PDA

View Full Version : help for dumping



jskhalid
2010-06-10, 04:04 AM
Hi , i need some help regarding dumping dongle.

I have two software : first one is running on hardlock ( it's tems Inv 8.2)

the second also with hardlock.

when i lunch toro monitor to get the password and log for the first dongle ( tems ) nothing happens, no log no pass....:(

For the second software with the same toro , there is a log but no secret password , i search in the logged file and there is no fucntion dercrypt only crypt so i can not emulate it too.....:(

if someone can help......

BR

besoeso
2010-06-10, 06:01 AM
HASP HL is different to HARDLOCK

First you need to know what key type.



Hi , i need some help regarding dumping dongle.

I have two software : first one is running on hardlock ( it's tems Inv 8.2)

the second also with hardlock.

when i lunch toro monitor to get the password and log for the first dongle ( tems ) nothing happens, no log no pass....:(

For the second software with the same toro , there is a log but no secret password , i search in the logged file and there is no fucntion dercrypt only crypt so i can not emulate it too.....:(

if someone can help......

BR

sdb_moll
2010-06-10, 07:55 PM
What drivers version do you using for logging? I mean HASP drivers version

jskhalid
2010-06-23, 04:28 AM
Hi , thx for your response , the software is based on hardlock key , and drivers version is 5.40.0.0.

the problem is that Toro is logging , but dosen't show any password and any decrypt function....


Need your help

thx

gokilaravee
2010-06-23, 12:00 PM
try hasploger

yogi_saw
2010-06-23, 02:34 PM
Try with hasphl 2007 and edge solver to dump and emulate if it is hasp it will come up with pass