PDA

View Full Version : IMEI - A2 empty board programming



uel888
2011-01-28, 02:29 AM
First , I would like to thanks gblues for his post.

I save this in pdf file. Maybe this is the only solution for OTP A2 IMEI change.

If you have some question then you can ask the author(gblues) and look for his thread. ;)

andrew
2011-01-28, 10:37 AM
otp chip in a2 tems model is glued with hard transparent glue which won't melt even with 450 degrees heat, you will fry the board instead.
and it is NOT an easy job even for technician with more than 10 years experience in mobile hardware repairing, the risk of killing the mobile is too big.
well, i've succeeded though, with lot of sweat in air-conned room :L

butaktelco
2011-01-29, 01:06 AM
Not easy remove glue & chips from board....can be destroy board
to put New IC is very hard, unless 10 chipset for 1 phone if board not damage

btw many shop selling IC AB3100 :D, not hard to get this chips