PDA

View Full Version : T28密技!今天无意从自己电脑里找到,拿出来,对买T28刷TEMS的人有用



phkchris
2007-04-27, 09:05 PM
*#06# for checking the IMEI (International Mobile Equipment Identity)

>*<<*<* for checking the firmware revision information (software release)

>*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

The Service Provider (SP) Lock
The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**< Lock to Network? if pressing yes you have 5 attempts to enter NCK.

<**<< Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK.

Warning: Your phone can be locked to a service provider FOREVER by doing this! If an invalid code is entered all five times, the menu will exit and be deactivated! Any further attempt to activate the NCK/NSCK lock Menu will result in the response "Not allowed"! However the NCK/NSCK lock can be recover through a direct clearing in the EEPROM.

Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.

phkchris
2007-04-27, 09:46 PM
Enter to phone menu without SimCard - after Wrong PIN: press NO:
* * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
这个适合所有电话

gansy_cd
2007-05-08, 06:56 PM
什么意思啊?我搞不懂呢

firewise
2007-06-16, 05:46 PM
只有部份,现在还可用......

summerblue52
2007-06-19, 01:21 PM
我也搞不懂,没用过。。

717_929
2008-04-09, 12:48 AM
自己现在水平太低啊 不知道什么意思啊

亮仔
2008-06-01, 06:10 PM
真的是好秘籍,想起以前玩游戏时,经常找秘籍玩。

knn1980
2008-06-04, 10:45 PM
水平有限,看不懂。。。。。。