PDA

View Full Version : Rel 2.8.3



borelij
2010-08-06, 09:20 PM
New release is out today ... :)

PM for DL link ... I will post it anyway in a few days


Didn't try if med is still working on this release ...

Rep and thx appreciated

cheers

borelij
2010-08-09, 04:58 PM
Hi,

enjoy latest version of Atoll 2.8.3:

http://www.4shared.com/file/yCm1t-QF/Atoll283_3451.html

Pass is listed in pass section of the forum.

Please share experience about ******** :)

cheers

telwind
2010-08-09, 06:29 PM
this rel is not working with emu by bassem
@ Bassem, could you help?

aosan
2010-08-10, 06:45 AM
Hi,

enjoy latest version of Atoll 2.8.3:

http://www.4shared.com/file/yCm1t-QF/Atoll283_3451.html

Pass is listed in pass section of the forum.

Please share experience about ******** :)

cheers


the file looks corrupted, I dont know if happend only with me.....pls,,can you upload it again

intros
2010-08-10, 02:53 PM
the file looks corrupted, I dont know if happend only with me.....pls,,can you upload it again

The archive is fine! No problem at all.

aosan
2010-08-10, 07:33 PM
The archive is fine! No problem at all.


then, why I still having this

borelij
2010-08-10, 07:37 PM
What is size of file? Should be 56,235 KB (57,584,370 bytes)

aosan
2010-08-10, 07:40 PM
What is size of file? Should be 56,235 KB (57,584,370 bytes)

yes, it is 56,235 KB.

Roman99
2010-08-10, 08:09 PM
then, why I still having this

It works for me.
Check your archive.
2471b76e5db2fac3455ff2420f69a6e5 *Atoll283_3451.zip
Or may be your WinRAR is too old...

vivainter
2010-08-10, 08:16 PM
Any news for ******** ?

Cepillo
2010-08-10, 08:55 PM
yes, it is 56,235 KB.

use 7zip tool (it's freeware)

borelij
2010-08-30, 10:49 PM
Any news about ******* for this rel?

chhers

kamy
2010-08-31, 12:20 AM
check this link
http://www.4shared.com/file/TyTRLAdK/Atoll283_3451.html

nothing news because it works

forumuser-2008
2010-08-31, 01:21 PM
check this link
http://www.4shared.com/file/TyTRLAdK/Atoll283_3451.html

nothing news because it works

What do you mean "it works"?
I don't see any ******** in winrar.

kamy
2010-08-31, 03:05 PM
What do you mean "it works"?
I don't see any ******** in winrar.

why do you have to see ********?

forumuser-2008
2010-08-31, 03:34 PM
why do you have to see ********?

:)....I have download it. How can I use it?

borelij
2010-08-31, 04:26 PM
this rel is not working with emu by bassem
@ Bassem, could you help?



check this link
http://www.4shared.com/file/TyTRLAdK/Atoll283_3451.html

nothing news because it works

So ... can anybody confirm (screenshot) working rel 2.8.2 3451 ?

forumuser-2008
2010-08-31, 04:56 PM
So ... can anybody confirm (screenshot) working rel 2.8.2 3451 ?

This is 2.8.3

Am I right?

borelij
2010-08-31, 05:11 PM
This is 2.8.3

Am I right?


Yes, sorry, 2.8.3 of course

forumuser-2008
2010-08-31, 06:05 PM
Yes, sorry, 2.8.3 of course

So Guys...:)

Is there any way to use this tool?

gogotchiya83
2010-09-27, 05:53 AM
Can you share the working "SX32W.DLL"?
TKX in advance

Thewind
2010-10-12, 10:36 PM
Can you share the working "SX32W.DLL"?
TKX in advance

Try this, work fine with 2.8.1

vivainter
2010-10-13, 12:07 AM
Doesn't work foe vs 2.8.3 ( winXP)

jbada
2010-10-17, 01:05 AM
Hi,

Could you tell us how we can update and use this new version for Atoll Rel 2.8.3 ?
It works to change the DLL?
Many Thanks

alibushehri
2010-10-17, 12:15 PM
Dears,

I still have problem with c***ing this version (Maintenance message)
Can anyone help me?
Thanks in advance

Processor
2010-10-19, 12:39 AM
Try this, work fine with 2.8.1

Hey bro....you should adhere to forum rules by using a default password most especially when you charge some credits.

Thank you.

Thewind
2010-10-20, 01:18 AM
Hey bro....you should adhere to forum rules by using a default password most especially when you charge some credits.

Thank you.

Pls check my default password

Processor
2010-10-20, 05:41 PM
Oh well, apparently you just posted that but you may try it yourself and see if it works cos it doesnt.

Your defaultpass = DefaultPass

telwind
2010-10-21, 01:20 AM
Oh well, apparently you just posted that but you may try it yourself and see if it works cos it doesnt.

Your defaultpass = DefaultPass

It works fine. Make sure you download the latest update

abirofa2
2010-10-21, 12:13 PM
Try this, work fine with 2.8.1

It's not work in Atoll 2.8.3.

BR,
Abby

xcatas
2010-11-12, 10:14 PM
any news of working med for 2.8.3?

kin12345
2010-11-17, 12:03 PM
Try this, work fine with 2.8.1

can you please tell us how can we update n use it on this version pls bro?

telwind
2010-11-17, 12:48 PM
can you please tell us how can we update n use it on this version pls bro?

run the installer that all. the latest installer in this forum.

kin12345
2010-11-17, 12:53 PM
run the installer that all. the latest installer in this forum.

is the version 2.8.1.3095 or more latest one though?

telwind
2010-11-17, 12:58 PM
is the version 2.8.1.3095 or more latest one though?

2.8.3 is available here http://www.finetopix.com/95262-post2.html

kin12345
2010-11-17, 01:02 PM
2.8.3 is available here http://www.finetopix.com/95262-post2.html

Bro, thanks for the link. I had this version but it seems the dll is not working. Do I need to do something else to make it work? Pls kindly share.

Jerry
2010-11-17, 11:52 PM
To me 2.8.1 is enough. there're not much advances in new release.

freqzt
2010-11-18, 11:21 AM
To me 2.8.1 is enough. there're not much advances in new release.

What about 2.8.0? What is the different? Until now I still can't install 2.8.1, 2.8.2, or 2.8.3. I think 2.8.0 is already support LTE, CMIIW.

jbada
2010-11-20, 09:23 PM
Hi

Could you share Atoll Rel 2.8.1

Thanks

telwind
2010-11-21, 01:37 AM
Hi

Could you share Atoll Rel 2.8.1

Thanks

already posted in this forum.

mimoX
2011-01-16, 02:24 PM
anybody got info/news/update on *M*E*D* of this version 2.8.3.
i just got v2.8.2 b3333 working well.. ver later than this not working..

Cepillo
2011-01-16, 03:29 PM
anybody got info/news/update on *M*E*D* of this version 2.8.3.
i just got v2.8.2 b3333 working well.. ver later than this not working..

have a similar problem :hug: and im expecting the solution too

ChristopherAlbertini
2011-01-16, 08:02 PM
Hi Thewind,

Can you please update your password?
The default one is not working.

mimoX
2011-01-17, 03:05 PM
due to lot of request on ver 2.8.2 b3333 *M3D1C1N3*, hereby i attached the required reg (mkey).
the reg is for mkey emulator. search in the forum how to use it.

ChristopherAlbertini
2011-01-17, 06:53 PM
Could you please share the Atoll Atoll v2.8.2 b3333 software too?

mimoX
2011-01-18, 11:04 AM
for those want to download AT0LL v2.8.2b3333, please refer to link attached.

ChristopherAlbertini
2011-01-18, 11:45 AM
Hi Mimox,

Thanks for the file but please note that I am getting the following message after activating the key using MK 8.2.4:

"Protection key access error. Check if the key is installed, driver is installed,..."

I am using windows 7 and I wonder if it is due to the windows version.

Could you please support

mimoX
2011-01-18, 01:02 PM
Hi Mimox,

Thanks for the file but please note that I am getting the following message after activating the key using MK 8.2.4:

"Protection key access error. Check if the key is installed, driver is installed,..."

I am using windows 7 and I wonder if it is due to the windows version.

Could you please support

the reg is for use with mkey emulator. search around how to use the mkey.
i'm using the win7 as well.

jbada
2011-01-23, 12:55 AM
Hi Mimox,
Could you tell us how where is the reference to install 2.8.2.3333?

Thanks in advance

ChristopherAlbertini
2011-01-23, 03:07 AM
Hi,
The link is available in the post

mimoX
2011-01-23, 12:09 PM
Hi Mimox,
Could you tell us how where is the reference to install 2.8.2.3333?

Thanks in advance

well, installation is simple. just run the exe.
only a bit tricky to apply the license.
well you have to run the multikey emulator. apply the reg. install driver. then restart the multikey emulator.
if installed correctly, you'll see this photo in your devices panel. (if win7)

i shall provide later a step by step instruction.

mimoX
2011-01-23, 12:38 PM
here instruction how to apply the reg (mkey).


download mkey 32bit from attachment

download sentinel latest drivers from here (http://www2.safenet-inc.com/support/tech/latestdriver.asp)

1> install sentinel drivers

2>open the mkey folder, run install.bat, it will prompt you to install drivers, say yes and you'll notice a new drivers has been found

3>click on the reg (http://www.finetopix.com/attachments/atoll/13496d1295244310-rel-2-8-3-at0ll-mk3y-v282b3333.rar) (register the key to registry), then go to mkey folder and click restart.bat

check your device panel. the key should be installed (http://www.finetopix.com/attachments/atoll/13661d1295752045-rel-2-8-3-key.png).
That's all.

jbada
2011-01-24, 12:16 AM
Hi MimoX

Thank you very much

Now it is working

mimoX
2011-01-24, 12:34 AM
have a similar problem :hug: and im expecting the solution too
@Cepillo, you should visit Forbidden City my friend. i found somethin there.

vasili_koslov
2011-02-11, 05:00 PM
Anyone have a licence file for Atoll 2.8.3? Please share it.

kamy
2011-02-11, 06:06 PM
Anyone have a licence file for Atoll 2.8.3? Please share it.

it existed on the forbidden city, keep trying to access this area:D

winforce
2011-02-11, 07:08 PM
Hi all,

any body successfully run atoll 2.8.3 in window 2000.i m not able to successfully run install.bat in the mkey folder (devcon.exe is not an application win32 available). wht would be the reason ...

pls help me

blade
2011-04-05, 02:57 PM
On the other hand. I had tried the installation steps which was given in previous messages. The ******** did not work on win7 64bit.

Anyone have a med for win7 64 bit?



Hi all,

any body successfully run atoll 2.8.3 in window 2000.i m not able to successfully run install.bat in the mkey folder (devcon.exe is not an application win32 available). wht would be the reason ...

pls help me

lamhd_bk
2011-05-05, 07:10 PM
here instruction how to apply the reg (mkey).


download mkey 32bit from attachment

download sentinel latest drivers from here (http://www2.safenet-inc.com/support/tech/latestdriver.asp)

1> install sentinel drivers

2>open the mkey folder, run install.bat, it will prompt you to install drivers, say yes and you'll notice a new drivers has been found

3>click on the reg (http://www.finetopix.com/attachments/atoll/13496d1295244310-rel-2-8-3-at0ll-mk3y-v282b3333.rar) (register the key to registry), then go to mkey folder and click restart.bat

check your device panel. the key should be installed (http://www.finetopix.com/attachments/atoll/13661d1295752045-rel-2-8-3-key.png).
That's all.

This is for rel 2.8.2 only!

jbada
2011-05-06, 01:31 AM
Hi,

The Mimox med posted in this Thread is only valid for the version 2.8.2.

Could you please share the med for the version 2.8.3?

Thanks in advance

miladsafa_ir
2011-07-02, 04:50 PM
Dear Friends,

Does this ******* include ACP and AFP modules?

rejreyes
2011-07-26, 12:46 AM
help wanted! 2.8.3 register key... :D

dane_2k2
2011-07-26, 12:50 AM
nice...................