PDA

View Full Version : TEMS firmware pocket



jew2jew
2008-09-16, 12:01 PM
I think all firmware TEMS Pocket are in forum for new phone model (k600,k800,k790,z750) is CID=49 and Brown EPROM. but general commercial phone is
RED EPROM.
How to find phone Bronw EPROM?

jew2jew
2008-09-16, 12:37 PM
RED: The certificate NETWORK is for end user. This one is the normal color that we will find on any telephone. This color is for software and
it does not have any meaning of the hardware. The certificate colors do not have any relation with possible errors of software on the telephone.
BROWN: The certificate Brown is for development. If we want to release, to flashear, to repair or to touch in any thing in software the certificate
must be BROWN. Exactly why all the programs the tools first turn the telephone for Brown and after completing the operation for Network again.
The certificates Brown only work with cables on watch, so it is impossible to update a moving body with certificate Brown in SEUS (Sony E*******
Update Service).
BLUE: Certificate BLUE is used for telephones that do not have a complete software or that are developing. The telephone is a test version or is
in exhibition somewhere, is really difficult to find this type of telephones.

jew2jew
2008-09-16, 12:41 PM
CID=Identity card of the Client: It is a unique number, that identifies the platform of a client of E******* moving bodies. It is kept within the OTP
(an area of programming memory). When you are going to flashear verifies that the Cid of the moving body is equal to the file that you have loaded.
Certain models (the case of the K750 for example) appear in but of a CID, since are some models with a CID, and others with another one

jew2jew
2008-09-19, 04:46 PM
SE Toll GUI v0.91380069

Code:
- profiles now correctly load settings for models when switching only tabs.
- return to old scheme cid/color detection for db2020 usb operations (some users
reports that phone COLOR/CID can't be detected)
- added some models (w880,k550) so yes, yes. you must again remade profiles.
- db2020 empyboard filling supported (because i saw my "friend" on kukuruzer
takes money for that,while it is standalone process and not requires any
special moves, that is unfair and i shall fix it).
quick howto:
-go to empty tab
-select ANY db2020 model
-fill desired IMEI (or not fill if you have not want to write it)
-check WRITE OTP (or not check if you not want to write it)
-select CID49 (required)
-select needed brown2red erom
-press FLASH
-phone now complete retail (especially if you wrote otp) and must be
serviced as any retail db2020 phone (note - NOT USE EROM UPGRADE)


wow!!!!!!!!!!!!!!!!!!!!!

miro
2008-09-26, 11:13 PM
good tek dicussion

mervinaiene
2008-10-02, 11:21 AM
nice discussion.. new things to learn..

torex
2008-10-02, 08:01 PM
what's the point?

parto_tegal
2008-10-08, 08:11 AM
SE Toll GUI v0.91380069

Code:
- profiles now correctly load settings for models when switching only tabs.
- return to old scheme cid/color detection for db2020 usb operations (some users
reports that phone COLOR/CID can't be detected)
- added some models (w880,k550) so yes, yes. you must again remade profiles.
- db2020 empyboard filling supported (because i saw my "friend" on kukuruzer
takes money for that,while it is standalone process and not requires any
special moves, that is unfair and i shall fix it).
quick howto:
-go to empty tab
-select ANY db2020 model
-fill desired IMEI (or not fill if you have not want to write it)
-check WRITE OTP (or not check if you not want to write it)
-select CID49 (required)
-select needed brown2red erom
-press FLASH
-phone now complete retail (especially if you wrote otp) and must be
serviced as any retail db2020 phone (note - NOT USE EROM UPGRADE)


wow!!!!!!!!!!!!!!!!!!!!!

Hi
I think the above procedure is about to do "empty fill" your developer (brown) phone, not on how to make it brown.
Two ways to make it brown:
1. Replacing the flash IC,
2. Do Test Point.
But SETool supports Cross-CID Flashing now, then no need to convert the red phone become brown to do flash brown firmware into it.
Regards,
parto_tegal

gsmart
2008-10-19, 10:30 PM
@parto_tegal

Does the cross flash programming , that u said work on Z750 TEMS flashing?

can you tell me the procedure..

Tnx