PDA

View Full Version : Question E******* BTS (combine two chgr from different TG)



jieyens99
2010-06-22, 10:42 AM
hi experts,
good day...

Question... this is the scenario(E******* GSM)...

Cell= 0001A (TG1 for 1st Cabinet and TG2 2nd Cabinet)

TG 1 = chgr0 and chgr1
TG 2 = chgr2

can i combine chgr1 and chgr2 from different TG?

hoping for your enlightenment on this.

thank you very much...:):)

electron
2010-06-24, 12:04 AM
hi experts,
good day...

Question... this is the scenario(E******* GSM)...

Cell= 0001A (TG1 for 1st Cabinet and TG2 2nd Cabinet)

TG 1 = chgr0 and chgr1
TG 2 = chgr2

can i combine chgr1 and chgr2 from different TG?

hoping for your enlightenment on this.

thank you very much...:):)


Hi,


Yes, it is possible you should activate TG Synchronization feature in BSC level


Regards,

jieyens99
2010-06-25, 12:05 AM
thank you very much sir....

is there feature readily available in the BSC or Operator need additional payment for this feature?

zee86
2010-06-26, 10:48 PM
operator pay for this

thank you very much sir....

is there feature readily available in the BSC or Operator need additional payment for this feature?

jieyens99
2010-06-27, 12:10 AM
ok sir, thanks...

follow up question... is there other way i can do this without activating TG synchronization feature?

electron
2010-06-27, 12:27 AM
As i know it is not possible. If you find any other standard-less solution you will increase CDR.



Thanks,
Reza