PDA

View Full Version : Mobile Phone Codes (Nokia)



pathloss
2010-08-09, 05:48 AM
Hi, please find below some phone codes for Nokia devices. Don't forget the thanks :D

Mobile Phone Codes

These Nokia codes will work on most Nokia Mobile Phones (1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talktime is reduced my approx. 5%
(2)#3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )
(3)*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
(4)*#4720# Deactivate Half Rate Codec.
(5)*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )
(6)*#9999# Phones software version if *#0000# does not work.
(7)*#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )
(8)#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).
(9)#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).
(10)#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).
(11)#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols).
(12)*#147# (vodafone) this lets you know who called you last.
(13)*#1471# Last call (Only vodofone).
(14)*#21# Allows you to check the number that "All Calls" are diverted to
(15)*#2640# Displays security code in use.
(16)*#30# Lets you see the private number.
(17)*#43# Allows you to check the "Call Waiting" status of your phone.
(18)*#61# Allows you to check the number that "On No Reply" calls are diverted to.
(19)*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls
are diverted to.
(20)*#67# Allows you to check the number that "On Busy Calls" are diverted to.
(21)*#67705646# Removes operator logo on 3310 & 3330.
(22)*#73# Reset phone timers and game scores.
(23)*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.
(24) *#7760# Manufactures code.
(25)*#7780# Restore factory settings.
(26)*#8110# Software version for the nokia 8110.
(27)*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. ( Favourite )
(28)*#94870345123456789# Deactivate the PWM-Mem.
(29)**21*number# Turn on "All Calls" diverting to the phone number entered.
(30)**61*number# Turn on "No Reply" diverting to the phone number entered.
(31)**67*number# Turn on "On Busy" diverting to the phone number entered.

Regards

gc_sw
2010-08-11, 09:45 PM
some of the codes are for old versions of NOkia but all of them are quite important codes :)

ritgail
2010-08-11, 09:47 PM
good share, can you show the motorola network measurements code

naguii
2010-08-11, 10:26 PM
mercii bcp , thank's a lot friend

Midou

pathloss
2010-08-12, 04:27 AM
good share, can you show the motorola network measurements code

Here are codes which were found for some Motorola devices.

Motorola Droid
From the dial pad key in: *#*#4636#*#* quickly. This takes you to a menu. Select “Phone info” Signal Strength is the 7th line down.

Motorola M800 Bag Phone, V60, 120, E310, C331, 343, 353 (most older Motorola non-GSM phones)
Quickly press MENU 073887*. SECURITY CODE= 000000 (six zeros) or 123456. Press OK. Scroll to TEST MODE, SELECT or CHANGE. Scroll to ENABLED, SELECT. Signal strength is 3rd number down on the left side of screen. To exit, quickly hit MENU, then the button directly to the left of MENU.

Newer Motorola CDMA phones (v262, v710, E815, V265, V3 RAZR, KRZR, etc)
Quickly press MENU 073887* (0SETUP*). For RAZR, KRZR use #073887*. For V323, V325 use CLR 073887*. Default Security Code: 000000 or 12345. Press OK or SELECT. From the menu, select TEST MODE. From the next screen highlight ENABLED. Press OK or SELECT. The phone will then return to TEST MODE MENU. Power the phone off and then back on. The signal strength number will be on the 3rd line down followed by the letters MN/A, H/A or HN/A. To exit, press MENU followed by the left soft key. This allows you to toggle in and out. For RAZR, KRZR, V325, V323 press CLR and then the upper left soft key. For newer models such as the E815 and RAZR it may be necessary to dial a fake phone number to get the signal reading to update.

Motorola KRZR K1 (GSM)
Press CLR 073887* very quickly. Security Code 000000. Highlight "Test Mode" and press OK. Highlight "Enabled" and press OK. The phone will return to the menu. Power the phone off and on again. Phone will show signal strength on the second line down, last number (Example 67-061B. -061 is the signal strength). To toggle in and out: Press # and then the upper left key with the dot on it. To Exit: Follow above instructions and choose "Disabled."
Please Note: If "Browser Setup" is the only option in the menu, then test mode is not available on your phone.

Motorola RAZR VE20
From phone main screen: Quickly press #073887* (Enters Programming Code) Display shows: “Enter Code ******”
Enter Security Code: 000000 (unless you have changed the default) Press “Done” (right soft key) Display shows: “Programming Menu” Scroll to “Test Mode” OR Press 0 Press “Center Key” (OK/Select) Display shows: “Test Mode Status” If “Disabled” is selected, scroll to “Enabled” and Press “Center Key”
(The instruction in some sources to next power-cycle the phone
DOES NOT WORK on the VE20.) Press “Back” Press “Back” Press “Call”

Motorola C290 (Sprint)
Enter ##33284##. Enter Field Service Code, 040793 and press OK. Signal strength is 3rd line down in from of MN/A or HN/A. Turn phone off and on to exit.

Motorola Q (Verizon)
Enter ##*, then press SEND. Highlight CALL STATUS SCREEN and press Ok. Signal strength is the first number on the 3rd line down. Note: this screen also shows EVDO data readings. Press OK and then EXIT to exit.

Motorola Q (Sprint)
In phone mode, enter ##33284#. Highlight CALL STATUS SCREEN and press Ok. Choose EXIT option to exit.

Motorola V551, V555, V557 (GSM)
Press Menu 073887* VERY QUICKLY. Security code 000000. Highlight “Test Mode” and press OK. Highlight “Enabled” and press OK. The phone will return to the menu. Power the phone off and on. Phone will show signal strength on the second line down, last number. For example, 67-061B indicates a -061dBm received signal strength. To toggle display on/off press Menu and then the left softkey. To Exit follow instructions above but chose “Disabled.” Note: If “Browser Setup” is the only option in the menu then test mode is not available on your phone.

Motorola StarTac
Press FCN00** very quickly. Continue to press 83786633 and the STO button. The phone should display US. (If not, the FCN00** wasn’t done fast enough). Press 45# to display the signal strength. This number is not actually a dB reading, but is referencing the dB strength. 45# should be pressed every time you wish to see the updated signal reading. The signal strength is between 65 and 150. Signal is the best at 150. To exit test mode, press 01#.

Motorola T720, T721, T730, T731
Follow the process for V60 phones. Turn off phone off, then back on. Press MENU and the button left of the MENU button in quick succession. The signal strength is the 3rd number down on the left side.

Motorola W315
Quickly press Clear (C) 073887*. Security Code: 000000. Press OK. Select “TEST MODE” from the Programming Menu. Press CHANGE, highlight “Enable” and press SELECT. The phone will return to the Programming Menu. Pres END (Red Key). Test mode will appear automatically. Signal strength is the first set of numbers on the 3rd line down. To exit, follow the procedure above but choose “Disable” instead of “Enable”.

Blacktiger
2010-08-30, 04:06 AM
Can anyone shared for HTC windows phone?