PDA

View Full Version : Go/NOgo drivetesting



sakibd2k
2010-08-21, 11:24 PM
Hi all,

I have very few simple question. Is there anythng like Go/NoGO
drive testing ? Than what is it?

And what could be basic difference among the tools Actix analyzer,
Tems investigation and Agilent and others if any?

Thank you.

Blacktiger
2010-08-22, 06:36 AM
First of All Agilent and Tems are the tools for RF Data Collection. Most of vendor using this 2 tools.

Actix is Post Processing Tool, Once data are available you can load data into actix and check the data.


Hi all,

I have very few simple question. Is there anythng like Go/NoGO
drive testing ? Than what is it?

And what could be basic difference among the tools Actix analyzer,
Tems investigation and Agilent and others if any?

Thank you.

ppsec123
2010-08-22, 01:45 PM
go no go drive testing is associated with pre launch optimization. usually KPI reports are generated using Actix or similar post processing tools for site acceptance.

Tems and agilent are data collection tools.

D33T0X
2010-08-23, 02:09 AM
Go/No Go drive testing depends on the status of your network... do you have enough sites up for testing, etc. There's a difference between tools collecting air data and the ones used for post-processing. They are all expensive but you can live without post-processors and do everything in Mapinfo (you will need skilled engineers for that). Actix is a very useful tool but costs a lot of money...

sakibd2k
2010-08-24, 02:04 AM
So go/nogo drive testing is if i have enough sites up for testing.
If enough sites are up than drive tester decide whether to go for ride is that it?

Thanks Everybody i have my answers.