PDA

View Full Version : moshell install



jskhalid
2010-06-11, 08:20 AM
Hi , i need a certain file called moshell_install to install moshell under cyguin, if some one have it plz share


If there is also a procèdure to install moshell under cyguin step by step it will be welcome



BR

nicodrey
2010-07-04, 08:09 AM
Hi , i need a certain file called moshell_install to install moshell under cyguin, if some one have it plz share


If there is also a procèdure to install moshell under cyguin step by step it will be welcome



BR

You need the whole moshell package to install it under cygwin.
In the package you will have the moshell_install script + an tgz archive with moshell file fore solarise,linux and cygwin.
You will find this package on the forum.
Then moshell_install script will take care of everything.
Download a moshell user_guide the step to install moshell under cygwin are explained.

Hope it will help.

BR

jskhalid
2010-07-05, 04:19 AM
Hi , thx for your response , i am talking about a file called cygwin_install, according to the moshell user guide , it should be downloaded from a ericsson site link , but when i click to the link , link is dead ......

if anyone have this file plz share it...

BR

nicodrey
2010-07-05, 07:54 AM
Hi , thx for your response , i am talking about a file called cygwin_install, according to the moshell user guide , it should be downloaded from a ericsson site link , but when i click to the link , link is dead ......

if anyone have this file plz share it...

BR


just replace step 10 & 11 from user guide for installation for windows ( cygwin ) by the following actions in the file attached.
No need of this cygwin_install.txt

Let me know if you have any trouble.

BR/

jskhalid
2010-07-05, 08:15 AM
Hi , thx you for your response , when these steps done , i have the errors :
invalid option name
: invalid shell option name
could you help??

BR

nicodrey
2010-07-05, 08:50 AM
The file have to be in UNIX format.
Use dos2unix under cygwin to convert the file.
It should work.
Let me know if really necessary I will attach the files...

jskhalid
2010-07-05, 09:26 AM
Hi , thx your very much for your help, it's working know , but when i run moshell , i have a error

Something wrong??

nicodrey
2010-07-05, 09:53 AM
It should be downloaded from the node to your pc when you will connect to the node for the first time.

BR

jskhalid
2010-07-05, 09:56 AM
ah , ok thx you very much for your assistance , i still have one small trouble with ls commad :


s: cannot access –show-control-chars: No such file or directory
ls: cannot access –color=tty: No such file or directory

if you can help:D

BR

nicodrey
2010-07-05, 10:00 AM
Correct, I had the same issue.

remove the alias from the file .bashrc
alias ls='ls -hF –show-control-chars –color=tty'
I created the alias ll :
alias ll='ls -alh'

jskhalid
2010-07-05, 10:04 AM
ok , thx for help , i have a dump for rnc , i can not read it without the missing jarxml files....

For the ls issus i found it in many google forum , the strange thing that you can use dir commad:), i know it dos , but it 's working under cygwin........

Finaly it unix or dos.........getting a litle bit confused:confused:

thx

arefo1o
2010-07-09, 04:22 AM
does anyone have "RNC_NODE_MODEL_J_3_45.xml" file? plz share ...

student1984@bk.ru
2010-08-02, 06:49 PM
In this example of instalation moshell, file "cygwin_install" not needed. Try

student1984@bk.ru
2010-08-02, 06:56 PM
does anyone have "RNC_NODE_MODEL_J_3_45.xml" file? plz share ...

Please add rep and thanks

cluritz
2010-08-19, 06:46 AM
You need the whole moshell package to install it under cygwin.
In the package you will have the moshell_install script + an tgz archive with moshell file fore solarise,linux and cygwin.
You will find this package on the forum.
Then moshell_install script will take care of everything.
Download a moshell user_guide the step to install moshell under cygwin are explained.

Hope it will help.

BR

where does the moshell_install download link? could anyone share direct link to moshell_install file program? or please send to my email alfa171[at]gmail[dot]com please :D :D

einsin
2010-09-28, 07:38 AM
Hi Guys I share this file for install Procedure Moshell

[Only registered and activated users can see links]

ntport
2011-02-18, 06:27 AM
just replace step 10 & 11 from user guide for installation for windows ( cygwin ) by the following actions in the file attached.
No need of this cygwin_install.txt

Let me know if you have any trouble.

BR/

How to download this file ?

thanks

ugyenkp
2011-05-16, 02:40 PM
Can any one share cygwin_install.txt?


Thanks

ugyenkp
2011-05-17, 04:46 AM
This is cygwin setup files but i don't have cygwin_install.txt and if you have it please share with me.

bukkys
2011-07-26, 12:07 PM
just replace step 10 & 11 from user guide for installation for windows ( cygwin ) by the following actions in the file attached.
No need of this cygwin_install.txt

Let me know if you have any trouble.

BR/
please i need assistance download the file

bukkys
2011-07-26, 12:09 PM
In this example of instalation moshell, file "cygwin_install" not needed. Try
please i need here, am getting the message;
bukkys, you do not have permission to access this page. This could be due to one of several reasons:


Your user account may not have sufficient privileges to access this page,you need to be Member group user before you can download attachments or post in most of sections. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.

how can i download the file

ivandgreat
2011-08-02, 09:04 PM
at last.. i finally installed it..

parshav
2011-09-09, 08:45 PM
I have attached docs for complet moshell installation.. Pls provide reps and thnxs if like it.

linhhy
2011-10-14, 06:35 PM
Please add rep and thanks

does anyone have "RBS_NODE_MODEL_N_1_14.xml" file or any "RBS_NODE_MODEL_xxx.xml" file? plz share ...

Thanks!

ntport
2011-10-14, 08:26 PM
Try this, if it is not working I will send you another one.

linhhy
2011-10-14, 11:27 PM
Try this, if it is not working I will send you another one.

Hi ntport,

RNC_Node_Model's already had in this topic by some one shared. I've missed RBS_Node_Model_xxx. xml file. Please share if can!

Thanks!

ntport
2011-10-14, 11:38 PM
I have attached RBS file.

linhhy
2011-10-16, 01:38 PM
I have attached RBS file.

Hi ntport,

Moshell for RNC require 2 files, RNC_NODE_MODEL_M_1_43.xml và RNC_NODE_MODEL_M_1_43.xml.cache. I think It should be same for RBS.
Your attached file is RBS_NODE_MODEL_K_2_3.xml.cache file. Could you share RBS_NODE_MODEL_K_2_3.xml file.

many thanks!

ntport
2011-10-16, 10:32 PM
Hi,
Sorry I found only Cache version.

cheers,

adam eric
2011-10-29, 02:42 PM
just replace step 10 & 11 from user guide for installation for windows ( cygwin ) by the following actions in the file attached.
No need of this cygwin_install.txt

Let me know if you have any trouble.

BR/

hai...im new here and have the same problem...i cant view the file yet?how do i get access in this forum to download the file u post?really need it...

Yaaqob1982
2011-10-29, 08:50 PM
Hi ntport,

Moshell for RNC require 2 files, RNC_NODE_MODEL_M_1_43.xml và RNC_NODE_MODEL_M_1_43.xml.cache. I think It should be same for RBS.
Your attached file is RBS_NODE_MODEL_K_2_3.xml.cache file. Could you share RBS_NODE_MODEL_K_2_3.xml file.

many thanks!

which directory should i but this file RBS_NODE_MODEL_K_2_3.xml?

spiderman
2012-01-03, 08:01 AM
Cygwin & Moshell Installation Manual
It was so easy and always be worked for me :

Getting and installing cygwin :
1. Go to the website [Only registered and activated users can see links]
2. Click on Install Now
3. Save the setup.exe file, then execute it.
4. Choose Install from internet, click Next
5. Root Directory C:\cygwin (It is not recommended to choose a different directory, especially if it contains spaces)
IMPORTANT: Default Text File Type should be set to UNIX (NOT DOS !!! otherwise ftp transfers get corrupted). Then click Next.

6. Select Internet Connection: put the proxy settings (generally use IE5 settings works with ESOE PCs). Click Next.

7. Select Packages: Add the following packages:
• under Archive select unzip
• under Interpreters select perl
• under Net select inetutils, openssh, and openssl
• under Shells select rxvt
• optional: under Editors select vim (if you want to be able to edit files with vi)

8. Click Next, install will start

9. In the directory C:\Cygwin ,double-click on the file cygwin.bat. This will startup the Cygwin window and create some files. Now close the Cygwin window.
Open an editor and edit the file cygwin.batch (MS-DOS Batch file) – click right button and edit. Delete the line: bash --login -i. At the end of the file add the following (replace xxxx with your user id):

set USER=xxxx
set HOME=/home/xxxx
set SHELL=/bin/bash
rxvt -sl 65000 -e /bin/bash --login -i

IMPORTANT:
Make sure that there are no spaces at the end of the lines otherwise the windows environment variables don’t get set correctly and your .Xdefaults file will not be read (meaning that rxvt looks horrible!).

10. Open the file C:\Cygwin\etc\profile in a text editor and add the following 6 lines at the end of the file (replace xxx with your user id!):

export USER=xxxx
export HOME=/home/xxxx
export SHELL=/bin/bash
mkdir -p $HOME
cd $HOME
source $HOME/.bashrc

11. Edit the file C:/Cygwin/etc/passwd in a text editor and make sure that there is a row with your username and home directory. If the home directory (found towards the end of the line) looks like /cygdrive/h then replace this with /home/youruserid (replace youruserid with your user id!!). This is needed for ssh to function properly.

12. Start a Cygwin Terminal window by clicking on the icon in start menu or on desktop, then run the following commands: Create the following 3 files in your /home/youruserid directory: .bashrc, .inputrc, and .Xdefaults This can be done with the commands:

touch .bashrc
touch .inputrc
touch .Xdefaults

13. Go to the directory C:\Cygwin\home\youruserid (from windows explorer) and open the following 3 files in a text editor:
In the .bashrc file, put the following lines:
Note : Delete all and copy all from .bashrc working file.

unset PROMPT_COMMAND
export PS1="\[\033[1m\][\w]\\$\[\033[0m\] "
alias ls=’ls -FX’
set -o notify
set -o ignoreeof
shopt -s cdspell
shopt -s cdable_vars
shopt -s checkhash
shopt -s checkwinsize
shopt -s sourcepath
shopt -s histappend
export PATH=$PATH:/home/yourid/moshell (Edit yourid)

The last line appends the moshell directory to your $PATH. This will enable you to call moshell from any directory.

In the .inputrc file, put the following lines:
Notes : Delete all and copy all from .inputrc working file.

set bell-style visible
set convert-meta Off
set output-meta On
set input-meta On
set completion-ignore-case on
set completion-query-items 150
set mark-directories on
set visible-stats On
set show-all-if-ambiguous On
set expand-tilde On
"\e[D": backward-char
"\e[C": forward-char
"\e[A": history-search-backward
"\e[B": history-search-forward
"\e[7~": beginning-of-line
"\e[8~": end-of-line
"\e[1~": beginning-of-line
"\e[4~": end-of-line
"\e[3~": delete-char
"\e[2~": menu-complete
"\M-[2~": paste-from-clipboard # Insert
"\M-q": menu-complete
"\C-d": delete-char
"\C-l": clear-screen
"\C-xdf": dump-functions
"\C-xdv": dump-variables
"\C-xdm": dump-macros

Note :
Type man bash if you want to get more information about what these lines do.

In the .Xdefaults file, put the following lines:
Note : Copy all from .Xdefauts working file.

Rxvt*background: Black
Rxvt*foreground: White
Rxvt*saveLines: 65535
Rxvt*termName: xterm
Rxvt*geometry: 143x64+0+0
Rxvt*loginShell: true
Rxvt*font: "Lucida Console-11"
Rxvt*cutchars: ‘"’&()*,;<=>? []{|}

These are just examples of terminal properties, you can change them to fit your needs. Type man rxvt to view all available properties.

14. Open a new cygwin terminal window. The window should be black with white text and the prompt should like this: [~]$ If not, then go through the last 4 steps again and make sure you haven’t missed out anything.

15. Moshell installation (Run program cygwin)
Follows these steps if you already have a working Cygwin environment.

• Put the moshellxxx.zip file in c:\cygwin\tmp (copy moshell7.0zip file here)
• Open the cygwin shell and go the /tmp directory. Run the following:

Cd /tmp
unzip -o moshellxxx.zip(unzip –o moshell7.0zip)
bash moshell_install

Go to foder C:/cygwin/home, and then copy moshell and moshell logfile folder from working file.

16. Running moshell for the first time
If you have set the PATH variable correctly in your ~/.bashrc file, you should be able to run moshell from any directory. E.g: moshell <ip address>

If unknown command --- go home (C:/cygwin/home/moshell) check jarxml file and copy from working jarxml file.

Ask me if there is something problem bro :D :D :D

macross
2012-01-12, 06:59 AM
23670

Hai spiderman
please help me
after install moshell

the moshell installed ok
but displayed
IOR file maye be corrupted

please help

spiderman
2012-01-12, 01:24 PM
I can't access the picture bro. while you tried connected to Node B by Moshell??? Is it Node B was integrated or new site?

Have you tried this trick?
1. Download the node’s IOR file and store it on the workstation. The node’s IOR file isfetched from [Only registered and activated users can see links]files/nameroot.ior2.

2. Check the node’s MOM version The node’s MOM is fetched from[Only registered and activated users can see links]filename> where <filename> is one of the fileslisted in the user variable xmlmomlist. The MOM version is derived from the "mim" tag in-side the MOM file, eg: <mim name="RNC_NODE_MODEL_E" version="5" release="3">becomes RNC_NODE_MODEL_E_5_3. If this MOM version does not exist on theworkstation (under moshell/jarxml directory), then it is downloaded from the node andstored in that directory. If the MOM version could not be figured out (ie. moshell could notfind any MOM on the node), the MOM specified in the moshell uservariable default_mom is used.

3. Parse the MOM and generate an internal table specifying all MO classes, attributes, andactions supported by the node.

4. Initiate CORBA communication with the node by using the information contained in theIOR file.

5. Read the FDN of the Root MO.

6. Ready to receive commands from the user

aygo
2012-01-14, 12:49 AM
Hi all,

Moshell for RNC require 2 files, RNC_NODE_MODEL_L_1_123.xml and RNC_NODE_MODEL_L_1_123.xml.cache.

please share
thanks

byaruhaf
2012-01-23, 10:49 AM
Thanks a great help

balaprashanth90
2012-02-27, 09:46 PM
Can anybody help me out to solve this issue plz???

Whenever i'm trying to connect to nodeB through MOSHELL, its having list of errors.

Kindly check out those errors, which i have mentioned below.



""-bash: alias: -FX▒: not found
-bash: alias: -FX▒: not found
[~]$
[~]$
[~]$ moshell 10.230.146.209
####################################################################
# Welcome to MoShell 7.1t #
# Finn Magnusson, Jan Pettersson #
# [Only registered and activated users can see links] #
[Only registered and activated users can see links]
[Only registered and activated users can see links]
####################################################################
cygwin warning:
MS-DOS style path detected: C:/cygwin/home/fso/moshell/moshell
Preferred POSIX equivalent is: /home/fso/moshell/moshell
CYGWIN environment variable option "nodosfilewarning" turns off this warning.
Consult the user's guide for more details about POSIX paths:
[Only registered and activated users can see links]-pathnames
Checking ip contact...OK
HELP MENU : h
BASIC MO COMMANDS : m
OTHER MO COMMANDS : n
OTHER COMMANDS : o
PM COMMANDS : p
QUIT : q
10.230.146.209> lt
120213-16:53:27 10.230.146.209 7.1t stopfile=/tmp/1612
Checking MOM version...RBS_NODE_MODEL_M_1_43
Downloading File from [Only registered and activated users can see links] to /home/fso/moshell_logfiles/logs_moshell/tempfiles/20120213-165158_5068/RBS_NODE_MODEL_M_1_43.xml.jar ...Done.
Moving file to /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.jar ...Done.
Parsing MOM: /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.jar ..................................................................Done.
Caching MOM to: /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.cache .....Done.
Compressing to: /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.cache.gz ...Done.
Fetching IOR file...Done.
Some jar files are missing. Downloading now...
Please enter Node Password:
File iaik_jce_full_us.jar not found on this node.
File jacsec.jar not found on this node.
get /c/java/CXC1320960_R73D19.jar /home/fso/moshell/jarxml/jacoms.jar ... OK
File oms.jar not found on this node.
get /c/java/CXC1721558_R73D01.jar /home/fso/moshell/jarxml/jacorb.jar ... OK
File vbjorb.jar not found on this node.
Connecting to 10.230.146.209:56834 (CorbaSecurity=OFF, corba_class=1)
**** Welcome to the Simple Mo Browser (version 3.0)!
Trying file=C:/cygwin/home/fso/moshell_logfiles/logs_moshell/tempfiles/20120213-165158_5068/ior5068
org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation com.inprise.vbroker.orb.ORB vmcid: 0x0 minor code: 0 completed: No
org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation com.inprise.vbroker.orb.ORB vmcid: 0x0 minor code: 0 completed: No
at org.omg.CORBA.ORB.create_impl(Unknown Source)
at org.omg.CORBA.ORB.init(Unknown Source)
at c.a(Unknown Source)
at e.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.main(Unknown Source)
Caused by: java.lang.ClassNotFoundException: com.inprise.vbroker.orb.ORB
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
... 6 more
Exception in thread "main" java.lang.NoClassDefFoundError: BasicConfig/ProcessingFailure
at e.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.main(Unknown Source)
!!!! One of the jar files in /home/fso/moshell/jarxml may be corrupted.
Delete the suspected jar file(s) and try to connect again.
Cannot connect to MO service, exiting...
[~]$
""

I hope i will get the solution sooner.

Thanks in advance.
Best Regards,

$Bala$

sabila
2012-02-28, 12:19 AM
copy all of data mostly in the \\moshell\jarxml of your friend that had succes
it give common jarxml of type cpp node

spiderman
2012-02-29, 04:13 AM
Same as nadila.

For this case :
""-bash: alias: -FX▒: not found
try to delete alias line on bashrc file.

Thanks

zeuscane
2012-03-01, 08:47 PM
Please ban the user AMATEPATRM
zeuscane

19walid
2012-03-02, 12:58 AM
Can anybody help me out to solve this issue plz???

Whenever i'm trying to connect to nodeB through MOSHELL, its having list of errors.

Kindly check out those errors, which i have mentioned below.



""-bash: alias: -FX▒: not found
-bash: alias: -FX▒: not found
[~]$
[~]$
[~]$ moshell 10.230.146.209
####################################################################
# Welcome to MoShell 7.1t #
# Finn Magnusson, Jan Pettersson #
# [Only registered and activated users can see links] #
[Only registered and activated users can see links]
[Only registered and activated users can see links]
####################################################################
cygwin warning:
MS-DOS style path detected: C:/cygwin/home/fso/moshell/moshell
Preferred POSIX equivalent is: /home/fso/moshell/moshell
CYGWIN environment variable option "nodosfilewarning" turns off this warning.
Consult the user's guide for more details about POSIX paths:
[Only registered and activated users can see links]-pathnames
Checking ip contact...OK
HELP MENU : h
BASIC MO COMMANDS : m
OTHER MO COMMANDS : n
OTHER COMMANDS : o
PM COMMANDS : p
QUIT : q
10.230.146.209> lt
120213-16:53:27 10.230.146.209 7.1t stopfile=/tmp/1612
Checking MOM version...RBS_NODE_MODEL_M_1_43
Downloading File from [Only registered and activated users can see links] to /home/fso/moshell_logfiles/logs_moshell/tempfiles/20120213-165158_5068/RBS_NODE_MODEL_M_1_43.xml.jar ...Done.
Moving file to /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.jar ...Done.
Parsing MOM: /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.jar ..................................................................Done.
Caching MOM to: /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.cache .....Done.
Compressing to: /home/fso/moshell/jarxml/RBS_NODE_MODEL_M_1_43.xml.cache.gz ...Done.
Fetching IOR file...Done.
Some jar files are missing. Downloading now...
Please enter Node Password:
File iaik_jce_full_us.jar not found on this node.
File jacsec.jar not found on this node.
get /c/java/CXC1320960_R73D19.jar /home/fso/moshell/jarxml/jacoms.jar ... OK
File oms.jar not found on this node.
get /c/java/CXC1721558_R73D01.jar /home/fso/moshell/jarxml/jacorb.jar ... OK
File vbjorb.jar not found on this node.
Connecting to 10.230.146.209:56834 (CorbaSecurity=OFF, corba_class=1)
**** Welcome to the Simple Mo Browser (version 3.0)!
Trying file=C:/cygwin/home/fso/moshell_logfiles/logs_moshell/tempfiles/20120213-165158_5068/ior5068
org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation com.inprise.vbroker.orb.ORB vmcid: 0x0 minor code: 0 completed: No
org.omg.CORBA.INITIALIZE: can't instantiate default ORB implementation com.inprise.vbroker.orb.ORB vmcid: 0x0 minor code: 0 completed: No
at org.omg.CORBA.ORB.create_impl(Unknown Source)
at org.omg.CORBA.ORB.init(Unknown Source)
at c.a(Unknown Source)
at e.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.main(Unknown Source)
Caused by: java.lang.ClassNotFoundException: com.inprise.vbroker.orb.ORB
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
... 6 more
Exception in thread "main" java.lang.NoClassDefFoundError: BasicConfig/ProcessingFailure
at e.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.<init>(Unknown Source)
at se.ericsson.cello.configtestclient.SimpleMoBrowser.main(Unknown Source)
!!!! One of the jar files in /home/fso/moshell/jarxml may be corrupted.
Delete the suspected jar file(s) and try to connect again.
Cannot connect to MO service, exiting...
[~]$
""

I hope i will get the solution sooner.

Thanks in advance.
Best Regards,

$Bala$

Add the following packages to cygwin:
libexpat1
libncurses9

vson
2012-04-21, 12:44 AM
Yesterday, i try to login an DUL.
The test stopped half way.
Can someone tells me what the problem could be?.
see attachment

regards,

vson26606

hasbi23
2012-06-07, 12:33 PM
i'm successfully install cygwin but i don't have moshellxxx.zip in /cygwin/tmp, where i can download it??

william.dg08
2013-01-20, 02:57 PM
You can use moshell9.0d

[Only registered and activated users can see links]


W.

PLEASE ADD REPUTATION ... IF YOU LIKE IT ;)



i'm successfully install cygwin but i don't have moshellxxx.zip in /cygwin/tmp, where i can download it??

william.dg08
2013-01-30, 04:10 AM
Besides, Now we have a new version in the forum.. 9.0n
[Only registered and activated users can see links]

ogayinde
2013-03-12, 12:00 AM
hello,
please I need a software called Moshell.if anyone has it,please could you help with it?i want to install it on my laptop operating on Windows 7 and XP.thanks.

ferdinand_frnndz
2013-03-17, 01:08 PM
Hi I've already installed moshell 7.0 but having problem when trying to access rbs..

File iaik_jce_full_us.jar not found on this node.
Try to fetch this file from a CPP5.0 node (or lower). Or set the moshell user variable "corba_class" to 2 or 3.
Cannot connect to MO service, exiting...


can somebody help?
Thanks.

posaljiporuku
2013-07-05, 07:19 PM
Or just comment that line

#alias ls=’ls -FX’
This worked! Thank you.

pankowaty
2013-09-12, 08:35 PM
to be deleted, please

aminmagherbi
2013-11-02, 01:35 AM
Hi, i can't download cygwinmoshell.txt can you plz support.

shegtech
2014-02-03, 07:36 AM
please can you send to my email or upload the application on some file hosting site thanks

shegtech
2014-02-03, 07:53 AM
Besides, Now we have a new version in the forum.. 9.0n [Only registered and activated users can see links] Hello, Please the link is in valid... Can you please upload to a file hosting site like mediafire or 4shared or dropbox thanks

sajtart
2014-02-14, 10:38 AM
I would like if someone put it somewhere public so we can download it.
I cant belive i cant find installation on net.