PDA

View Full Version : Question Daily network parameters check



justdream
2010-08-03, 06:16 AM
Experts, I would like to check daily my network parameters.....
I mean to detect the changed value as the network is big and some guys make changes (so it's important to do this task daily) :(

my vlookup and compare method takes too long time, please advice me :hug:

huaweiradio
2010-08-03, 10:40 AM
I think you need to get a command log from OSS (Only Changed Commands) from OSS Admin.

oswe
2010-08-03, 11:45 AM
hi man,
what we have here is .mdb based.
we import the text files (before parsing them with text processor) into a database and then compare with queries. It works good I dont know how big is your network but I guess this method is fine.
regards !:)

justdream
2011-07-31, 01:03 AM
which software you are using?

_lisi4king
2011-07-31, 02:19 AM
Experts, I would like to check daily my network parameters.....
I mean to detect the changed value as the network is big and some guys make changes (so it's important to do this task daily) :(

my vlookup and compare method takes too long time, please advice me :hug:

Yes, which vendor do you use?
For huawei it is possible to use scripts in M2000, it can check all changes, missmatching and send it to your e-mail. Very useful ;)

dk2000
2011-08-01, 11:21 AM
@_lisi4king: Can you share us this script?:(

_lisi4king
2011-08-01, 12:36 PM
@_lisi4king: Can you share us this script?:(

Sorry, but i'm not from BSS team and like i told we don't use it. I know, that it is possible and i saw how it works on another operator. Now in my company BSS team starts to investigate this issue. And i hope they will create scripts which can be really useful.

revolution
2011-08-01, 01:41 PM
You need to define first which KPI u need to monitor . second define the level of data collection and the required time . if is it daily or hourly !!
As mentioned U need to use .mdb under Access and run query .

Aslo You can do some templates / Macros to make it easy for U if using certain formulas to calculate ur KPIs

_lisi4king
2011-08-01, 02:04 PM
And i think will be very useful, if you will use part of M2000 (if you use Huawei and have M2000) - Task Management (see attached screenshot) :)

milan_recj
2011-08-05, 09:33 PM
Do you have this for E******* nodes.
Pls post.
thanks. Will add reputation.

_lisi4king
2011-08-05, 09:42 PM
Do you have this for E******* nodes.
Pls post.
thanks. Will add reputation.

If you ask me, no i don't. On my network are HW and ZTE only, so i can't help you with E///. Sorry :rolleyes:

khalids
2011-11-14, 07:33 PM
Hello There,

I know this post was sent a while back, however I need a little assistance from you.
I was checking on my M2000 and was unable to the CM & CME report. The sanp shot below shows what I have on my M2000.

How do I get the report you referred to.

Thanks in anticipation

And i think will be very useful, if you will use part of M2000 (if you use Huawei and have M2000) - Task Management (see attached screenshot) :)

justdream
2012-06-02, 01:38 AM
The smartest solution is to find tool that could compare 2 files/ workbooks regardless it's Huawei or another vendor
Hopefully, our experts could advise us

huawrx
2012-06-13, 07:20 AM
could you share by email? thanks

wernfried
2012-06-14, 05:03 AM
Hi

I mentioned already the solution we use in our networks in this thread:
http://www.finetopix.com/showthread.php?25772-Compare-network-dump-for-different-times!&p=182556&viewfull=1#post182556 (http://www.finetopix.com/showthread.php?25772-Compare-network-dump-for-different-times%21&p=182556&viewfull=1#post182556)

Simple sharing by mail is not possible, it's too big and complex. However, Alcatel-Lucent is willing to sell this tool, it is used already in a few different networks accross europe.

Regards