PDA

View Full Version : FSMB+FRGF



m121
2010-12-29, 09:50 PM
Hi, everybody!
We have a problem, that after launching site with FSMB+FRGF 3. sector doesn't come up. Cell_1 and Cell_2 are working fine but Cell_3 is degraded and doesn't work. Modules are fine, WBTS with FSME+FRGF is working fine.
Can somebody, please, advice, where could be the problem?

maasricht
2010-12-30, 04:05 AM
Hi, everybody!
We have a problem, that after launching site with FSMB+FRGF 3. sector doesn't come up. Cell_1 and Cell_2 are working fine but Cell_3 is degraded and doesn't work. Modules are fine, WBTS with FSME+FRGF is working fine.
Can somebody, please, advice, where could be the problem?

Please check first Licences.

1. Flexi WCDMA BTS 60W Power LK (3 pieces)
2.Flexi WCDMA BTS Branch Activation LK (3 pieces)

m121
2010-12-30, 04:29 AM
Thanks maasricht,

1. We have installed 3 40W power LK, we doesn't have 60w licences
2.Installed

maasricht
2010-12-30, 07:27 AM
Howmany FSMB used in your site?

m121
2010-12-30, 03:50 PM
Only one.
One FSMB and one FRGF.
WBTS planned with low traffic so there is no need for more, yet :)

m121
2011-01-06, 04:19 AM
I just want to add, that we solved the problem by connecting FRGF to FSMBs 3. connector instead of connector used for 2nd release system module+ 2nd release radio module, like we used at beginning.