Can install Actix on windows Vista ???

[liukang]

Hi all, anyone can help me install Actix on windows Vista 32 bit ???
I try install Actix on this OS but Sentinel services can't work. Please help me
Thanks to all friend !!!

[eevil_inside]

in GA 10 4.04 it added Windows Vista support so i think i should work . GA 10 GA 11 both should work.May be Sentinel Crack/Emulator which is with Software does not Support Vista.

[zhjd]

or use the original license file .^_^.

[liukang]

Yeah, when running SENTINEL Emulator 2007 at Driver tab i can't Install Driver. Anyone can help me resolve this problem ???

[liukang]

In 'Driver Status': Driver is not installed or cannot be started. Please try to INSTALL services
I don't know how to resolve this problem, please help me!!!

[eevil_inside]

Are us sure u are doing the following steps.



6. run "edgespro11.exe"; In "edgespro11.exe":
7.1. go to tab "keygen"
7.2. In "Dongle Type" choose "Sentinel"
7.3. In "License Validity" set "Starts at" and "ends at" dates; for example first of 2008 and end of 2008
7.4. Click "Generate"; Copy the Code shown in the lower part of the window.
7.5. don't close this application now

8. run "SENTEMUL2007.exe"; In "SENTEMUL2007.exe":
8.1. go to tab "Driver"; Click "Install Driver" button
8.2. go to tab "Emulator"; Paste the code you have copied in step 7.4 in the "License" box
8.3. Click "Start Service"
8.4. go to tab "Dongles"; Click the button "Load Dump" and choose the file"actix_full.dng"
8.5. go to tab "Emulator"; you see a code in the box under title "Licensed Dongles"; Copy that

9. Go to "edgespro11.exe" and go to tab "Keygen"
9.1. Paste the code you have copied in the box I mention in below:
In the section "Licensed dongles" you see four small boxes. right-up, right-down, left-up, left-down
Copy this code in the box Left & down box (left-down)
9.2. Everything is finished and now you can run ACTIX program from it's shortcut on desktop

10. If you see error message that you don't have License; Restart the computer and run ACTIX again.
10.1 If it gives error again, do all steps from 4 to 9 again (Overwrite old files too) and we hope it runs this time
10.2. As a recommendation, in step 5, Copy "lservrc" file in to all following folders too:
C:\Documents and Settings\All Users\Application Data\Actix
C:\Documents and Settings\All Users\Application Data\Actix\Analyzer
C:\Program Files\Actix\Analyzer

Be success
riverstreamer;

[clive]

Great Tutorial buddy.

[eevil_inside]

well thanks to Riverstreamer , i just copy paste it :-)

[liukang]

hi eevil_inside, i do these step but can't crack Actix in Windows Vista. First times i think restart windows can resolve problem, then i restart windows but nothing change!!!
I can't install driver in driver tab (SENTINEL Emulator) thus cannot load dongle file (.dng).
Have you other way to install driver (SENTINEL Emulator) ???

[eevil_inside]

long way
use VMware work station and install winXP sp2 there and then install Actix there and it should work there.
Looks like Emulator/crack is not supported by Vista.

[krobelux]

dear liukangs
i have installed Actix in my vista and its running normally
first before you run senemul2007 you maust change compatibility to windows XP SP2 and make it run as administrator and do like SENTEMUL2007 for edgespro11
and after you change the compatibility its run normally.

[ Last edited by krobelux at 2008-9-24 10:22 ]

[atit]

dear
thanks for the help for this nice forum

[eevil_inside]

Good news !! for Vista Users

[jampang]

it should be work good in vista for GA10 above

[liukang]

Oh, thanks krodelux. I will try again, i hope it will crack success

Thanks !!!

[rnpopt]

u r grt man!!! Its working perfectly...I changed the compitability as u said
now its working in windows 7.
happy.........


dear liukangs
i have installed Actix in my vista and its running normally
first before you run senemul2007 you maust change compatibility to windows XP SP2 and make it run as administrator and do like SENTEMUL2007 for edgespro11
and after you change the compatibility its run normally.

[ Last edited by krobelux at 2008-9-24 10:22 ]