PDA

View Full Version : Emulator and Instruction of Sentinel vUSB


shahabmc
2008-09-25, 08:53 PM
Follow the steps below:

1. Dump dongle with PVA 3.3 util with out "Brute WP" selected.
2. Solve the DMP file using "f1_nodongle" (10x to cEnginEEr) util, you should get XXXX.SSP file (~100kb).
3. Use "UniDumpToReg" util to convert the SSP to REG. Inside"UniDumpToReg" select your SSP file and then select "SafeKey ssp ->vUSB Sentinel" option and push "GO".
4. Open the REG file in Notepad or any other text editor and make the following changes:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\Emulator\Sentinel\Dump\XXXX0000]

To

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\ru-board\mulators\Dump\XXXX0000]

"sntMemory"=hex:0A3E,1255,C5E3,0000,0009…..
To
"sntMemory"=hex:3E,0A,55,12,E3,C5,00,00,09,00… .. make this comma add and switch up to the end of this cell
5. Run "install.bat" from "vusbus" folder
6. Your machine should found new hardware and install it by it self
7. Import your changed REG in to the REGISTRY
8. Reboot

For the softwares which used send PM
zhjd
2008-09-25, 09:56 PM
no need reboot ,just change the step 7 to 5 .
enjoy every one .
clive
2008-09-26, 12:50 AM
Thanks for te tutorial
gsmmangi
2009-01-22, 11:21 AM
Finally someone decides to share some tips on how to work this SENTINEL dongle copy stuff.

I will try this out and if successfull will share the fruits (nemo outdoor & analyze with rest of the forum)





Follow the steps below:

1. **** dongle with PVA 3.3 util with out "Brute WP" selected.
2. Solve the DMP file using "f1_nodongle" (10x to cEnginEEr) util, you should get XXXX.SSP file (~100kb).
3. Use "Uni****ToReg" util to convert the SSP to REG. Inside"Uni****ToReg" select your SSP file and then select "SafeKey ssp ->vUSB Sentinel" option and push "GO".
4. Open the REG file in Notepad or any other text editor and make the following changes:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\********\Sentinel\****\XXXX0000]

To

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
\Services\ru-board\mulators\****\XXXX0000]

"sntMemory"=hex:0A3E,1255,C5E3,0000,0009…..
To
"sntMemory"=hex:3E,0A,55,12,E3,C5,00,00,09,00… .. make this comma add and switch up to the end of this cell
5. Run "install.bat" from "vusbus" folder
6. Your machine should found new hardware and install it by it self
7. Import your changed REG in to the REGISTRY
8. Reboot

For the softwares which used send PM
abc123ww
2009-07-01, 01:02 AM
Finally someone decides to share some tips on how to work this SENTINEL dongle copy stuff.

I will try this out and if successfull will share the fruits (nemo outdoor & analyze with rest of the forum)

Thank u.

BR