4.2.3 Check the changed parameter values
5. NOTE
6. EXAMPLE
Table of Contents
1.Keywords
2.Summary
3. Detailed description
4. Solution / Instructions
4.1 Change the Virtual MGW configurations
4.1.1 Pending limits can be seen in the following parameters in VMGW data
4.1.2 De-register the VMGW
4.1.3 Modify the pending limit values
4.1.4 Check that the new values are updated
4.1.5 Register the VMGW
4.2 Change the PRFILE parameters
4.2.1 Check the original parameter values
4.2.2 Change the parameter values to 6...
4.2.3 Check the changed parameter values
5. NOTE
6. EXAMPLE